Explore the vast range of titles available.

Lentil (Lens culinaris ssp. culinaris) is a nutritious and affordable pulse with an ancient crop domestication history. The genus Lens consists of seven taxa, however, there are many discrepancies in the taxon and gene pool classification of lentil and its wild relatives. Due to the narrow genetic basis of cultivated lentil, there is a need towards better understanding of the relationships amongst wild germplasm to assist introgression of favourable genes into lentil breeding programs. Genotyping-by-sequencing (GBS) is an easy and affordable method that allows multiplexing of up to 384 samples or more per library to generate genome-wide single nucleotide Polymorphism (SNP) markers. In this study, we aimed to characterize our lentil germplasm collection using a two-enzyme GBS approach. We constructed two 96-plex GBS libraries with a total of 60 accessions where some accessions had several samples and each sample was sequenced in two technical replicates. We developed an automated GBS pipeline and detected a total of 266,356 genome-wide SNPs. After filtering low quality and redundant SNPs based on haplotype information, we constructed a maximum-likelihood tree using 5,389 SNPs. The phylogenetic tree grouped the germplasm collection into their respective taxa with strong support. Based on phylogenetic tree and STRUCTURE analysis, we identified four gene pools, namely L. culinaris/L. orientalis/L. tomentosus, L. lamottei/L. odemensis, L. ervoides and L. nigricans which form primary, secondary, tertiary and quaternary gene pools, respectively. We discovered sequencing bias problems likely due to DNA quality and observed severe run-to-run variation in the wild lentils. We examined the authenticity of the germplasm collection and identified 17% misclassified samples. Our study demonstrated that GBS is a promising and affordable tool for screening by plant breeders interested in crop wild relatives.

Lens ervoides , a wild relative of lentil is an important source of allelic diversity for enhancing the genetic resistance of the cultivated species against economically important fungal diseases, such as anthracnose and Stemphylium blight caused by Colletotrichum lentis and Stemphylium botryosum , respectively. To unravel the genetic control underlying resistance to these fungal diseases, a recombinant inbred line (RIL) population (n = 94, F 9 ) originating from a cross between two L. ervoides accessions, L01-827A and IG 72815, was genotyped on the Illumina HiSeq 2500 platform. A total of 289.07 million 100 bp paired-end reads were generated, giving an average 7.53-fold genomic coverage to the RILs and identifying 2,180 high-quality SNPs that assembled in 543 unique haplotypes. Seven linkage groups were resolved among haplotypes, equal to the haploid chromosome number in L. ervoides . The genetic map spanned a cumulative distance of 740.94 cM. Composite interval mapping revealed five QTLs with a significant association with resistance to C. lentis race 0, six QTLs for C. lentis race 1 resistance, and three QTLs for S. botryosum resistance. Taken together, the data obtained in the study reveal that the expression of resistance to fungal diseases in L. ervoides is a result of rearrangement of resistant alleles contributed by both parental accessions.

The success of drought tolerance breeding programs can be enhanced through molecular assortment of germplasm. This study was designed to characterize molecular diversity within and between Lens species with different adaptations to drought stress conditions using SSR markers. Drought stress was applied at seedling stage to study the effects on morpho-physiological traits under controlled condition, where tolerant cultivars and wilds showed 12.8-27.6% and 9.5-23.2% reduction in seed yield per plant respectively. When juxtaposed to field conditions, the tolerant cultivars (PDL-1 and PDL-2) and wild (ILWL-314 and ILWL-436) accessions showed 10.5-26.5% and 7.5%-15.6% reduction in seed yield per plant, respectively under rain-fed conditions. The reductions in seed yield in the two tolerant cultivars and wilds under severe drought condition were 48-49% and 30.5-45.3% respectively. A set of 258 alleles were identified among 278 genotypes using 35 SSR markers. Genetic diversity and polymorphism information contents varied between 0.321-0.854 and 0.299-0.836, with mean value of 0.682 and 0.643, respectively. All the genotypes were clustered into 11 groups based on SSR markers. Tolerant genotypes were grouped in cluster 6 while sensitive ones were mainly grouped into cluster 7. Wild accessions were separated from cultivars on the basis of both population structure and cluster analysis. Cluster analysis has further grouped the wild accessions on the basis of species and sub-species into 5 clusters. Physiological and morphological characters under drought stress were significantly (P = 0.05) different among microsatellite clusters. These findings suggest that drought adaptation is variable among wild and cultivated genotypes. Also, genotypes from contrasting clusters can be selected for hybridization which could help in evolution of better segregants for improving drought tolerance in lentil.

