Explore the vast range of titles available.

Ocular infection due to microbial contamination is one of the main risks associated with the wearing of contact lens, which demands novel straightforward strategies to find reliable solutions. This contribution reports the preparation, characterization and biological evaluation of soft contact lenses (CL) releasing nitric oxide (NO), as an unconventional antibacterial agent, under daylight exposure. A tailored NO photodonor (NOPD) was embedded into commercial CL leading to doped CL with an excellent optical transparency (transmittance = 100%) at λ ≥ 450 nm. The NOPD results homogeneously distributed in the CL matrix where it fully preserves the photobehavior exhibited in solution. In particular, NO release from the CL and its diffusion in the supernatant physiological solution is observed upon visible light illumination. The presence of a blue fluorescent reporting functionality into the molecular skeleton of the NOPD, which activates concomitantly to the NO photorelease, allows the easy monitoring of the NO delivery in real-time and confirms that the doped CL work under daylight exposure. The NO photoreleasing CL are well-tolerated in both dark and light conditions by corneal cells while being able to induce good growth inhibition of Staphylococcus aureus under visible light irradiation. These results may pave the way to further engineering of the CL with NOPD as innovative ocular devices activatable by sunlight.

Organic–inorganic perovskites such as CH 3 NH 3 PbI 3 are promising materials for a variety of optoelectronic applications, with certified power conversion efficiencies in solar cells already exceeding 21%. Nevertheless, state-of-the-art films still contain performance-limiting non-radiative recombination sites and exhibit a range of complex dynamic phenomena under illumination that remain poorly understood. Here we use a unique combination of confocal photoluminescence (PL) microscopy and chemical imaging to correlate the local changes in photophysics with composition in CH 3 NH 3 PbI 3 films under illumination. We demonstrate that the photo-induced ‘brightening’ of the perovskite PL can be attributed to an order-of-magnitude reduction in trap state density. By imaging the same regions with time-of-flight secondary-ion-mass spectrometry, we correlate this photobrightening with a net migration of iodine. Our work provides visual evidence for photo-induced halide migration in triiodide perovskites and reveals the complex interplay between charge carrier populations, electronic traps and mobile halides that collectively impact optoelectronic performance. Visual evidence for photo-induced ionic migration in perovskite films without contacts is lacking. Here, the authors use a unique combination of confocal photoluminescence microscopy and chemical imaging to correlate the local changes in photophysics with composition in CH 3 NH 3 PbI 3 films under illumination.

The development of an “artificial photosynthetic system” (APS) having both the analogous important structural elements and reaction features of photosynthesis to achieve solar-driven water splitting and CO 2 reduction is highly challenging. Here, we demonstrate a design strategy for a promising 3D APS architecture as an efficient mass flow/light harvesting network relying on the morphological replacement of a concept prototype-leaf's 3D architecture into perovskite titanates for CO 2 photoreduction into hydrocarbon fuels (CO and CH 4 ). The process uses artificial sunlight as the energy source, water as an electron donor and CO 2 as the carbon source, mimicking what real leaves do. To our knowledge this is the first example utilizing biological systems as “architecture-directing agents” for APS towards CO 2 photoreduction, which hints at a more general principle for APS architectures with a great variety of optimized biological geometries. This research would have great significance for the potential realization of global carbon neutral cycle.

Calcium oxide (CaO) nanoparticles are known to exhibit unique property due to their high adsorption capacity and good catalytic activity. In this work the CaO nanocatalysts were prepared by hydrothermal method using anionic surfactant, sodium dodecyl sulphate (SDS), as a templating agent. The as-synthesized nanocatalysts were further used as substrate for the synthesis of alumina doped calcium oxide (Al2O3·CaO) nanocatalysts via deposition-precipitation method at the isoelectric point of CaO. The Al2O3·CaO nanocatalysts were characterized by FTIR, XRD, TGA, TEM, and FESEM techniques. The catalytic efficiencies of these nanocatalysts were studied for the photodegradation of 2,4,6-trinitrophenol (2,4,6-TNP), which is an industrial pollutant, spectrophotometrically. The effect of surfactant and temperature on size of nanocatalysts was also studied. The smallest particle size and highest percentage of degradation were observed at critical micelle concentration of the surfactant. The direct optical band gap of the Al2O3·CaO nanocatalyst was found as 3.3 eV.

A major drawback of traditional photocatalysts like TiO 2 is that they can only work under illumination and the light has to be UV. As a solution for this limitation, visible-light-driven energy storage photocatalysts have been developed in recent years. However, energy storage photocatalysts that are full-sunlight-driven (UV-visible-NIR) and possess long-lasting energy storage ability are lacking. Here we report, a Pt-loaded and hydrogen-treated WO 3 that exhibits a strong absorption at full-sunlight spectrum (300–1,000 nm) and with a super-long energy storage time of more than 300 h to have formaldehyde degraded in dark. In this new material system, the hydrogen treated WO 3 functions as the light harvesting material and energy storage material simultaneously, while Pt mainly acts as the cocatalyst to have the energy storage effect displayed. The extraordinary full-spectrum absorption effect and long persistent energy storage ability make the material a potential solar-energy storage and an effective photocatalyst in practice.

