Explore the vast range of titles available.

In contrast to the wealth of catalytic systems that are available to control the stereochemistry of thermally promoted cycloadditions, few similarly effective methods exist for the stereocontrol of photochemical cycloadditions. A major unsolved challenge in the design of enantioselective catalytic photocycloaddition reactions has been the difficulty of controlling racemic background reactions that occur by direct photoexcitation of substrates while unbound to catalyst. Here, we describe a strategy for eliminating the racemic background reaction in asymmetric [2 + 2] photocycloadditions of α,β-unsaturated ketones to the corresponding cyclobutanes by using a dual-catalyst system consisting of a visible light–absorbing transition-metal photocatalyst and a stereocontrolling Lewis acid cocatalyst. The independence of these two catalysts enables broader scope, greater stereochemical flexibility, and better efficiency than previously reported methods for enantioselective photochemical cycloadditions.

Terephthalic acid (PTA), a monomer in the synthesis of polyethylene terephthalate (PET), is obtained by the oxidation of petroleum-derived p-xylene. There is significant interest in the synthesis of renewable, biomass-derived PTA. Here, routes to PTA starting from oxidized products of 5-hydroxymethylfurfural (HMF) that can be produced from biomass are reported. These routes involve Diels-Alder reactions with ethylene and avoid the hydrogenation of HMF to 2,5-dimethylfuran. Oxidized derivatives of HMF are reacted with ethylene over solid Lewis acid catalysts that do not contain strong Brønsted acids to synthesize intermediates of PTA and its equally important diester, dimethyl terephthalate (DMT). The partially oxidized HMF, 5-(hydroxymethyl)furoic acid (HMFA), is reacted with high pressure ethylene over a pure-silica molecular sieve containing framework tin (Sn-Beta) to produce the Diels-Alder dehydration product, 4-(hydroxymethyl)benzoic acid (HMBA), with 31% selectivity at 61% HMFA conversion after 6 h at 190 °C. If HMFA is protected with methanol to form methyl 5-(methoxymethyl)furan-2-carboxylate (MMFC), MMFC can react with ethylene in the presence of Sn-Beta for 2 h to produce methyl 4-(methoxymethyl) benzenecarboxylate (MMBC) with 46% selectivity at 28% MMFC conversion or in the presence of a pure-silica molecular sieve containing framework zirconium (Zr-Beta) for 6 h to produce MMBC with 81% selectivity at 26% MMFC conversion. HMBA and MMBC can then be oxidized to produce PTA and DMT, respectively. When Lewis acid containing mesoporous silica (MCM-41) and amorphous silica, or Brønsted acid containing zeolites (Al-Beta), are used as catalysts, a significant decrease in selectivity/yield of the Diels-Alder dehydration product is observed.

New enzyme catalysts are usually engineered by repurposing the active sites of natural proteins. Here we show that design and directed evolution can be used to transform a non-natural, functionally naive zinc-binding protein into a highly active catalyst for an abiological hetero-Diels–Alder reaction. The artificial metalloenzyme achieves >104 turnovers per active site, exerts absolute control over reaction pathway and product stereochemistry, and displays a catalytic proficiency (1/KTS = 2.9 × 1010 M−1) that exceeds all previously characterized Diels–Alderases. These properties capitalize on effective Lewis acid catalysis, a chemical strategy for accelerating Diels–Alder reactions common in the laboratory but so far unknown in nature. Extension of this approach to other metal ions and other de novo scaffolds may propel the design field in exciting new directions.A de novo designed zinc-binding protein has been converted into a highly active, stereoselective catalyst for a hetero-Diels–Alder reaction. Design and directed evolution were used to effectively harness Lewis acid catalysis and create an enzyme more proficient than other reported Diels–Alderases.