Low productivity of pilosae type lentils grown in South Asia is attributed to narrow genetic base of the released cultivars which results in susceptibility to biotic and abiotic stresses. For enhancement of productivity and production, broadening of genetic base is essentially required. The genetic base of released cultivars can be broadened by using diverse types including bold seeded and early maturing lentils from Mediterranean region and related wild species. Genetic diversity in eighty six accessions of three species of genus Lens was assessed based on twelve genomic and thirty one EST-SSR markers. The evaluated set of genotypes included diverse lentil varieties and advanced breeding lines from Indian programme, two early maturing ICARDA lines and five related wild subspecies/species endemic to the Mediterranean region. Genomic SSRs exhibited higher polymorphism in comparison to EST SSRs. GLLC 598 produced 5 alleles with highest gene diversity value of 0.80. Among the studied subspecies/species 43 SSRs detected maximum number of alleles in L. orientalis. Based on Nei’s genetic distance cultivated lentil L. culinaris subsp. culinaris was found to be close to its wild progenitor L. culinaris subsp. orientalis. The Prichard’s structure of 86 genotypes distinguished different subspecies/species. Higher variability was recorded among individuals within population than among populations.

Lentil (Lens culinaris ssp. culinaris), is a self-pollinating diploid (2n = 2x = 14), cool-season legume crop and is consumed worldwide as a rich source of protein (~24.0%), largely in vegetarian diets. Here we report development of a genetic linkage map of Lens using 114 F₂ plants derived from the intersubspecific cross between L 830 and ILWL 77. RAPD (random amplified polymorphic DNA) primers revealed more polymorphism than ISSR (intersimple sequence repeat) and SSR (simple sequence repeat) markers. The highest proportion (30.72%) of segregation distortion was observed in RAPD markers. Of the 235 markers (34 SSR, 9 ISSR and 192 RAPD) used in the mapping study, 199 (28 SSRs, 9 ISSRs and 162 RAPDs) were mapped into 11 linkage groups (LGs), varying between 17.3 and 433.8 cM and covering 3843.4 cM, with an average marker spacing of 19.3 cM. Linkage analysis revealed nine major groups with 15 or more markers each and two small LGs with two markers each, and 36 unlinked markers. The study reported assigning of 11 new SSRs on the linkage map. Of the 66 markers with aberrant segregation, 14 were unlinked and the remaining 52 were mapped. ISSR and RAPD markers were found to be useful in map construction and saturation. The current map represents maximum coverage of lentil genome and could be used for identification of QTL regions linked to agronomic traits, and for marker-assisted selection in lentil.

Lentil (Lens culinaris Medik.) is an economically important grain legume, yet the genetic and genomic resources remain largely uncharacterized and unexploited in this crop. Microsatellites have become markers of choice for crop improvement applications. Hence, simple sequence repeat (SSR) markers were developed for lentil through the construction of genomic library enriched for GA/CT motifs. As a result 122 functional SSR primer pairs were developed from 151 microsatellite loci and validated in L. culinaris cv. Precoz. Thirty three SSR markers were utilized for the analysis of genetic relationships between cultivated and wild species of Lens and related legumes. A total of 123 alleles were amplified at 33 loci ranging from 2–5 alleles with an average of 3.73 alleles per locus. Polymorphic information content (PIC) for all the loci ranged from 0.13 to 0.99 with an average of 0.66 per locus. Varied levels of cross genera transferability were obtained ranging from 69.70 % across Pisum sativum to 12.12 % across Vigna radiata. The UPGMA based dendrogram was able to establish the uniqueness of each genotype and grouped them into two major clusters clearly resolving the genetic relationships within lentil and related species. The new set of SSR markers reported here were efficient and highly polymorphic and would add to the existing repertoire of lentil SSR markers to be utilized in molecular breeding. Moreover, the improved knowledge about intra- and inter-specific genetic relationships would facilitate germplasm utilization for lentil improvement.

Plant biodiversity must be safeguarded because it constitutes a resource of genes that may be used, for instance, in breeding programs. Lentil (Lens culinaris Medik.) is one of the most ancient crops of the Mediterranean region. Extensive differentiation of L. culinaris over millennia has resulted in a myriad of different landraces. However, in more recent times many landraces have disappeared consequent to environmental and socioeconomic changes. To promote the survival of endangered lentil landraces, we have investigated the genetic relationship between two ancient landrace cultivated in Capracotta and Conca Casale (Molise, south-central Italy) and widely spread commercial varieties using an integrated approach consisting of studies at morphological, DNA and protein level. Seeds of these two landraces were collected from local farmers and conserved in the Molise germoplasm bank. The two local landraces were well differentiated from each other, and the Conca Casale landrace was separated from the commercial varieties at morphological, protein and DNA level. The Capracotta landrace, was well separated from the commercial varieties, except Castelluccio di Norcia, at DNA level showing a more complex and heterogeneous segregation at morphological and biochemical level. The correlation between morphological, DNA and protein data, illustrates that proteomics is a powerful tool with which to complement the analysis of biodiversity in ecotypes of a single plant species and to identify physiological and/or environmental markers.