In this letter, we report, for the first time, the real-time in situ nucleation and growth of Ag filaments on α-Ag 2 WO 4 crystals driven by an accelerated electron beam from an electronic microscope under high vacuum. We employed several techniques to characterise the material in depth. By using these techniques combined with first-principles modelling based on density functional theory, a mechanism for the Ag filament formation followed by a subsequent growth process from the nano- to micro-scale was proposed. In general, we have shown that an accelerated electron beam from an electronic microscope under high vacuum enables in situ visualisation of Ag filaments with subnanometer resolution and offers great potential for addressing many fundamental issues in materials science, chemistry, physics and other fields of science.

Excitonic solar cells 1 —including organic, hybrid organic–inorganic and dye-sensitized cells (DSCs)—are promising devices for inexpensive, large-scale solar energy conversion. The DSC is currently the most efficient 2 and stable 3 excitonic photocell. Central to this device is a thick nanoparticle film that provides a large surface area for the adsorption of light-harvesting molecules. However, nanoparticle DSCs rely on trap-limited diffusion for electron transport, a slow mechanism that can limit device efficiency, especially at longer wavelengths. Here we introduce a version of the dye-sensitized cell in which the traditional nanoparticle film is replaced by a dense array of oriented, crystalline ZnO nanowires. The nanowire anode is synthesized by mild aqueous chemistry and features a surface area up to one-fifth as large as a nanoparticle cell. The direct electrical pathways provided by the nanowires ensure the rapid collection of carriers generated throughout the device, and a full Sun efficiency of 1.5% is demonstrated, limited primarily by the surface area of the nanowire array.

Artificial photosynthesis to carry out both the oxidation and the reduction of water has emerged to be an exciting area of research. It has been possible to photochemically generate oxygen by using a scheme similar to the Z-scheme, by using suitable catalysts in place of water-oxidation catalyst in the Z-scheme in natural photosynthesis. The best oxidation catalysts are found to be Co and Mn oxides with the e1g configuration. The more important aspects investigated pertain to the visible-light-induced generation of hydrogen by using semiconductor heterostructures of the type ZnO/Pt/Cd1−xZnxS and dye-sensitized semiconductors. In the case of heterostructures, good yields of H2 have been obtained. Modifications of the heterostructures, wherein Pt is replaced by NiO, and the oxide is substituted with different anions are discussed. MoS2 and MoSe2 in the 1T form yield high quantities of H2 when sensitized by Eosin Y. Two-step thermochemical splitting of H2O using metal oxide redox pairs provides a strategy to produce H2 and CO. Performance of the Ln0.5A0.5MnO3 (Ln = rare earth ion, A = Ca, Sr) family of perovskites is found to be promising in this context. The best results to date are found with Y0.5Sr0.5MnO3.

Nitric oxide (NO) is recognized as one of the major players in various biochemical processes, including blood pressure, neurotransmission and immune responses. However, experimental studies involving NO are often limited by difficulties associated with the use of NO gas, including its toxicity and precise control over NO concentration. Moreover, the reactions of NO with biological molecules, which frequently occur on time scales of microseconds or faster, are limited by the millisecond time scale of conventional stopped-flow techniques. Here we present a new approach for studying rapid biological reactions involving NO. The method is based on designed ruthenium and manganese nitrosyls, [Ru(PaPy3)(NO)](BF4)2 and [Mn(PaPy3)(NO)](ClO4) (PaPy3H = N,N–bis(2-pyridylmethyl)amine-N-ethyl-2-pyridine-2-carboxamide), which upon photolysis produce NO on a fast time scale. The kinetics of the binding of the photogenerated NO to reduced cytochrome c oxidase (CcO) and myoglobin (Mb) was investigated using time-resolved optical absorption spectroscopy. The NO was found to bind to reduced CcO with an apparent lifetime of 77 μs using the [Mn(PaPy3)(NO)]+ complex; the corresponding rate is 10–20 times faster than can be detected by conventional stopped-flow methods. Second-order rate constants of ∼1 × 108M−1 s−1 and ∼3 × 107M−1 s−1 were determined for NO binding to reduced CcO and Mb, respectively. The generation of NO by photolysis of these complexes circumvents the rate limitation of stopped-flow techniques and offers a novel alternative to study other fast biological reactions involving NO.

Advances in micro-nano fabrication technology have enabled flexible electrochemical sensors to utilize micro-nanostructures and nanomaterials. Herein, a 3D AZO@ZnONRs core–shell nanostructure was synthesized using atomic layer deposition and hydrothermal techniques. The structure was employed to fabricate a high-sensitivity glucose sensor capable of precise detection of blood glucose levels and glucose content in sugary beverages. The sensor demonstrated a highly linear response (0–12.5 mM), with a sensitivity of approximately 6.49 µA·mM −1 ·cm −2 and a detection limit of 1.561 µM. Under ultraviolet light, the sensitivity increased by 1.83-fold. In the presence of interferents such as potassium chloride, sodium chloride, lactic acid, urea, and uric acid, the sensor maintained excellent specificity. Compared to conventional nanorods, this 3D core–shell material preserved the advantages of a high specific surface area while demonstrating enhanced electron transfer capabilities and photosensitivity, enabling reliable detection of glucose at extremely low concentrations. This study systematically analyzed the characteristics of the core–shell nanomaterial and its photocatalytic mechanisms, advancing photocatalytic electrochemical sensing technology. Graphical Abstract