Explore the vast range of titles available.

Intron removal requires assembly of the spliceosome on precursor mRNA (pre-mRNA) and extensive remodelling to form the spliceosome’s catalytic centre. Here we report the cryo-electron microscopy structure of the yeast Saccharomyces cerevisiae pre-catalytic B complex spliceosome at near-atomic resolution. The mobile U2 small nuclear ribonucleoprotein particle (snRNP) associates with U4/U6.U5 tri-snRNP through the U2/U6 helix II and an interface between U4/U6 di-snRNP and the U2 snRNP SF3b-containing domain, which also transiently contacts the helicase Brr2. The 3′ region of the U2 snRNP is flexibly attached to the SF3b-containing domain and protrudes over the concave surface of tri-snRNP, where the U1 snRNP may reside before its release from the pre-mRNA 5′ splice site. The U6 ACAGAGA sequence forms a hairpin that weakly tethers the 5′ splice site. The B complex proteins Prp38, Snu23 and Spp381 bind the Prp8 N-terminal domain and stabilize U6 ACAGAGA stem–pre-mRNA and Brr2–U4 small nuclear RNA interactions. These results provide important insights into the events leading to active site formation. The cryo-electron microscopy structure of the yeast spliceosome in a pre-catalytic state provides insights into the molecular events leading to formation of the spliceosome active site. Visualization of a poised spliceosome Protein-coding regions of DNA can be interrupted by non-coding regions, or introns. A large multisubunit complex, the spliceosome, is used to excise introns from the messenger RNA before it is translated into protein. Formation of an active spliceosome complex on an intron requires stepwise assembly of subcomplexes, followed by their rearrangement and the loss of some factors. Kiyoshi Nagai and colleagues have solved the structure of the B complex spliceosome, poised in a pre-catalytic state. The detection of several factors that were not visualized in previous spliceosome structures provides new insights regarding the process by which the complex is activated.

The prespliceosome, comprising U1 and U2 small nuclear ribonucleoproteins (snRNPs) bound to the precursor messenger RNA 5ʹ splice site (5ʹSS) and branch point sequence, associates with the U4/U6.U5 tri-snRNP to form the fully assembled precatalytic pre–B spliceosome. Here, we report cryo–electron microscopy structures of the human pre–B complex captured before U1 snRNP dissociation at 3.3-angstrom core resolution and the human tri-snRNP at 2.9-angstrom resolution. U1 snRNP inserts the 5ʹSS–U1 snRNA helix between the two RecA domains of the Prp28 DEAD-box helicase. Adenosine 5ʹ-triphosphate–dependent closure of the Prp28 RecA domains releases the 5ʹSS to pair with the nearby U6 ACAGAGA-box sequence presented as a mobile loop. The structures suggest that formation of the 5ʹSS-ACAGAGA helix triggers remodeling of an intricate protein-RNA network to induce Brr2 helicase relocation to its loading sequence in U4 snRNA, enabling Brr2 to unwind the U4/U6 snRNA duplex to allow U6 snRNA to form the catalytic center of the spliceosome.

U4/U6.U5 tri-snRNP represents a substantial part of the spliceosome before activation. A cryo-electron microscopy structure of Saccharomyces cerevisiae U4/U6.U5 tri-snRNP at 3.7 Å resolution led to an essentially complete atomic model comprising 30 proteins plus U4/U6 and U5 small nuclear RNAs (snRNAs). The structure reveals striking interweaving interactions of the protein and RNA components, including extended polypeptides penetrating into subunit interfaces. The invariant ACAGAGA sequence of U6 snRNA, which base-pairs with the 5′-splice site during catalytic activation, forms a hairpin stabilized by Dib1 and Prp8 while the adjacent nucleotides interact with the exon binding loop 1 of U5 snRNA. Snu114 harbours GTP, but its putative catalytic histidine is held away from the γ-phosphate by hydrogen bonding to a tyrosine in the amino-terminal domain of Prp8. Mutation of this histidine to alanine has no detectable effect on yeast growth. The structure provides important new insights into the spliceosome activation process leading to the formation of the catalytic centre. A 3.7 Å resolution structure for the yeast U4/U6.U5 tri-snRNP, a complex involved in splicing, allows a better appreciation of the architecture of the tri-snRNP, and offers new functional insights into the activation of the spliceosome and the assembly of the catalytic core. Yeast U4/U6.U5 tri-snRNP structure Following up on their 5.9 Å cryo-electron microscopy structure published less than a year ago, Kiyoshi Nagai and colleagues have now achieved a resolution of 3.7 Å for the yeast U4/U6.U5 tri-snRNP, a complex involved in splicing of messenger RNA. The improved resolution allows a better appreciation of the architecture of the tri-snRNP, and offers new functional insights into the activation of the spliceosome and the assembly of the catalytic core.

