Explore the vast range of titles available.

Well activation is one of the most important aspects in the oil and gas industries and nitrogen gas is predominately used. The gas, being light, is sent down the producing reservoir which will enhance the production or improve the flow of crude oil. In addition to the methods used to increase production there are several problems like sand production and water production from the producing wells.Sand production occurs when the destabilizing stresses at the formation face exceed the strength of the natural arching tendencies and/or grain-to-grain cementation strength. Ideally, during oil production, the formation should be porous, permeable and well consolidated through which hydrocarbons can easily flow into the production wells. But sometimes, especially during production from unconsolidated sandstone reservoirs, the produced hydrocarbons may also carry large amounts of sand into the well bore and sand entering production wells is one of the oldest problems faced by oil companies and one of the toughest to solve. These unconsolidated formations may not restrain grain movement, and produce sand along with the fluids especially at high rates.Water production is also a problem that many reservoir or production engineers face in day-to-day life. As engineers we should be able to decide whether water control solutions should be applied or not. The excess production of water is caused by the depletion of the reservoir and simply sweeps away most of the oil that the reservoir can produce.This book gives an information how well activation using nitrogen is carried out, and how sand control and water control issues can be resolved.

The effect of corrosion in the oil industry leads to the failure of parts. This failure results in shutting down the plant to clean the facility. The annual cost of corrosion to the oil and gas industry in the United States alone is estimated at $27 billion (According to NACE International)-leading some to estimate the global annual cost to the oil and gas industry as exceeding $60 billion. In addition, corrosion commonly causes serious environmental problems, such as spills and releases. An essential resource for all those who are involved in the corrosion management of oil and gas infrastructure, this book provides engineers and designers with the tools and methods to design and implement comprehensive corrosion-management programs for oil and gas infrastructures. The book addresses all segments of the industry, including production, transmission, storage, refining and distribution.

Mathematically rigorous, computationally fast, and easy to use, this new approach to electromagnetic well logging gives the reservoir engineer a new dimension to MWD/LWD interpretation and tool design Almost all publications on borehole electromagnetics deal with idealizations that are not acceptable physically. On the other hand, \"exact models\" are only available through detailed finite element or finite difference analysis, and more often than not, simply describe case studies for special applications. In either case, the models are not available for general use and the value of the publications is questionable. This new approach provides a rigorous, fully three-dimensional solution to the general problem, developed over almost two decades by a researcher familiar with practical applications and mathematical modeling. Completely validated against exact solutions and physics-based checks through over a hundred documented examples, the self-contained model (with special built-in matrix solvers and iteration algorithms) with a \"plain English graphical user interface\" has been optimized to run extremely fast – seconds per run as opposed to minutes and hours – and then automatically presents all electric and magnetic field results through integrated three-dimensional color graphics. In addition to state-of-the-art algorithms, basic \"utility programs\" are also developed, such as simple dipole methods, Biot-Savart large diameter models, nonlinear phase and amplitude interpolation algorithms, and so on. Incredibly useful to oilfield practitioners, this volume is a must-have for serious professionals in the field, and all the algorithms have undergone a laborious validation process with real use in the field.

The Planning Committee on Connector Reliability for Offshore Oil and Natural Gas Operations held the Workshop on Bolting Reliability for Offshore Oil and Natural Gas Operations in Washington, D.C., on April 10-11, 2017. The workshop was designed to advance and develop a comprehensive awareness of the outstanding issues associated with fastener material failures and equipment reliability issues. Speakers and participants were also encouraged to discuss possible paths for ameliorating risks associated with fasteners used for subsea critical equipment in oil and gas operations. This publication summarizes the presentations and discussions from the workshop.