Explore the vast range of titles available.

Until now, the clinical differentiation between a nevus and a melanoma is still challenging in some cases. Line-field confocal optical coherence tomography (LC-OCT) is a new tool with the aim to change that. The aim of the study was to evaluate LC-OCT for the discrimination between nevi and melanomas. A total of 84 melanocytic lesions were examined with LC-OCT and 36 were also imaged with RCM. The observers recorded the diagnoses, and the presence or absence of the 18 most common imaging parameters for melanocytic lesions, nevi, and melanomas in the LC-OCT images. Their confidence in diagnosis and the image quality of LC-OCT and RCM were evaluated. The most useful criteria, the sensitivity and specificity of LC-OCT vs. RCM vs. histology, to differentiate a (dysplastic) nevus from a melanoma were analyzed. Good image quality correlated with better diagnostic performance (Spearman correlation: 0.4). LC-OCT had a 93% sensitivity and 100% specificity compared to RCM (93% sensitivity, 95% specificity) for diagnosing a melanoma (vs. all types of nevi). No difference in performance between RCM and LC-OCT was observed (McNemar’s p value = 1). Both devices falsely diagnosed dysplastic nevi as non-dysplastic (43% sensitivity for dysplastic nevus diagnosis). The most significant criteria for diagnosing a melanoma with LC-OCT were irregular honeycombed patterns (92% occurrence rate; 31.7 odds ratio (OR)), the presence of pagetoid spread (89% occurrence rate; 23.6 OR) and the absence of dermal nests (23% occurrence rate, 0.02 OR). In conclusion LC-OCT is useful for the discrimination between melanomas and nevi.

This study presents fundamental experiment and optical diagnostics on the ignition and combustion process of micron-sized aluminum particles in high-temperature turbulent environment. Firstly, the turbulent methane burner based on tangential swirl stabilization was developed to create a high-temperature turbulent exhaust for the ignition and combustion of aluminum particles. The particle image velocimetry (PIV) and hot-wire anemometer techniques were used to characterize the cold flow field of the turbulent burner, indicating that the pulsation intensity in the centerline exceeded 14%. In addition, the spectral temperature measurement method was employed to map the temperature field of turbulent hot exhaust. The results show that compared with the laminar flow environment with similar temperature and oxygen concentration, the turbulent exhaust with a bulk Reynolds number of approximately 2320 can shorten the ignition delay and combustion time of aluminum particles by more than 70%. Moreover, the promoting effect becomes more significant with the increase of turbulence intensity. To understand the interaction between turbulent flow and particle combustion, the high-speed microscopic imaging technology captured the dynamic process of mechanical stripping of aluminum particle oxide caps in the high-speed flow field, providing direct evidence of the aerodynamic shear effect of turbulence.

A clear margin is an important prognostic factor for most solid tumours treated by surgery. Intraoperative fluorescence imaging using exogenous tumour-specific fluorescent agents has shown particular benefit in improving complete resection of tumour tissue. However, signal processing for fluorescence imaging is complex, and fluorescence signal intensity does not always perfectly correlate with tumour location. Raman spectroscopy has the capacity to accurately differentiate between malignant and healthy tissue based on their molecular composition. In Raman spectroscopy, specificity is uniquely high, but signal intensity is weak and Raman measurements are mainly performed in a point-wise manner on microscopic tissue volumes, making whole-field assessment temporally unfeasible. In this review, we describe the state-of-the-art of both optical techniques, paying special attention to the combined intraoperative application of fluorescence imaging and Raman spectroscopy in current clinical research. We demonstrate how these techniques are complementary and address the technical challenges that have traditionally led them to be considered mutually exclusive for clinical implementation. Finally, we present a novel strategy that exploits the optimal characteristics of both modalities to facilitate resection with clear surgical margins.

This paper reports on an experimental study of the influence of a nanosecond repetitively pulsed spark discharge on the stability domain of a propane/air flame. This flame is produced in a lean premixed swirled combustor representative of an aeronautical combustion chamber. The lean extinction limits of the flame produced without and with plasma are determined and compared. It appears that only a low mean discharge power is necessary to increase the flame stability domain. Lastly, the effects of several parameters (pulse repetition frequency, global flowrate, electrode location) are studied.

Huntington’s disease (HD) is an autosomal dominant, incurable neurodegenerative disease caused by mutation in the huntingtin gene (HTT). HTT mutation leads to protein misfolding and aggregation, which affect cells’ functions and structural features. Because these changes might modify the scattering strength of affected cells, we propose that random lasing (RL) is an appropriate technique for detecting cells that express mutated HTT. To explore this hypothesis, we used a cell model of HD based on the expression of two different forms—pathogenic and non-pathogenic—of HTT. The RL signals from both cell profiles were compared. A multivariate statistical analysis of the RL signals based on the principal component analysis (PCA) and linear discriminant analysis (LDA) techniques revealed substantial differences between cells that expressed the pathogenic and the non-pathogenic forms of HTT.

