Explore the vast range of titles available.

Dental amalgam is an alloy consisting of a mixture of fine metallic powder of silver, tin, zinc, copper, and a trace amount of palladium in combination with about fifty percent elemental mercury that forms a matrix phase. Dental amalgams consisting of a high-copper content are the most common types of alloys currently utilized for the restoration of decayed, broken, and fractured posterior human teeth. The present research objective was primarily to improve the material properties by determining and analyzing the amount of mercury vapor released from dental amalgam received from eight different commercial brands. The mechanical hardness of the alloys was found to increase with an increase in copper content in the amalgam. The effect of copper addition on material aging was also studied. During the release of mercury vapor, the corresponding energies associated with the release of mercury vapor from each sample were determined for each successive measurement. The results indicated that increasing the copper content of the amalgam counters the release of mercury vapor from posterior teeth and improves the hardness properties.

Dental amalgams have been used by dentists for the restoration of posterior human teeth. However, there have been concerns about the release of mercury from amalgams into the oral cavity. The objective of the present research is to study the effect of titanium (Ti) nanoparticles on the microstructural mechanism of the release of mercury vapor in two commonly used brands of dental amalgam (the Dispersalloy: 11.8% Cu; the Sybralloy: 33% Cu). Ti powder was added to both the Dispersalloy and the Sybralloy in increments of 10 mg up to 80 mg. The addition of Ti powder to both brands of dental amalgam has been found to result in a considerable decrease in Hg vapor release. The decrease in the Hg vapor release due to Ti addition has been explained by the formation of strong Hg–Ti covalent bonds, which reduce the availability of Hg atoms for evaporation. The Ti atoms in excess of the solubility limit of Ti in Hg reside in the grain boundaries, which also reduces the evaporation of Hg from the amalgam. The binding of Hg with Ti via a strong covalent bond also results in a significant improvement in mechanical properties such as Vickers hardness.

A chemiresistor sensor for ultra-low levels of elemental mercury (Hg 0 ) vapor is described. The sensor was prepared through thermal reduction of graphene oxide (GO) deposited on an interdigitated electrode using only low temperature annealing typically at 230 °C. The sensor responds to the presence of Hg 0 vapor within <1 min and spontaneously recovers its baseline through flushing with a Hg 0 -free carrier gas. The sensor has a linear response in the range of 0.5 to 12.2 ppb v of Hg 0 vapor and a detection limit of 0.10 ppb v . The amount of GO and annealing temperature affect the sensor response and were optimized. The sensor can find use in monitoring exposure of persons to Hg 0 vapors, for which a threshold value of 6.1 ppb v has been set by the World Health Organization. Graphical abstract Schematic of an interdigitated electrode modified with a layer of thermally reduced graphene oxide. It can be used as a chemiresistive sensor for Hg 0 vapor. The sensor displays a rapid and reversible response and has an ultralow detection limit of 0.10 ppb v .

The goal of this project was to create and optimize the performance of portable chambers for reliable ultraviolet (UV) disinfection of personal protective equipment (PPE) and enable its safe reuse. During unforeseen times of high demand for PPE, such as during the coronavirus disease 2019 (COVID-19) pandemic, caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), single-use PPE supply can be quickly depleted. UV radiation has been shown to disinfect materials with high efficacy. This paper reports the design and construction of two 280 nm ultraviolet-C (UV-C) disinfection chambers in the form of portable chambers with 46 cm × 46 cm × 46 cm interior dimensions, one using light-emitting diodes and the other using mercury vapor lamps. This paper summarizes and presents a review of SARS-CoV-2 UV deactivation research during 2020 to 2021. Additionally, this paper discusses efforts to increase the uniformity and overall intensity of the UV-C radiation within the chambers through the installation of a UV-reflective, porous polytetrafluoroethylene (PTFE) material. A calculator prototype was additionally designed to calculate the reduction of SARS-CoV-2 as a result of UV-C disinfection, and the prototype code is presented. The paper describes the selection of UV-C radiation sources for the chambers and the chambers’ mechanical and electrical design, PTFE installation, testing, and safety considerations.

The possibility of increasing the sensitivity of the mercury vapor analyzer in ambient air using a capillary lamp with a natural mercury isotopic mixture in the presence of the transverse Zeeman effect as a radiation source has been experimentally studied. Lamp radiation is stabilized by separate control of temperatures of the capillary and lamp bulb. The obtained sensitivity of the analyzer reached 14 ng/m 3 during more than 40 min.

