Explore the vast range of titles available.

Landfilling is one of the most common waste management methods employed in all countries alike, irrespective of their developmental status. The most commonly used types of landfills are (a) municipal solid waste landfill, (b) industrial waste landfill, and (c) hazardous waste landfill. There is, also, an emerging landfill type called “green waste landfill” that is, occasionally, being used. Most landfills, including those discussed in this review article, are controlled and engineered establishments, wherein the waste ought to abide with certain regulations regarding their quality and quantity. However, illegal and uncontrolled “landfills” (mostly known as open dumpsites) are, unfortunately, prevalent in many developing countries. Due to the widespread use of landfilling, even as of today, it is imperative to examine any environmental- and/or health-related issues that have emerged. The present study seeks to determine the environmental pollution and health effects associated with waste landfilling by adopting a desk review design. It is revealed that landfilling is associated with various environmental pollution problems, namely, (a) underground water pollution due to the leaching of organic, inorganic, and various other substances of concern (SoC) contained in the waste, (b) air pollution due to suspension of particles, (c) odor pollution from the deposition of municipal solid waste (MSW), and (d) even marine pollution from any potential run-offs. Furthermore, health impacts may occur through the pollution of the underground water and the emissions of gases, leading to carcinogenic and non-carcinogenic effects of the exposed population living in their vicinity. Graphical abstract: [Figure not available: see fulltext.]

Research on the distribution and effects of particulate plastic has intensified in recent years and yet, due to analytical challenges, our understanding of nanoplastic occurrence and behaviour has remained comparatively elusive. However, process studies could greatly aid in defining key parameters for nanoplastic interactions within and transfers between technical and environmental compartments. Here we provide a method to synthesize nanoplastic particles doped with a chemically entrapped metal used as a tracer, which provides a robust way to detect nanoplastics more easily, accurately and quantitatively in complex media. We show the utility of this approach in batch studies that simulate the activated sludge process of a municipal waste water treatment plant and so better understand the fate of nanoplastics in urban environments. We found that the majority of particles were associated with the sludge (>98%), with an average recovery of over 93% of the spiked material achieved. We believe that this approach can be developed further to study the fate, transport, mechanistic behaviour and biological uptake of nanoplastics in a variety of systems on different scales.Analytical challenges in detecting nanoplastics have hindered the understanding of their behaviour in environmental systems, but these difficulties can be circumvented by synthesizing metal-doped nanoplastics (where the metal can be measured as a proxy for the plastic) to undertake mechanistic investigations of particle fate, transport and biological interactions in lab and pilot-scale studies.

Microbial communities in wastewater treatment plants (WWTPs) play a key role in water purification. Microbial communities of activated sludge (AS) vary extensively based on plant operating technology, influent characteristics and WWTP capacity. In this study we performed 16S rRNA gene profiling of AS at nine large-scale WWTPs responsible for the treatment of municipal sewage from the city of Moscow, Russia. Two plants employed conventional aerobic process, one plant—nitrification/denitrification technology, and six plants were operated with the University of Cape Town (UCT) anaerobic/anoxic/oxic process. Microbial communities were impacted by the technology and dominated by the Proteobacteria , Bacteroidota and Actinobacteriota . WWTPs employing the UCT process enabled efficient removal of not only organic matter, but also nitrogen and phosphorus, consistently with the high content of ammonia-oxidizing Nitrosomonas sp. and phosphate-accumulating bacteria. The latter group was represented by Candidatus Accumulibacter, Tetrasphaera sp. and denitrifiers. Co-occurrence network analysis provided information on key hub microorganisms in AS, which may be targeted for manipulating the AS stability and performance. Comparison of AS communities from WWTPs in Moscow and worldwide revealed that Moscow samples clustered together indicating that influent characteristics, related to social, cultural and environmental factors, could be more important than a plant operating technology.

In the last few decades, environmental contaminants (ECs) have been introduced into the environment at an alarming rate. There is a risk to human health and aquatic ecosystems from trace levels of emerging contaminants, including hospital wastewater (HPWW), cosmetics, personal care products, endocrine system disruptors, and their transformation products. Despite the fact that these pollutants have been introduced or detected relatively recently, information about their characteristics, actions, and impacts is limited, as are the technologies to eliminate them efficiently. A wastewater recycling system is capable of providing irrigation water for crops and municipal sewage treatment, so removing ECs before wastewater reuse is essential. Water treatment processes containing advanced ions of biotic origin and ECs of biotic origin are highly recommended for contaminants. This study introduces the fundamentals of the treatment of tertiary wastewater, including membranes, filtration, UV (ultraviolet) irradiation, ozonation, chlorination, advanced oxidation processes, activated carbon (AC), and algae. Next, a detailed description of recent developments and innovations in each component of the emerging contaminant removal process is provided.

