Explore the vast range of titles available.

To develop voltage‐controlled magnetization switching technologies for spintronics applications, a highly (422)‐oriented Co2FeSi layer on top of the piezoelectric PMN‐PT(011) is experimentally demonstrated by inserting a vanadium (V) ultra‐thin layer. The strength of the growth‐induced magnetic anisotropy of the (422)‐oriented Co2FeSi layers can be artificially controlled by tuning the thicknesses of the inserted V and the grown Co2FeSi layers. As a result, a giant converse magnetoelectric effect (over 10−5 s m−1) and a non‐volatile binary state at zero electric field are simultaneously achieved in the (422)‐oriented Co2FeSi/V/PMN‐PT(011) multiferroic heterostructure. This study leads to a way toward magnetoresistive random‐access‐memory (MRAM) with a low power writing technology. Voltage‐controlled magnetization switching based on the converse magnetoelectric effect is one of the key technologies for future spintronic memory devices. In this study, highly (422)‐oriented Co2FeSi/V/PMN‐PT multiferroic heterostructures is experimentally developed with giant converse magnetoelectric effect and controlled nonvolatile binary states.

Conventional electromagnetic generators are limited to low‐power applications owing to their mechanical complexity, bulky design, and reduced efficiency at small scales. Their performance is further hindered by the resistive torque according to Lenz's law, which makes them unsuitable for low‐load environments. To overcome these challenges, we propose a novel in‐wheel direct‐current piezoelectric generator (DC‐PG), which enables efficient power generation with zero resistive torque and does not require rectification. The system leverages continuous in‐phase polarization during rotation to deliver a stable low‐ripple DC output with minimal energy loss. Integrated into a suitcase wheel without adding weight or volume, the DC‐PG achieved a peak power of 4.28 mW under realistic conditions (20 kg load, 3–5 km/h), surpassing conventional AC‐based piezoelectric systems. It successfully powered a wireless Internet of things (IoT) location sensor, charging a 5 V capacitor in 134 s. This compact rectification‐free generator is a viable solution for small‐scale power generation and self‐powered IoT applications. Its high‐efficiency performance and elimination of electromagnetic resistance open new possibilities for energy autonomy in low‐speed, low‐load environments. In this paper, we present a wheel‐shaped direct‐current piezoelectric generator (DC‐PG) that fundamentally overcomes these constraints by producing phase‐stable DC electricity directly from rolling motion. By embedding this system into suitcase wheels, we demonstrated a fully integrated real‐time location tracking system powered solely by mechanical motion, eliminating the need for external power or batteries.

Alternating-current poling (ACP) is becoming a mainstream method because of its stronger ability in promoting the piezoelectric performance of ferroelectric single crystals than that of direct-current poling (DCP). A novel approach was developed by incorporating alternating-current poling and direct-current poling as modified alternating-current poling (MACP). According to the comparison of performance differences between AC-poled and DC-poled single crystals, the properties of MACP single crystals under specific conditions were systematically investigated. The improvement of single crystal performance by MACP is manifested by the multi-peak increase in piezoelectric coefficient (d33) and relative dielectric permittivity (ε33T/ε0), and the coupling factor (kt) value under higher DC bias is higher than that under DC polarization, rather than a direct superposition of DCP and ACP. Two optimal polarization windows were found: 0.2–0.25 kV/mm and 0.35–0.6 kV/mm. Compared with DCP, MACP increases the d33, ε33T/ε0 and kt, of single crystals by up to 45.67%, 21.62%, and 24.54%, respectively. This significant performance improvement, combined with its complexity, provides a new direction for customizing the performance of single crystals.

A seismic data acquisition system based on wireless network transmission is designed to improve the low-frequency response and low sensitivity of the existing acquisition system. The system comprises of a piezoelectric transducer, a high-resolution data acquisition system, and a wireless communication module. A seismic piezoelectric transducer based on a piezoelectric simply supported beam using PMN-PT is proposed. High sensitivity is obtained by using a new piezoelectric material PMN-PT, and a simply supported beam matching with the PMN-PT wafer is designed, which can provide a good low-frequency response. The data acquisition system includes an electronic circuit for charge conversion, filtering, and amplification, an FPGA, and a 24-bit analog-to-digital converter (ADC). The wireless communication was based on the ZigBee modules and the WiFi modules. The experimental results show that the application of the piezoelectric simply supported beam based on PMN-PT can effectively improve the sensitivity of the piezoelectric accelerometer by more than 190%, compared with the traditional PZT material. At low frequencies, the fidelity of the PMN-PT piezoelectric simply supported beam is better than that of a traditional central compressed model, which is an effective expansion of the bandwidth to the low-frequency region. The charge conversion, filtering, amplification, and digitization of the output signal of the piezoelectric transducer are processed and, finally, are wirelessly transmitted to the monitoring centre, achieving the design of a seismic data acquisition system based on wireless transmission.

Existing tunable optical metasurfaces based on the electro-optic effect are either complex in structure or have a limited phase modulation range. In this paper, a simple rectangular metasurface structure based on a Pb(Mg1/3Nb2/3)O3-PbTiO3 (PMN-PT) crystal with high electro-optic coefficient of 120 pm/V was designed to demonstrate its electrically tunable performance in the optical communication band through simulations. By optimizing the structure parameters, a tunable metasurface was generated that can induce a complete 2π phase shift for beam deflection while maintaining relatively uniform transmittance. Simulations further demonstrated the electrical tunability of the beam deflection direction and operating wavelength of the metasurface. This tunable optical metasurface, with its simple and easily fabricated structure, can promote the development and application of multifunctional and controllable metasurfaces. Its adjustable beam deflection direction and operating wavelength may find applications in fields such as optical communication systems and imaging.