The internal transcribed spacer (ITS) region of the nuclear ribosomal DNA from cultivated lentil (Lens culinaris subsp. culinaris) and its wild relatives was isolated and analysed for nucleotide sequence variation. Sequence divergence values ranged from no polymorphism within single species and between the cultigen and one accession of its wild progenitor (L. culinaris subsp. orientalis) to 14 base substitutions between L. nigricans and L. lamottei. Jukes and Cantor distance ranged from 0 to 1·79 %. Phylogenetic analysis confirmed the divergence of L. nigricans from all species, and the closeness of cultivated lentil to its wild progenitor, although two gene pools could possibly be identified in subsp. orientalis. Based on this study, the two recently recognized species, L. lamottei and L. tomentosus were separated from the other species. Each wild species showed peculiar autapomorphies and, in general, did not display much variation among accessions. The trees using chickpea as an outgroup formed two main clusters, one constituted by L. nigricans only and the other including the remaining taxa. Within this larger group, small subclades could be identified.

Background The membrane transporters viz. multidrug and toxic compound extrusion (MATE) and aluminum-activated malate transporter (ALMT) are associated with aluminum (Al) tolerance by accelerating secretion of organic acids, which can influence nutrient availability and stress response. However, such transporter families have not yet been reported in lentil under Al stress condition. Method and results In this study, 90 MATE and 14 ALMT genes were identified and clustered into four (MATE) and five (ALMT) subfamilies/clades with smaller subgroups. All the MATE and ALMT genes were unevenly dispersed across lentil chromosomes. Duplication analysis suggested that LcMATE gene family has expanded primarily through tandem duplication event. Collinearity of lentil with soybean suggested a close relationship between the MATE genes. The MATE promoter regions harboured many stress responsive as well as Al resistance transcription factor 1 related cis-regulatory elements. Predicted 3D (three-dimensional) structure and molecular docking revealed that 5 LcMATE proteins could bind citrate and contain amino acids related to its secretion via citrate exuding motif and other neighbouring sites. Expression analyses of LcMATE and LcALMT genes were performed using quantitative real-time polymerase chain reaction (qRT-PCR). Six genes namely, LcM1, LcM42, LcM46, LcM47, LcALMT8 and LcALMT14 responded to Al stress with varying levels of expression patterns at different time points (3, 6, 12 and 24 h). Conclusion Our findings offer thorough details on the MATE and ALMT transporters in lentils and will aid in valuable understanding for future functional studies of these transporters in generating Al tolerant cultivars.

Powdery mildew is a widespread fungal plant disease that can cause significant losses in many crops. Some MLO genes (Mildew resistance locus O) have proved to confer a durable resistance to powdery mildew in several species. Resistance granted by the MLO gene family members has prompted an increasing interest in characterizing these genes and implementing their use in plant breeding. Lentil (Lens culinaris Medik.) is a widely grown food legume almost exclusively consumed as dry seed with an average world production of 4.5 million tons. Powdery mildew causes severe losses on certain lentil cultivars under particular environmental conditions. Data mining of the lentil CDC Redberry draft genome allowed to identify up to 15 gene sequences with homology to known MLO genes, designated as LcMLOs. Further characterization of these gene sequences and their deduced protein sequences demonstrated conformity with key MLO protein characteristics such as the presence of transmembrane and calmodulin binding domains, as well as that of other conserved motifs. Phylogenetic and other comparative analyses revealed that LcMLO1 and LcMLO3 are the most likely gene orthologs related to powdery mildew response in other species, sharing a high similarity with other known resistance genes of dicot species, such as pea PsMLO1 and Medicago truncatula MtMLO1 and MtMLO3. Sets of primers were designed as tools to PCR amplify the genomic sequences of LcMLO1 and LcMLO3, also to screen lentil germplasm in search of resistance mutants. Primers were used to obtain the complete sequences of these two genes in all of the six wild lentil relatives. Respective to each gene, all Lens sequences shared a high similarity. Likewise, we used these primers to screen a working collection of 58 cultivated and 23 wild lentil accessions in search of length polymorphisms present in these two genes. All these data widen the insights on this gene family and can be useful for breeding programs in lentil and close related species.