Landfill leachate has been documented as a significant source of trace organic pollutants, comprising an expansive family of per- and polyfluoroalkyl substances (PFAS). This study presents the findings on the distribution of 13 perfluoroalkyl carboxylates (PFCAs) and 4 perfluoroalkyl sulfonates (PFSAs) in leachates from 6 municipal solid waste (MSW) landfills in western China. The total concentrations of 17 PFAS in sampled leachates ranged from 1805 to 43,310 ng/L, and 15 compounds were detected in all samples. The short-chain compounds perfluorobutane sulfonate (PFBS, mean mass fraction 23.1%) and perfluorobutyric acid (PFBA, mean mass fraction 20.6%) were dominant. There were higher PFAS concentrations in leachates from operating landfills (mean: 12,194 ng/L) compared to closed landfills (mean: 2747 ng/L), but there was no significant difference between young (< 10 years) and old landfills (> 10 years). Moderate to weak correlations were observed between PFAS concentrations and leachate properties, e.g., TN, NH 4 + -N, TOC, and pH. This is the first report on the distribution of PFAS in landfill leachates from western China. The results have identified landfill leachate as an underestimated source of PFAS in the environment and have contributed to a more comprehensive evaluation on PFAS presence across China. Graphical abstract

Increased population growth and rapid urbanization have resulted in the generation of large quantities of solid waste across major urban cities in Ghana, outstripping local authorities’ ability to manage and dispose of waste in a sanitary manner. This study explored the perspectives and experiences of municipal waste company managers and supervisors in the Ho municipality of Ghana on solid waste management practices. A qualitative inquiry was conducted by adopting a phenomenological approach, using in-depth interviews and focus group discussions for data collection. A total of 35 participants, made up of 12 managers and 23 supervisors took part in the study. Transcribed data were imported into NVivo 11.0 software for coding. Content analysis was applied to analyze all transcribed data using processes of induction and deduction. The results showed that organizational capacity, resources, and expertise; community factors such as socio-cultural beliefs and a low sense of responsibility towards solid waste management among urban residents; contextual factors such as regulations, and weak enforcement all influence and shape the level of efficiency and effectiveness of solid waste management practices in the study setting. The findings suggest that policy frameworks and procedures implemented to curb poor urban waste management practices should be systematic and thorough in order to tackle the issue of solid waste in the study setting and Ghana in general. The nature of the identified issues and challenges requires multidimensional and multilevel interventions to provide sustainable solutions for managing urban waste in Ghana.

This study compared the populations of antimicrobial-resistant bacteria and the repertoire of antimicrobial resistance genes in four environments: effluent of three municipal waste water treatment facilities, three cattle feedlot runoff catchment ponds, three swine waste lagoons, and two \"low impact\" environments (a municipal lake and a relict prairie). Multiple liquid and solid samples were collected from each environment. The prevalences and concentrations of antimicrobial-resistant (AMR) Gram-negative (Escherichia coli and Salmonella enterica) and Salmonella prevalences of 83 antimicrobial resistance genes in metagenomic DNA isolated from samples pooled (n= 44) by collection date, location, and sample type were determined. The prevalences and concentrations of AMR E. coli and S. Salmonella were similar among the livestock and municipal sample sources. The levels of erythromycin-resistant enterococci were significantly higher in cattle runoff and swine waste lagoon liquid samples compared to municipal samples, but not significantly different in solid samples. Similarly, trimethoprim/sulfamethoxazole-resistant E. coli concentrations were significantly higher in swine liquid than in municipal liquid samples, but there was no difference in solid samples. Individual antimicrobial resistance genes were significantly clustered within livestock, low impact, and municipal samples, with municipal samples harboring the highest number of antimicrobial resistance genes. The numbers of class A beta-lactamase, class C beta-lactamase, and fluoroquinolone resistance genes detected were significantly higher (P < 0.05) in municipal samples than in cattle runoff or swine lagoon samples. In conclusion, we report that AMR is a very widespread phenomenon and that similar prevalences and concentrations of antimicrobial-resistant bacteria (ARB) and antimicrobial resistance genes exist in cattle, human, and swine waste streams, but a higher diversity of antimicrobial resistance genes are present in human waste streams.