The separation of the rare earth elements is essential for numerous scientific applications but remains a significant challenge due to the nearly identical chemical properties of the adjacent lanthanide elements. Eichrom’s LN series of extraction chromatographic resins feature organophosphorus extractants and are widely used to achieve adjacent lanthanide separations. While extensive characterization of these resins has been completed for nitric acid matrices, the use of hydrochloric acid is preferred for a variety of applications. The extraction of the rare earth elements, La–Lu and Y, has been characterized on LN and LN2 resins in hydrochloric acid via batch uptake and column chromatographic studies.

The spliceosome catalyses the excision of introns from pre-mRNA in two steps, branching and exon ligation, and is assembled from five small nuclear ribonucleoprotein particles (snRNPs; U1, U2, U4, U5, U6) and numerous non-snRNP factors 1 . For branching, the intron 5′ splice site and the branch point sequence are selected and brought by the U1 and U2 snRNPs into the prespliceosome 1 , which is a focal point for regulation by alternative splicing factors 2 . The U4/U6.U5 tri-snRNP subsequently joins the prespliceosome to form the complete pre-catalytic spliceosome. Recent studies have revealed the structural basis of the branching and exon-ligation reactions 3 , however, the structural basis of the early events in spliceosome assembly remains poorly understood 4 . Here we report the cryo-electron microscopy structure of the yeast Saccharomyces cerevisiae prespliceosome at near-atomic resolution. The structure reveals an induced stabilization of the 5′ splice site in the U1 snRNP, and provides structural insights into the functions of the human alternative splicing factors LUC7-like (yeast Luc7) and TIA-1 (yeast Nam8), both of which have been linked to human disease 5 , 6 . In the prespliceosome, the U1 snRNP associates with the U2 snRNP through a stable contact with the U2 3′ domain and a transient yeast-specific contact with the U2 SF3b-containing 5′ region, leaving its tri-snRNP-binding interface fully exposed. The results suggest mechanisms for 5′ splice site transfer to the U6 ACAGAGA region within the assembled spliceosome and for its subsequent conversion to the activation-competent B-complex spliceosome 7 , 8 . Taken together, the data provide a working model to investigate the early steps of spliceosome assembly. The cryo-electron microscopy structure of the Saccharomyces cerevisiae prespliceosome provides insights into splice-site selection and early spliceosome assembly events.

Precursor mRNA (pre-mRNA) splicing proceeds by two consecutive transesterification reactions via a lariat–intron intermediate. Here we present the 3.8 Å cryo-electron microscopy structure of the spliceosome immediately after lariat formation. The 5′-splice site is cleaved but remains close to the catalytic Mg 2+ site in the U2/U6 small nuclear RNA (snRNA) triplex, and the 5′-phosphate of the intron nucleotide G(+1) is linked to the branch adenosine 2′OH. The 5′-exon is held between the Prp8 amino-terminal and linker domains, and base-pairs with U5 snRNA loop 1. Non-Watson–Crick interactions between the branch helix and 5′-splice site dock the branch adenosine into the active site, while intron nucleotides +3 to +6 base-pair with the U6 snRNA ACAG AGA sequence. Isy1 and the step-one factors Yju2 and Cwc25 stabilize docking of the branch helix. The intron downstream of the branch site emerges between the Prp8 reverse transcriptase and linker domains and extends towards the Prp16 helicase, suggesting a plausible mechanism of remodelling before exon ligation. Cryo-EM reveals the configuration of substrate pre-mRNA within the active spliceosome and suggests how remodelling occurs prior to exon ligation. Structure of the branched splicing complex The excision of introns from RNA is not a concerted process, but is rather an ordered one involving two transesterification reactions by the spliceosome. In the first step, the 5′-splice site is cleaved and the intron end is joined to make a lariat structure. Kiyoshi Nagai and colleagues have captured the Saccharomyces cerevisiae spliceosome stalled immediately after this first transesterification (branching) reaction by cryo-electron microscopy single-particle reconstruction at an overall resolution of 3.8 Å. The configuration of the RNA within the complex suggests that remodelling occurs before the second step, exon ligation.

