Explore the vast range of titles available.

Non-alcoholic fatty liver disease (NAFLD) and non-alcoholic steatohepatitis (NASH) are associated with obesity. They are accompanied by increased levels of free cholesterol in the liver. Most free cholesterol resides within the plasma membrane. We assessed the impact of adding or removing free cholesterol on the function and localization of two hepatocellular uptake transporters: the Na+/taurocholate cotransporting polypeptide (NTCP) and the organic cation transporter 1 (OCT1). We used a cholesterol–MCD complex (cholesterol) to add cholesterol and methyl-β-cyclodextrin (MCD) to remove cholesterol. Our results demonstrate that adding cholesterol decreases NTCP capacity from 132 ± 20 to 69 ± 37 µL/mg/min and OCT1 capacity from 209 ± 66 to 125 ± 26 µL/mg/min. Removing cholesterol increased NTCP and OCT1 capacity to 224 ± 65 and 279 ± 20 µL/mg/min, respectively. In addition, adding cholesterol increased the localization of NTCP within lipid rafts, while adding or removing cholesterol increased OCT1 localization in lipid rafts. These results demonstrate that increased cholesterol levels can impair NTCP and OCT1 function, suggesting that the free cholesterol content of the liver can alter bile acid and drug uptake into the liver. This could explain the increased plasma bile acid levels in NAFLD and NASH patients and potentially lead to altered drug disposition.

Background Intracellular hemoglobin polymerization has been supposed to be the major determinant for the elevated rigidity/stiffness of sickle erythrocytes from sickle cell anemia (SCA) patients. However, the contribution of the cell envelope remains unclear. Results In this study, using atomic force microscopy (AFM), we compared the normal and sickled erythrocyte surfaces for stiffness and topography. AFM detected that sickle cells had a rougher surface and were stiffer than normal erythrocytes and that sickle cell ghosts had a rougher surface (for both outer and inner surfaces) and were thicker than normal ghosts, the latter implying a higher membrane-associated hemoglobin content/layer in the sickle cell envelope. Compared to healthy subjects, the SCA patients had lower plasma lipoprotein levels. AFM further revealed that a mild concentration of methyl-β-cyclodextrin (MβCD, a putative cholesterol-depleting reagent) could induce an increase in roughness of erythrocytes/ghosts and a decrease in thickness of ghosts for both normal and sickle cells, implying that MβCD can alter the cell envelope from outside (cholesterol in the plasma membrane) to inside (membrane-associated hemoglobin). More importantly, MβCD also caused a more significant decrease in stiffness of sickle cells than that of normal erythrocytes. Conclusions The data reveal that besides the cytosolic hemoglobin fibers, the cell envelope containing the membrane-associated hemoglobin also is involved in the biomechanical properties (e.g., stiffness and shape maintenance) of sickle erythrocytes.

Supramolecular glass is a non-covalently cross-linked amorphous material that exhibits excellent optical properties and unique intrinsic structural features. Compared with artificial inorganic/organic glass, which has been extensively developed, supramolecular glass is still in the infancy stage, and itself is rarely recognized and studied thus far. Herein, we present the development of the host–guest molecular recognition motifs between methyl-β-cyclodextrin and para -hydroxybenzoic acid as the building blocks of supramolecular glass. Non-covalent polymerization resulting from the host–guest complexation and hydrogen bonding formation enables high transparency and bulk state to supramolecular glass. Various advantages, including recyclability, compatibility, and thermal processability, are associated with dynamic assembly pattern. Short-range order (host–guest complexation) and long-range disorder (three dimensional polymeric network) structures are identified simultaneously, thus demonstrating the typical structural characteristics of glass. This work provides a supramolecular strategy for constructing transparent materials from organic components. Strategies to produce supramolecular glass and the study of its intrinsic structure and mechanical properties remains largely unexplored. Here, the authors prepare a supramolecular glass via the host–guest recognition between methyl-β-cyclodextrin and para -hydroxybenzoic acid with recyclability, compatibility, and thermal processability.

