Explore the vast range of titles available.

Angular momentum division has emerged as a physically orthogonal multiplexing method in high-capacity optical information technologies. However, the typical bulky elements used for information retrieval from the overall diffracted field, based on the interference method, impose a fundamental limit toward realizing on-chip multiplexing. We demonstrate noninterference angular momentum multiplexing by using a mode-sorting nanoring aperture with a chip-scale footprint as small as 4.2 micrometers by 4.2 micrometers, where nanoring slits exhibit a distinctive outcoupling efficiency on tightly confined plasmonic modes. The nonresonant mode-sorting sensitivity and scalability of our approach enable on-chip parallel multiplexing over a bandwidth of 150 nanometers in the visible wavelength range. The results offer the possibility of ultrahigh-capacity and miniaturized nanophotonic devices harnessing angular momentum division.

Multimode silicon photonics is attracting more and more attention because the introduction of higher-order modes makes it possible to increase the channel number for data transmission in mode-division-multiplexed (MDM) systems as well as improve the flexibility of device designs. On the other hand, the design of multimode silicon photonic devices becomes very different compared with the traditional case with the fundamental mode only. Since not only the fundamental mode but also the higher-order modes are involved, one of the most important things for multimode silicon photonics is the realization of effective mode manipulation, which is not difficult, fortunately because the mode dispersion in multimode silicon optical waveguide is very strong. Great progresses have been achieved on multimode silicon photonics in the past years. In this paper, a review of the recent progresses of the representative multimode silicon photonic devices and circuits is given. The first part reviews multimode silicon photonics for MDM systems, including on-chip multichannel mode (de)multiplexers, multimode waveguide bends, multimode waveguide crossings, reconfigurable multimode silicon photonic integrated circuits, multimode chip-fiber couplers, etc. In the second part, we give a discussion about the higher-order mode-assisted silicon photonic devices, including on-chip polarization-handling devices with higher-order modes, add-drop optical filters based on multimode Bragg gratings, and some emerging applications.

Data rates in optical fiber networks have increased exponentially over the past decades and core-networks are expected to operate in the peta-bit-per-second regime by 2030. As current single-mode fiber-based transmission systems are reaching their capacity limits, space-division multiplexing has been investigated as a means to increase the per-fiber capacity. Of all space-division multiplexing fibers proposed to date, multi-mode fibers have the highest spatial channel density, as signals traveling in orthogonal fiber modes share the same fiber-core. By combining a high mode-count multi-mode fiber with wideband wavelength-division multiplexing, we report a peta-bit-per-second class transmission demonstration in multi-mode fibers. This was enabled by combining three key technologies: a wideband optical comb-based transmitter to generate highly spectral efficient 64-quadrature-amplitude modulated signals between 1528 nm and 1610 nm wavelength, a broadband mode-multiplexer, based on multi-plane light conversion, and a 15-mode multi-mode fiber with optimized transmission characteristics for wideband operation. Space division multiplexing solutions are one way to increase future fiber information capacity. Here, the authors show peta-bit/s transmission in a standard-diameter, multimode fiber enabled by combining several practical multiplexing technologies.

Photonic bound states in the continuum (BICs) have been exploited in various systems and found numerous applications. Here, we investigate high-order BICs and apply BICs on an integrated photonic platform to high-dimensional optical communication. A four-channel TM mode (de)multiplexer using different orders of BICs on an etchless lithium niobate (LiNbO 3 ) platform where waveguides are constructed by a low-refractive-index material on a high-refractive-index substrate is demonstrated. Low propagation loss of the TM modes in different orders and phase-matching conditions for efficient excitation of the high-order TM modes are simultaneously achieved. A chip consisting of four-channel mode (de)multiplexers was fabricated and measured with data transmission at 40 Gbps/channel. All the channels have insertion loss <4.0 dB and crosstalk <−9.5 dB in a 70-nm wavelength band. Therefore, the demonstrated mode (de)multiplexing and high-dimensional communication on LiNbO 3 platform can meet the increasing demand for high capacity in on-chip optical communication. Here, the authors investigate high-order bound states in the continuum and apply them on an integrated photonic platform for high-dimensional optical communication. The demonstrated mode (de)multiplexing and high-dimensional communication can enhance the data capacity with low insertion loss and crosstalk.

Long-range acoustic communication is crucial to underwater applications such as collection of scientific data from benthic stations, ocean geology, and remote control of off-shore industrial activities. However, the transmission rate of acoustic communication is always limited by the narrow-frequency bandwidth of the acoustic waves because of the large attenuation for high-frequency sound in water. Here, we demonstrate a high-throughput communication approach using the orbital angular momentum (OAM) of acoustic vortex beams with one order enhancement of the data transmission rate at a single frequency. The topological charges of OAM provide intrinsically orthogonal channels, offering a unique ability to multiplex data transmission within a single acoustic beam generated by a transducer array, drastically increasing the information channels and capacity of acoustic communication. A high spectral efficiency of 8.0 ± 0.4 (bit/s)/Hz in acoustic communication has been achieved using topological charges between −4 and +4 without applying other communication modulation techniques. Such OAM is a completely independent degree of freedom which can be readily integrated with other state-of-the-art communication modulation techniques like quadrature amplitude modulation (QAM) and phase-shift keying (PSK). Information multiplexing through OAM opens a dimension for acoustic communication, providing a data transmission rate that is critical for underwater applications.