The uptake of 241 Am, 244 Cm and 249 Cf with LN resin was studied in HCl and HNO 3 solutions with concentrations ranging from 0.02 to 2.5 M. There is high uptake at concentrations < 0.1 M in both acids for all three isotopes with decreasing uptake at higher concentrations and negligible extraction at ≥ 0.6 M. Californium has a higher extraction than americium and curium, which are extremely similar. Kinetics studies showed rapid uptake of all three isotopes. Column studies were performed to demonstrate the separation of 241 Am and 249 Cf, and a bulk separation including nine stable lanthanides along with 241 Am, 249 Cf, and 88 Y.

Eukaryotic DNA replication is carried out by two DNA polymerases, Pol ɛ and Pol δ. An in vitro –replication system reconstituted with purified yeast components identifies the factors that selectively recruit each polymerase for leading- or lagging-strand synthesis. Eukaryotes use distinct polymerases for leading- and lagging-strand replication, but how they target their respective strands is uncertain. We reconstituted Saccharomyces cerevisiae replication forks and found that CMG helicase selects polymerase (Pol) ɛ to the exclusion of Pol δ on the leading strand. Even if Pol δ assembles on the leading strand, Pol ɛ rapidly replaces it. Pol δ–PCNA is distributive with CMG, in contrast to its high stability on primed ssDNA. Hence CMG will not stabilize Pol δ, instead leaving the leading strand accessible for Pol ɛ and stabilizing Pol ɛ. Comparison of Pol ɛ and Pol δ on a lagging-strand model DNA reveals the opposite. Pol δ dominates over excess Pol ɛ on PCNA-primed ssDNA. Thus, PCNA strongly favors Pol δ over Pol ɛ on the lagging strand, but CMG over-rides and flips this balance in favor of Pol ɛ on the leading strand.

The U4/U6.U5 triple small nuclear ribonucleoprotein (tri-snRNP) is a major spliceosome building block. We obtained a three-dimensional structure of the 1.8-megadalton human tri-snRNP at a resolution of 7 angstroms using single-particle cryo–electron microscopy (cryo-EM). We fit all known high-resolution structures of tri-snRNP components into the EM density map and validated them by protein cross-linking. Our model reveals how the spatial organization of Brr2 RNA helicase prevents premature U4/U6 RNA unwinding in isolated human tri-snRNPs and how the ubiquitin C-terminal hydrolase–like protein Sad1 likely tethers the helicase Brr2 to its preactivation position. Comparison of our model with cryo-EM three-dimensional structures of the Saccharomyces cerevisiae tri-snRNP and Schizosaccharomyces pombe spliceosome indicates that Brr2 undergoes a marked conformational change during spliceosome activation, and that the scaffolding protein Prp8 is also rearranged to accommodate the spliceosome's catalytic RNA network.

Splicing of precursor messenger RNA is accomplished by a dynamic megacomplex known as the spliceosome. Assembly of a functional spliceosome requires a preassembled U4/U6.U5 tri-snRNP complex, which comprises the U5 small nuclear ribonucleoprotein (snRNP), the U4 and U6 small nuclear RNA (snRNA) duplex, and a number of protein factors. Here we report the three-dimensional structure of a Saccharomyces cerevisiae U4/U6.U5 tri-snRNP at an overall resolution of 3.8 angstroms by single-particle electron cryomicroscopy. The local resolution for the core regions of the tri-snRNP reaches 3.0 to 3.5 angstroms, allowing construction of a refined atomic model. Our structure contains U5 snRNA, the extensively base-paired U4/U6 snRNA, and 30 proteins including Prp8 and Snu114, which amount to 8495 amino acids and 263 nucleotides with a combined molecular mass of ~1 megadalton. The catalytic nucleotide U80 from U6 snRNA exists in an inactive conformation, stabilized by its base-pairing interactions with U4 snRNA and protected by Prp3. Pre-messenger RNA is bound in the tri-snRNP through base-pairing interactions with U6 snRNA and loop I of U5 snRNA. This structure, together with that of the spliceosome, reveals the molecular choreography of the snRNAs in the activation process of the spliceosomal ribozyme.