Frequently referred to as the ‘magic methyl effect’, the installation of methyl groups—especially adjacent (α) to heteroatoms—has been shown to dramatically increase the potency of biologically active molecules 1 – 3 . However, existing methylation methods show limited scope and have not been demonstrated in complex settings 1 . Here we report a regioselective and chemoselective oxidative C( sp 3 )–H methylation method that is compatible with late-stage functionalization of drug scaffolds and natural products. This combines a highly site-selective and chemoselective C–H hydroxylation with a mild, functional-group-tolerant methylation. Using a small-molecule manganese catalyst, Mn(CF 3 PDP), at low loading (at a substrate/catalyst ratio of 200) affords targeted C–H hydroxylation on heterocyclic cores, while preserving electron-neutral and electron-rich aryls. Fluorine- or Lewis-acid-assisted formation of reactive iminium or oxonium intermediates enables the use of a mildly nucleophilic organoaluminium methylating reagent that preserves other electrophilic functionalities on the substrate. We show this late-stage C( sp 3 )–H methylation on 41 substrates housing 16 different medicinally important cores that include electron-rich aryls, heterocycles, carbonyls and amines. Eighteen pharmacologically relevant molecules with competing sites—including drugs (for example, tedizolid) and natural products—are methylated site-selectively at the most electron rich, least sterically hindered position. We demonstrate the syntheses of two magic methyl substrates—an inverse agonist for the nuclear receptor RORc and an antagonist of the sphingosine-1-phosphate receptor-1—via late-stage methylation from the drug or its advanced precursor. We also show a remote methylation of the B-ring carbocycle of an abiraterone analogue. The ability to methylate such complex molecules at late stages will reduce synthetic effort and thereby expedite broader exploration of the magic methyl effect in pursuit of new small-molecule therapeutics and chemical probes. A manganese-catalysed oxidative C( sp 3 )–H methylation method allows a methyl group to be selectively installed into medicinally important heterocycles, providing a way to improve pharmaceuticals and better understand the ‘magic methyl effect’.

Various Lewis acid–Lewis base interactions are discussed as initiating chemical reactions and processes. For example, the hydrogen bond is often a preliminary stage of the proton transfer process or the tetrel and pnicogen bonds lead sometimes to the SN2 reactions. There are numerous characteristics of interactions being first stages of reactions; one can observe a meaningful electron charge transfer from the Lewis base unit to the Lewis acid; such interactions possess at least partly covalent character, one can mention other features. The results of different methods and approaches that are applied in numerous studies to describe the character of interactions are presented here. These are, for example, the results of the Quantum Theory of Atoms in Molecules, of the decomposition of the energy of interaction or of the structure-correlation method.

Living systems provide a promising approach to chemical synthesis, having been optimized by evolution to convert renewable carbon sources, such as glucose, into an enormous range of small molecules. However, a large number of synthetic structures can still be difficult to obtain solely from cells, such as unsubstituted hydrocarbons. In this work, we demonstrate the use of a dual cellular–heterogeneous catalytic strategy to produce olefins from glucose using a selective hydrolase to generate an activated intermediate that is readily deoxygenated. Using a new family of iterative thiolase enzymes, we genetically engineered a microbial strain that produces 4.3 ± 0.4 g l−1 of fatty acid from glucose with 86% captured as 3-hydroxyoctanoic and 3-hydroxydecanoic acids. This 3-hydroxy substituent serves as a leaving group that enables heterogeneous tandem decarboxylation–dehydration routes to olefinic products on Lewis acidic catalysts without the additional redox input required for enzymatic or chemical deoxygenation of simple fatty acids.A dual cellular-then-heterogeneous catalysis strategy has been used to produce olefins from glucose. 3-Hydroxy acids are made using an engineered microbial host. A hydrolytic step then provides the driving force for fatty acid deoxygenation by simple heterogeneous Lewis acid catalysis. This decarboxylation–dehydration route to olefinic products avoids the need for an additional redox input typically required for deoxygenation of unmodified fatty acids.

Enantiopure vicinal amino alcohols and derivatives are essential structural motifs in natural products and pharmaceutically active molecules, and serve as main chiral sources in asymmetric synthesis. Currently known asymmetric catalytic protocols for this class of compounds are still rare and often suffer from limited scope of substrates, relatively low regio- or stereoselectivities, thus prompting the development of more effective methodologies. Herein we report a dual catalytic strategy for the convergent enantioselective synthesis of vicinal amino alcohols. The method features a radical-type Zimmerman–Traxler transition state formed from a rare earth metal with a nitrone and an aromatic ketyl radical in the presence of chiral N , N ′-dioxide ligands. In addition to high level of enantio- and diastereoselectivities, our synthetic protocol affords advantages of simple operation, mild conditions, high-yielding, and a broad scope of substrates. Furthermore, this protocol has been successfully applied to the concise synthesis of pharmaceutically valuable compounds (e.g., ephedrine and selegiline). Chiral vicinal amino alcohols are found in many bioactive compounds and may serve as chiral ligands. Here, the authors report a photocatalytic enantioselective cross-coupling of nitrones with aromatic aldehydes with a chiral ligand-coordinated rare earth ion synergistically producing enantiopure vicinal amino alcohols.