The transient receptor potential vanilloid 2 (TRPV2) ion channel is a polymodal receptor widely involved in many physiological and pathological processes. Despite many TRPV2 modulators being identified, whether and how TRPV2 is regulated by endogenous lipids remains elusive. Here, we report an endogenous cholesterol molecule inside the vanilloid binding pocket (VBP) of TRPV2, with a ‘head down, tail up’ configuration, resolved at 3.2 Å using cryo-EM. Cholesterol binding antagonizes ligand activation of TRPV2, which is removed from VBP by methyl-β-cyclodextrin (MβCD) as resolved at 2.9 Å. We also observed that estradiol (E2) potentiated TRPV2 activation by 2-aminoethoxydiphenyl borate (2-APB), a classic tool compound for TRP channels. Our cryo-EM structures (resolved at 2.8–3.3 Å) further suggest how E2 disturbed cholesterol binding and how 2-APB bound within the VBP with E2 or without both E2 and endogenous cholesterol, respectively. Therefore, our study has established the structural basis for ligand recognition of the inhibitory endogenous cholesterol and excitatory exogenous 2-APB in TRPV2. Cryo-EM structures of the mouse TRPV2 channel, combined with electrophysiology and simulations, reveal that endogenous cholesterol binds to the vanilloid binding pocket to inhibit this channel, while exogenous 2-APB binds to same pocket to open TRPV2.

Freely suspended liposomes are widely used as model membranes for studying lipid–lipid and protein–lipid interactions. Liposomes prepared by conventional methods have chemically identical bilayer leaflets. By contrast, living cells actively maintain different lipid compositions in the two leaflets of the plasma membrane, resulting in asymmetric membrane properties that are critical for normal cell function. Here, we present a protocol for the preparation of unilamellar asymmetric phospholipid vesicles that better mimic biological membranes. Asymmetry is generated by methyl-β-cyclodextrin-catalyzed exchange of the outer leaflet lipids between vesicle pools of differing lipid composition. Lipid destined for the outer leaflet of the asymmetric vesicles is provided by heavy-donor multilamellar vesicles containing a dense sucrose core. Donor lipid is exchanged into extruded unilamellar acceptor vesicles that lack the sucrose core, facilitating the post-exchange separation of the donor and acceptor pools by centrifugation because of differences in vesicle size and density. We present two complementary assays allowing quantification of each leaflet’s lipid composition: the overall lipid composition is determined by gas chromatography–mass spectrometry, whereas the lipid distribution between the two leaflets is determined by NMR, using the lanthanide shift reagent Pr3+. The preparation protocol and the chromatographic assay can be applied to any type of phospholipid bilayer, whereas the NMR assay is specific to lipids with choline-containing headgroups, such as phosphatidylcholine and sphingomyelin. In ~12 h, the protocol can produce a large yield of asymmetric vesicles (up to 20 mg) suitable for a wide range of biophysical studies.

Lysosomal exocytosis is involved in many key cellular processes but its spatiotemporal regulation is poorly known. Using total internal reflection fluorescence microscopy (TIRFM) and spatial statistics, we observed that lysosomal exocytosis is not random at the adhesive part of the plasma membrane of RPE1 cells but clustered at different scales. Although the rate of exocytosis is regulated by the actin cytoskeleton, neither interfering with actin or microtubule dynamics by drug treatments alters its spatial organization. Exocytosis events partially co-appear at focal adhesions (FAs) and their clustering is reduced upon removal of FAs. Changes in membrane tension following a hypo-osmotic shock or treatment with methyl-β-cyclodextrin were found to increase clustering. To investigate the link between FAs and membrane tension, cells were cultured on adhesive ring-shaped micropatterns, which allow to control the spatial organization of FAs. By using a combination of TIRFM and fluorescence lifetime imaging microscopy (FLIM), we revealed the existence of a radial gradient in membrane tension. By changing the diameter of micropatterned substrates, we further showed that this gradient as well as the extent of exocytosis clustering can be controlled. Together, our data indicate that the spatial clustering of lysosomal exocytosis relies on membrane tension patterning controlled by the spatial organization of FAs.

Paclitaxel as a microtubule-stabilizing agent is widely used for the treatment of a vast range of cancers. Corylus avellana cell suspension culture (CSC) is a promising strategy for paclitaxel production. Elicitation of paclitaxel biosynthesis pathway is a key approach for improving its production in cell culture. However, optimization of this process is time-consuming and costly. Modeling of paclitaxel elicitation process can be helpful to predict the optimal condition for its high production in cell culture. The objective of this study was modeling and forecasting paclitaxel biosynthesis in C. avellana cell culture responding cell extract (CE), culture filtrate (CF) and cell wall (CW) derived from endophytic fungus, either individually or combined treatment with methyl-[beta]-cyclodextrin (MBCD), based on four input variables including concentration levels of fungal elicitors and MBCD, elicitor adding day and CSC harvesting time, using adaptive neuro-fuzzy inference system (ANFIS) and multiple regression methods. The results displayed a higher accuracy of ANFIS models (0.94-0.97) as compared to regression models (0.16-0.54). The great accordance between the predicted and observed values of paclitaxel biosynthesis for both training and testing subsets support excellent performance of developed ANFIS models. Optimization process of developed ANFIS models with genetic algorithm (GA) showed that optimal MBCD (47.65 mM) and CW (2.77% (v/v)) concentration levels, elicitor adding day (16) and CSC harvesting time (139 h and 41 min after elicitation) can lead to highest paclitaxel biosynthesis (427.92 [mu]g l.sup.-1). The validation experiment showed that ANFIS-GA method can be a promising tool for selecting the optimal conditions for maximum paclitaxel biosynthesis, as a case study.