Broadband quantum memories, used as temporal multiplexers, are a key component in photonic quantum information processing, as they make repeat-until-success strategies scalable. We demonstrate a prototype system, operating on-demand, by interfacing a warm vapour, high time-bandwidth-product Raman memory with a travelling wave spontaneous parametric down-conversion source. We store single photons and observe a clear influence of the input photon statistics on the retrieved light, which we find currently to be limited by noise. We develop a theoretical model that identifies four-wave mixing as the sole important noise source and point towards practical solutions for noise-free operation.

The tremendous growth of data traffic has spurred a rapid evolution of optical communications for a higher data transmission capacity. Next-generation fiber-optic communication systems will require dramatically increased complexity that cannot be obtained using discrete components. In this context, silicon photonics is quickly maturing. Capable of manipulating electrons and photons on the same platform, this disruptive technology promises to cram more complexity on a single chip, leading to orders-of-magnitude reduction of integrated photonic systems in size, energy, and cost. This paper provides a system perspective and reviews recent progress in silicon photonics probing all dimensions of light to scale the capacity of fiber-optic networks toward terabits-per-second per optical interface and petabits-per-second per transmission link. Firstly, we overview fundamentals and the evolving trends of silicon photonic fabrication process. Then, we focus on recent progress in silicon coherent optical transceivers. Further scaling the system capacity requires multiplexing techniques in all the dimensions of light: wavelength, polarization, and space, for which we have seen impressive demonstrations of on-chip functionalities such as polarization diversity circuits and wavelength- and space-division multiplexers. Despite these advances, large-scale silicon photonic integrated circuits incorporating a variety of active and passive functionalities still face considerable challenges, many of which will eventually be addressed as the technology continues evolving with the entire ecosystem at a fast pace.

In this manuscript, we first suggest a single-layer 2:1 QCA MUX with an ultra-low number of cells and high speed. Unlike existing designs, the output of the proposed design does not comply with the Boolean regulation and is produced using the essential characteristics of quantum technology. Single-layer 4:1 and 8:1 QCA multiplexers have also been implemented. Moreover, using the proposed 2:1 QCA MUX, a novel and efficient QCA RAM memory cell with the set and reset abilities has been proposed. Forasmuch as the most significant challenge in quantum-dot cellular automata circuit design is the number of cell counts and occupied area. The proposed 2:1 QCA MUX includes 10 cells and an occupied area of 0.03. The unique advantage of the proposed design over all previous output generation tasks is based on cellular interactions. Our findings showed that the proposed 2:1 QCA MUX has a 16.66% and 60% improvement in terms of cell count and occupied area, respectively. In order to confirm the function of the proposed design, some physical proofs are presented. The software for implement of the circuits and their power analysis are QCADesigner 2.0.3 and QCAPro, respectively. The results of the comparisons indicate that the proposed structures are more efficient than the existing ones. The QCAPro power analysis tool has been used for analyzing the power consumption of the proposed designs.

The escalating demands of compute-intensive applications urgently necessitate the adoption of optical interconnect technologies to overcome bottlenecks in scaling computing systems. This requires fully exploiting the inherent parallelism of light across scalable dimensions for data loading. Here we experimentally demonstrate a synergy of wavelength- and mode- multiplexing combined with high-order modulation formats to achieve multi-tens-of-terabits-per-second optical interconnects using foundry-compatible silicon photonic circuits. Implementing an edge-guided analog-and-digital optimization method that integrates high efficiency with fabrication robustness, we achieve the inverse design of mode multiplexers based on digital metamaterial waveguides. Furthermore, we employ a packaged five-mode multiplexing chip, achieving a single-wavelength interconnect capacity of 1.62 Tbit s − 1 and a record-setting multi-dimensional interconnect capacity of 38.2 Tbit s − 1 across 5 modes and 88 wavelength channels, with high-order formats up to 8-ary pulse-amplitude-modulation (PAM). This study highlights the transformative potential of optical interconnect technologies to surmount the constraints of electronic links, thus setting the stage for next-generation datacenter and optical compute interconnects. This study demonstrates a 38.2 Tbit/s optical interconnect using silicon photonic circuits, combining wavelength- and mode-multiplexing with high-order modulation for ultra-high-capacity data transmission and scaling next-gen computing systems.

Mode conversion effects in Fibre Bragg Gratings (FBGs) are widely exploited in applications such as sensing and fibre lasers. However, when FBGs are inscribed into Few-mode optical Fibres (FMFs), the mode interactions become highly complex due to the increased number of guided modes, rendering their practical use difficult. In this study, we investigate whether the addition of a spatial mode multiplexer, used to selectively excite specific fibre modes, can simplify the interpretation and utility of few-mode FBGs (FM-FBGs). We focus on point-by-point (PbP)-inscribed FBGs, localised with respect to the transverse cross-section of the fibre core, and study their interaction with a range of Hermitian Gauss input modes. We present a comprehensive numerical study supported by experimental validation, examining the mechanisms of mode coupling induced by localised FBGs and its implications, with a focus on sensing applications. Our results show that the introduction of a spatial mode multiplexer leads to slight simplification of the FBG transmission spectrum. Nevertheless, significant simplification of the reflection spectrum is achievable after modal filtering occurs as the reflected light re-traverses the spatial mode multiplexer, potentially enabling WDM monitoring of FM-FBGs. Notably, we report a novel approach to multiplexing FBGs based on their transverse location within the fibre core and the modal content initially coupled into the fibre. To the best of our knowledge, this multiplexing technique is yet to be reported.