Two-coordinate boron cations (R 2 B + ), referred to as borinium ions, are chemical species in which the boron bears only four valence electrons, and that are isoelectronic with hypothetical carbon dications (R 2 C 2+ ). Although lone-pair-donating substituents such as amino groups have enabled the isolation of several borinium ions, diarylated and dialkylated borinium derivatives remain entirely unexplored. Here, we present the synthesis, structure and reactivity of the dimesitylborinium ion, which displays unexpectedly high thermal stability. X-ray crystallography and 11 B NMR spectroscopy, supported by density functional theory calculations, reveal that the borinium ion adopts a linear two-coordinate structure in both the solid state and in solution. The boron centre is stabilized by p π bonding from the mesityl groups and is free from coordination by the counterion or solvent molecules. This diarylborinium ion possesses exceptional Lewis acidity, accepting a pair of electrons from CO 2 to cause an unusual deoxygenation reaction. Borinium ions are two-coordinate boron cations that contain only four valence electrons on boron, and are difficult to isolate without electron donation from adjacent heteroatoms. Now, diarylborinium salts with no lone-pair donation from heteroatoms have been isolated, characterized and found to participate in an unusual reaction with CO 2 .

Biobased poly(γ-methyl-α-methylene-γ-butyrolactone) (PMMBL), an acrylic polymer bearing a cyclic lactone ring, has attracted increasing interest because it not only is biorenewable but also exhibits superior properties to petroleum-based linear analog poly(methyl methacrylate) (PMMA). However, such property enhancement has been limited to resistance to heat and solvent, and mechanically both types of polymers are equally brittle. Here we report the expeditious synthesis of well-defined PMMBL-based ABA tri-block copolymers (tri-BCPs)—enabled by dual-initiating and living frustrated Lewis pairs (FLPs)—which are thermoplastic elastomers showing much superior mechanical properties, especially at high working temperatures (80–130 °C), to those of PMMA-based tri-BCPs. The FLPs consist of a bulky organoaluminum Lewis acid and a series of newly designed bis(imino)phosphine superbases bridged by an alkyl linker, which promote living polymerization of MMBL. Uniquely, such bisphosphine superbases initiate the chain growth from both P-sites concurrently, enabling the accelerated synthesis of tri-BCPs in a one-pot, two-step procedure. The results from mechanistic studies, including the single crystal structure of the dually initiated active species, detailed polymerizations, and kinetic studies confirm the livingness of the polymerization and support the proposed polymerization mechanism featuring the dual initiation and subsequent chain growth from both P-sites of the superbase di-initiator. Biobased poly(γ-methyl-α-methylene-γ-butyrolactone) (PMMBL) has attracted interest because it is biorenewable and exhibits superior properties to petroleum-based linear analog poly(methyl methacrylate) (PMMA). Here the authors report the synthesis of well-defined PMMBL-based ABA tri-block copolymers, enabled by dual-initiating and living frustrated Lewis pairs, which have superior mechanical properties compared to those of PMMA-based tri-BCPs.

Low-valent late transition-metal catalysis has become indispensable to chemical synthesis, but homogeneous high-valent transition-metal catalysis is underdeveloped, mainly owing to the reactivity of high-valent transition-metal complexes and the challenges associated with synthesizing them. Here we report a carbon–carbon bond cleavage at ambient conditions by a Au( i ) complex that generates a stable Au( iii ) cationic complex. In contrast to the well-established soft and carbophilic Au( i ) catalyst, this Au( iii ) complex exhibits hard, oxophilic Lewis acidity. For example, we observed catalytic activation of α,β-unsaturated aldehydes towards selective conjugate additions as well as activation of an unsaturated aldehyde-allene for a [2 + 2] cycloaddition reaction. The origin of the regioselectivity and catalytic activity was elucidated by X-ray crystallographic analysis of an isolated Au( iii )-activated cinnamaldehyde intermediate. The concepts revealed suggest a strategy for accessing high-valent transition-metal catalysis from readily available precursors. The facile synthesis of a stable Au( III ) cationic complex is described; this gold catalyst exhibits hard, oxophilic Lewis acidity, enabling selective conjugate additions and a [2 + 2] cycloaddition reaction. A stable gold( III )-based catalyst High-valent transition metal catalysis is a potentially rich resource for synthetic chemists but is largely untapped due to the high reactivity of the complexes involved and the difficulty in synthesizing them. This study reports the development of a more easily prepared, stable and tunable gold( III ) catalyst that provides a strategy for accessing high-valent transition metal catalysis from readily available precursors. The authors use a mild carbon–carbon bond cleavage reaction by a Au( I ) complex to generate a stable Au( III ) cationic complex. This complex can activate α,β-unsaturated aldehydes towards selective conjugate additions and an unsaturated aldehyde–allene for a [2+2] cycloaddition reaction.