Simultaneous poisoning by carbon monoxide (CO) and hydrogen cyanide is the major cause of mortality in fire gas accidents. Here, we report on the invention of an injectable antidote against CO and cyanide (CN⁻) mixed poisoning. The solution contains four compounds: iron(III)porphyrin (FeIIITPPS, F), two methyl-β-cyclodextrin (CD) dimers linked by pyridine (Py3CD, P) and imidazole (Im3CD, I), and a reducing agent (Na₂S₂O₄, S). When these compounds are dissolved in saline, the solution contains two synthetic heme models including a complex of F with P (hemoCD-P) and another one of F with I (hemoCD-I), both in their iron(II) state. hemoCD-P is stable in its iron(II) state and captures CO more strongly than native hemoproteins, while hemoCD-I is readily autoxidized to its iron(III) state to scavenge CN⁻ once injected into blood circulation. The mixed solution (hemoCD-Twins) exhibited remarkable protective effects against acute CO and CN⁻ mixed poisoning in mice (~85% survival vs. 0% controls). In a model using rats, exposure to CO and CN⁻ resulted in a significant decrease in heart rate and blood pressure, which were restored by hemoCD-Twins in association with decreased CO and CN⁻ levels in blood. Pharmacokinetic data revealed a fast urinary excretion of hemoCD-Twins with an elimination half-life of 47 min. Finally, to simulate a fire accident and translate our findings to a real-life scenario, we confirmed that combustion gas from acrylic cloth caused severe toxicity to mice and that injection of hemoCD-Twins significantly improved the survival rate, leading to a rapid recovery from the physical incapacitation.

Focal adhesion (FA) assembly, mediated by integrin activation, responds to matrix stiffness; however, the underlying mechanisms are unclear. Here, we showed that β1 integrin and caveolin-1 (Cav1) levels were decreased with declining matrix stiffness. Soft matrix selectively downregulated β1 integrin by endocytosis and subsequent lysosomal degradation. Disruption of lipid rafts with methyl-β-cyclodextrin or nystatin, or knockdown of Cav1 by siRNA decreased cell spreading, FA assembly, and β1 integrin protein levels in cells cultured on stiff matrix. Overexpression of Cav1, particularly the phospho-mimetic mutant Cav1-Y14D, averted soft matrix-induced decreases in β1 integrin protein levels, cell spreading, and FA assembly in NMuMG cells. Interestingly, overexpression of an auto-clustering β1 integrin hindered soft matrix-induced reduction of Cav1 and cell spreading, which suggests a reciprocal regulation between β1 integrin and Cav1. Finally, co-expression of this auto-clustering β1 integrin and Cav1-Y14D synergistically enhanced cell spreading, and FA assembly in HEK293T cells cultured on either stiff ( > G Pa) or soft (0.2 kPa) matrices. Collectively, these results suggest that matrix stiffness governs the expression of β1 integrin and Cav1, which reciprocally control each other, and subsequently determine FA assembly and turnover.

Sericin is a protein extracted from Bombyx mori silk cocoons. Over the last decade, this wastewater product of the textile industry has shown many interesting biological properties. This protein is widely used in the cosmetic and biomedical fields. In this study, sericin has been obtained via a High–Temperature High–Pressure degumming process, and was dried using the freeze–drying (fd) and spray–drying (sd) techniques. Proteins tend to collapse during drying, hence, sericin has been dried in the presence of two selected carrier agents: methyl–β–cyclodextrin and trehalose. The obtained powders have been analyzed using thermal investigation, microscopy (optical, SEM), and granulometric and spectroscopic analyses. Moreover, the percentage yield of the spray–drying process has been calculated. Both the agents were able to significantly improve the drying process, without altering the physico–chemical properties of the protein. In particular, the co–spray–drying of sericin with methyl–β–cyclodextrin and trehalose gave good process yields and furnished a powder with low moisture content and handling properties that are better than those of the other studied dried products. These characteristics seem to be appropriate and fruitful for the manufacturing of cosmetic raw materials.