In this work, the structure of laminar premixed ethylene/air flat flames at low pressure are studied experimentally. The aim of the work is to exploit the spatial expansion of laminar 1D flames and advanced laser techniques to better understand the conditions and precursors affecting soot particles inception. Soot volume fraction ( f v ) profiles were measured using laser-induced incandescence (LII), while spatial distribution of the CH * and C 2 * radicals was measured using spatially resolved emission spectroscopy. Spatially resolved laser-induced fluorescence has been used to record emission from 2–3 rings, 3–4 rings and > 5 rings. The temperature of soot particles ( T s ) was evaluated through fitting the spectrally resolved soot luminosity, while flame gaseous temperature ( T g ) was measured using a fine thermocouple. The laminar flow velocity was modeled and used to evaluate the reaction time at each HAB. Taking advantage of the expanded flame structure at low pressure, the profiles of CH * , C 2 * , soot and temperatures, as a function of the height above the burner, were well resolved. It was found that CH * and C 2 * chemiluminescence overlap in space. The thickness of CH * layer is larger than that of C 2 * , and it peaks at slightly different location, CH * appears approximately 1 mm before C 2 * . The distance between the two peaks decreases linearly with the increase in pressure. The lowest value of the initial soot volume fraction ( f v ) was 0.19 ppb, measured at pressure 27 kPa. It was found that f v scales with the pressure following a power function of the form f v α Pr n , where n is 2.15 ± 0.7. It was observed that, in all the flames investigated, the initial soot particles first appear at a common critical inception temperature, T inception , of 1465 ± 66 K. It was found that the T inception is lower than the maximum flame temperature, T max , by ~ 45° and appeared ~ 1 mm further than the location of T max . Using the Lagrangian quantity df v /dt and f v , it was possible to reveal the soot growth rate, k SG . At pressure of 27 kPa, the value of k SG was evaluated as 20 s −1 .

Multispectral imaging can provide objective quantitative data on various clinical pathologies, e.g., abnormal content of bio-substances in human skin. Performance of diagnostics increases with decreased spectral bandwidths of imaging; from this point, ultra-narrowband laser spectral line imaging is well suited for diagnostic applications. In this study, 40 volunteers participated in clinical validation tests of a newly developed prototype device for triple laser line whole-body skin imaging. The device comprised a vertically movable high-resolution camera coupled with a specific illumination unit—a side-emitting optical fiber spiral that emits simultaneously three RGB laser spectral lines at the wavelengths 450 nm, 520 nm, and 628 nm. The prototype’s design details, skin spectral image processing, and the obtained first clinical data are reported and discussed.

Acute myocardial infarction (MI) is found to be a major causative factor for global mortality and morbidity. This situation demands necessity of developing efficient and rapid diagnostic tools to detect acute MI. Raman spectroscopy is a non-destructive optical diagnostic technique, which has high potential in probing biochemical changes in clinical samples during initiation and progress of diseases. In this work, blood was taken as the sample to examine inflammation in acute MI patients using Raman spectroscopy. Ratio of Raman peak intensities that corresponds to phenylalanine (1000 cm−1) and tyrosine (825 cm−1) can facilitate indirect information about tetrahydrobiopterin (BH4) availability, which can indicate inflammatory status in patients. This ratio obtained was higher for MI patients in comparison with control subjects. The decrease in phenylalanine and tyrosine ratio (Phe-Tyr ratio) is attributed to the prognosis of standard of care (medications like antiplatelets including aspirin, statin and revascularisation) leading to inflammation reduction. Phe-Tyr ratio estimated from the Raman spectra of blood can be exploited as a reliable method to probe inflammation due to MI. The method is highly objective, require only microliters of sample and minimal sample preparation, signifying its clinical utility.

This paper investigates the abnormal combustion behavior—specifically knock and pre-ignition—of a hydrogen direct-injection (H2-DI) engine operated under stoichiometric conditions. Two different cylinder head configurations with central and lateral injector placement are analyzed using thermodynamic measurements, CFD simulations, and the optical diagnostic system VISIOLution®. The results show that combustion stability and knock tendency are significantly influenced by injector positioning, injection pressure, and ignition timing. Controlled mixture formation and high turbulence during the compression phase are key to achieving both high power density and thermal efficiency in hydrogen-fueled engines.

The article considers the potential applicability of C12880MA and C11708MA Hamamatsu microspectrometers, which are characterized by an extremely compact design, occupying a small volume of several cubic centimeters, in portable spectrometric equipment with spatial resolution for monitoring the optical properties of condensed scattering media. The development of methods for determining the reduced scattering and absorption spectral coefficients of radiation from various scattering materials and products allows us to speak about the possibility of real-time control of the volume concentration of optically active components included in them, for example, fat and water in dairy products. For this, it is necessary to provide sufficiently accurate spectra of diffusely reflected broadband light radiation at different distances between the points of radiation entrance and registration. The aim of the manuscript is to assess the possibility of using the considered microspectrometers in compact devices for optical diagnostics and control of the optical properties of condensed scattering media. The features of the connection diagram of these microspectrometers and the necessary methods for correcting the initially obtained spectral dependencies of diffusive reflection, which will be of interest to developers of spectral diagnostic equipment, are considered in detail. The need to eliminate the influence of the inhomogeneity of dark counts of a CMOS photodiode array is shown. The hardware functions of the C12880MA and C11708MA Hamammatsu microspectrometers, as well as the AvaSpec 2048L fiber-optic spectrometer, were experimentally measured and compared. Methods for correcting the nonlinearity of their reading scales and light characteristics, as well as improving their equivalent spectral resolution using digital Wiener filtering, are described. It is shown that the equivalent spectral resolution of C12880MA and C11708MA microspectrometers can be improved by about 40% when recording smooth spectra, subject to the condition that the resulting side oscillations are small. It is pointed out that in order to reduce the level of side oscillations in the corrected spectra with improved resolution, it is necessary to ensure the smoothness of the original spectra and a good signal-to-noise ratio. A conclusion is made about the possibility of using the considered microspectrometers in portable spectrometric equipment with careful consideration of their characteristics, the features of their switching circuit, and the necessary software.