Municipal solid waste (MSW) represents an inevitable by-product of human activity and a major crisis for communities across the globe. In recent times, the recycling of MSW has drawn attention as the process can add value through resources from the recovered waste materials and facilitates the process of circular economy. However, during the unprecedented coronavirus (COVID-19) outbreak, the risk of infection with the highly contagious virus has proven detrimental to the continuation of MSW as a valuable resource. The volume of waste, especially household waste, is higher; face masks, PPE (personal protective equipment), and hazardous materials such as batteries and empty chlorine bottles are examples of extra waste that have arisen during the pandemic. Various countries have set up initiatives for MSW management, including safety measurements for employees in the MSW management sector. The use of disinfectant prior to sorting waste, as well as storing waste for 9 days, may help to inactivate the COVID-19 virus, ensuring an appropriate safety level for MSW management. This work aimed at studying different MSW management strategies, specific challenges, and possible solutions for better understanding for those involved in waste management, in addition to providing a possible management strategy during and post-COVID-19 pandemic. Graphical abstract

The composition of municipal wastewater and sewage sludge reflects the use and proliferation of elements and contaminants within society. In Sweden, official statistics show that concentrations of toxic metals in municipal sewage sludge have steadily decreased, by up to 90 %, since the 1970s, due to environmental programmes and statutory limits on metals in sludge and soil. Results from long-term field experiments show that reduced metal pollution during repeated sewage sludge application has reversed negative trends in soil biology. Despite this Swedish success story, organic waste recycling from Swedish towns and cities to arable land is still limited to only about 20 % of the total amount produced. Resistance among industries and consumers to products grown on land treated with sewage sludge may not always be scientifically grounded; however, there are rational obstacles to application of sewage sludge to land based on its inherent properties rather than its content of pollutants. We argue that application of urban organic wastes to soil is an efficient form of recycling for small municipalities, but that organic waste treatment from large cities requires other solutions. The large volumes of sewage sludge collected in towns and cities are not equitably distributed back to arable land because of the following: (i) The high water and low nutrient content in sewage sludge make long-distance transportation too expensive; and (ii) the low plant availability of nutrients in sewage sludge results in small yield increases even after many years of repeated sludge addition. Therefore, nutrient extraction from urban wastes instead of direct organic waste recycling is a possible way forward. The trend for increased combustion of urban wastes will make ash a key waste type in future. Combustion not only concentrates the nutrients in the ash but also leads to metal enrichment; hence, direct application of the ash to land is most often not possible. However, inorganic fertiliser (e.g. mono-ammonium phosphate fertiliser, MAP) can be produced from metalcontaminated sewage sludge ash in a process whereby the metals are removed. We argue that the view on organic waste recycling needs to be diversified in order to improve the urban-rural nutrient cycle, since only recycling urban organic wastes directly is not a viable option to close the urban-rural nutrient cycle. Recovery and recycling of nutrients from organic wastes are a possible solution. When organic waste recycling is complemented by nutrient extraction, some nutrient loops within society can be closed, enabling more sustainable agricultural production in future.

Water scarcity and accessibility remain persistently amongst the most prominent global challenges. Although there is a wide agreement among international organizations that Integrated Water Resources Management (IWRM) and water governance are key to overcome water-related challenges, global assessments of the progress made by cities is lacking. This paper for the first time analyses the challenges of water, wastewater, municipal solid waste and climate change in cities. We used empirical studies (125 cities) based on the City Blueprint Approach and developed a statistical estimation model to estimate IWRM performances of another 75 cities. These 200 cities in total represent more than 95% of the global urban population. This comprehensive global picture enables us to evaluate the existing gaps in achieving water-related Sustainable Development Goals (SDGs), in particular SDG 6 (clean water and sanitation) and SDG 11 (sustainable cities and communities). The best performing cities were Amsterdam and Singapore. Unfortunately, most cities do not yet manage their water resources wisely and are far from achieving the SDGs. For instance, targets regarding drinking water supply are still a challenge for many cities in Africa and Asia and challenges regarding sanitation are high in cities in Africa, Asia and Latin America. The same holds for solid waste management, climate adaptation, and people living in informal settlements. In another paper we will address the solution pathways to these global challenges.