Developing efficient and sustainable carbon sorbent for mercury vapor (Hg 0 ) capture is significant to public health and ecosystem protection. Here we show a carbon material, namely graphdiyne with accessible sp -hybridized carbons (HsGDY), that can serve as an effective “trap” to anchor Hg atoms by strong electron-metal-support interaction, leading to the in-situ adsorption-coupled-oxidation of Hg. The adsorption process is benefited from the large hexagonal pore structure of HsGDY. The oxidation process is driven by the surface charge heterogeneity of HsGDY which can itself induce the adsorbed Hg atoms to lose electrons and present a partially oxidized state. Its good adaptability and excellent regeneration performance greatly broaden the applicability of HsGDY in diverse scenarios such as flue gas treatment and mercury-related personal protection. Our work demonstrates a sp -hybridized carbon material for mercury vapor capture which could contribute to sustainability of mercury pollution industries and provide guide for functional carbon material design. Developing efficient carbon sorbent for mercury vapor capture is significant to public health. Here authors show a carbon material, namely graphdiyne with accessible sp-hybridized carbons, that can serve as a “trap” to anchor Hg atoms, leading to the in-situ adsorption-coupled-oxidation of Hg.

This review covers the toxicology of mercury and its compounds. Special attention is paid to those forms of mercury of current public health concern. Human exposure to the vapor of metallic mercury dates back to antiquity but continues today in occupational settings and from dental amalgam. Health risks from methylmercury in edible tissues of fish have been the subject of several large epidemiological investigations and continue to be the subject of intense debate. Ethylmercury in the form of a preservative, thimerosal, added to certain vaccines, is the most recent form of mercury that has become a public health concern. The review leads to general discussion of evolutionary aspects of mercury, protective and toxic mechanisms, and ends on a note that mercury is still an \"element of mystery.\"

Neurodegenerative diseases such as Alzheimer’s disease, Parkinson’s disease, amyotrophic lateral sclerosis, and multiple sclerosis are characterized by a chronic and selective process of neuronal cell death. Although the causes of neurodegenerative diseases remain still unknown, it is now a well-established idea that more factors, such as genetic, endogenous, and environmental, are involved. Among environmental causes, the accumulation of mercury, a heavy metal considered a toxic agent, was largely studied as a probable factor involved in neurodegenerative disease course. Mercury exists in three main forms: elemental mercury, inorganic mercury, and organic mercury (methylmercury and ethylmercury). Sources of elemental mercury can be natural (volcanic emission) or anthropogenic (coal-fired electric utilities, waste combustion, hazardous-waste incinerators, and gold extraction). Moreover, mercury is still used as an antiseptic, as a medical preservative, and as a fungicide. Dental amalgam can emit mercury vapor. Mercury vapor, being highly volatile and lipid soluble, can cross the blood-brain barrier and the lipid cell membranes and can be accumulated into the cells in its inorganic forms. Also, methylmercury can pass through blood-brain and placental barriers, causing serious damage in the central nervous system. This review describes the toxic effects of mercury in cell cultures, in animal models, and in patients with neurodegenerative diseases. In vitro experiments showed that mercury exposure was principally involved in oxidative stress and apoptotic processes. Moreover, motor and cognitive impairment and neural loss have been confirmed in various studies performed in animal models. Finally, observational studies on patients with neurodegenerative diseases showed discordant data about a possible mercury involvement.

The exposure to arsenic and mercury in various insect trophic guilds from two mercury mining sites in Mexico was assessed. The two study sites were La Laja (LL) and La Soledad (LS) mines. Additionally, a reference site (LSR) was evaluated for LS. The terrestrial ecosystem was studied at LL, whereas both the terrestrial ecosystem and a stream called El Cedral (EC) were assessed at LS. The study sites are situated in the Biosphere Reserve Sierra Gorda (BRSG). Mercury vapor concentrations were measured with a portable analyzer, and concentrations of arsenic and mercury in environmental and biological samples were determined through atomic absorption spectrophotometry. Both pollutants were detected in all terrestrial ecosystem components (soil, air, leaves, flowers, and insects) from the two mines. The insect trophic guilds exposed included pollinivores, rhizophages, predators, coprophages, and necrophages. In LS, insects accumulated arsenic at levels 29 to 80 times higher than those found in specimens from LSR, and 10 to 46 times higher than those from LL. Similarly, mercury exposure in LS was 13 to 62 times higher than LSR, and 15 to 54 times higher than in LL. The analysis of insect exposure routes indicated potential exposure through air, soil, leaves, flowers, animal prey, carrion, and excrement. Water and sediment from EC exhibited high levels of arsenic and mercury compared to reference values, and predatory aquatic insects were exposed to both pollutants. In conclusion, insects from mercury mining sites in the BRSG are at risk.

The Dumarey equation has been the dominant relationship used to calculate the mass concentration of saturated elemental mercury vapour in air for the calibration of mercury vapour measurement equipment for over 25 years. However, the origin of the equation, and the validation data supporting its accuracy have never been published. This paper addresses that deficiency, compares the Dumarey equation with other data sets to which it has been wrongly attributed in the past, and describes why it remains superior to the use of mercury vapour pressure data in combination with the ideal gas law, for the purposes of calibrating mercury vapour measurement equipment.