A vector hydrophone is an underwater acoustic sensor that can detect the direction of a sound source. Wide-band characteristics and high sensitivity enhance the performance of underwater surveillance systems in complex environments. A vector hydrophone comprising a triaxial piezoelectric accelerometer and spherical hydrophone was fabricated and tested in the air and underwater. The vector hydrophone was designed to exceed the quantitative figures of merit (i.e., receiving voltage sensitivity and bandwidth) of commercially available hydrophones. Accelerometer performance was enhanced by placing a pair of piezoelectric single crystals on each axis and modifying the seismic mass material. The receiving voltage sensitivity of the omnidirectional hydrophone was approximately −160 dB relative to 1 V/μPa with the amplifier in water; the sensitivity of the accelerometer exceeded 300 mV/g in air and −215 dB relative to 1 V/μPa underwater over the frequency range of interest. The receiving directivity of the vector hydrophone was validated underwater, which confirmed that it could detect the direction of a sound source.

Multifunctional sensors have played a crucial role in constructing high-integration electronic networks. Most of the current multifunctional sensors rely on multiple materials to simultaneously detect different physical stimuli. Here, we demonstrate the large piezo-pyroelectric effect in ferroelectric Pb(Mg1/3Nb2/3)O3-PbTiO3 (PMN-PT) single crystals for simultaneous pressure and temperature sensing. The outstanding piezoelectric and pyroelectric properties of PMN-PT result in rapid response speed and high sensitivity, with values of 46 ms and 28.4 nA kPa−1 for pressure sensing, and 1.98 s and 94.66 nC °C−1 for temperature detection, respectively. By leveraging the distinct differences in the response speed of piezoelectric and pyroelectric responses, the piezo-pyroelectric effect of PMN-PT can effectively detect pressure and temperature from mixed-force thermal stimuli, which enables a robotic hand for stimuli classification. With appealing multifunctionality, fast speed, high sensitivity, and compact structure, the proposed self-powered bimodal sensor therefore holds significant potential for high-performance artificial perception.

The quest to realize new kinds of data storage devices has motivated recent studies in the field of magnetoelectric heterostructures. One of the most commonly investigated systems is Fe3O4/[Pb(Mg 1/3Nb2/3)O3]0.7–[PbTiO3]0.3 (PMN-PT), however, the interplay between different coupling mechanisms is not yet well understood. To disentangle the role of strain and polarisation influence in Fe3O4/PMN-PT, we report on magnetoelectric coupling measurements for different orientations of the applied magnetic field and for two different substrate cuts, PMN-PT(001) and PMN-PT(011). For Fe3O4/PMN-PT(011), having the sample aligned such that the magnetic field is parallel to the [011‾] easy axis leads to a remanent increase of the magnetisation for each electric field cycle. On the other hand, for the magnetic field along the [100] hard axis, the magnetisation follows a butterfly-like loop characteristic of strain coupling imparted by the substrate. For Fe3O4/PMN-PT(001), the magnetoelectric effect is a superposition of the observed behaviour of both in-plane directions in Fe3O4/PMN-PT(011). The magnetisation shows an initial remanent increase followed by a butterfly like loop. Polarised neutron reflectometry measurements on Fe3O4/PMN-PT(011) shows no difference between the behaviour at the interface and the bulk of the film and no decline of the interaction further away from the shared interface. Our results demonstrate the role of strain and polarisation on the magnetisation of the Fe3O4 layer and provide a clear step towards the design of future magnetoelectric systems.

[011] poled relaxor-PT single crystals provide superior piezoelectric constants and electromechanical coupling factors in the 32 crystal directions, and also exhibit high electrical stability under compressive stresses and temperature changes. In particular, Mn-doped Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 (Mn:PIN-PMN-PT) single crystals show a superior coercive field (EC ≥ 8.0 kV/cm) and mechanical quality factor (Qm ≥ 1030), making them suitable for high-power transducers. The high-power characteristics of [011] poled single crystals have been verified from a material perspective; thus, further investigation is required from a transducer perspective. In this study, the high-power characteristics of piezoelectric transducers based on [011] poled PIN-PMN-PT and [011] poled Mn:PIN-PMN-PT single crystals were investigated. To analyze the driving limits of the single crystals, the polarization–electric field (P–E) curves, as a function of the driving electric field, were measured. The results showed that [011] poled Mn:PIN-PMN-PT single crystals demonstrate lower energy loss and THD (Total Harmonic Distortion), directly relating to the driving efficiency and linearity of the transducer. Additionally, [011] poled Mn:PIN-PMN-PT crystals provide excellent stability under the compressive stress and temperature changes. To analyze the high-power characteristics of [011] poled single-crystal transducers, two types of barrel-stave transducers, based on [011] poled PIN-PMN-PT and [011] poled Mn:PIN-PMN-PT, were designed and fabricated. The changes in the impedance and transmitting voltage response with respect to the driving electric fields were measured, and the energy loss and THD of the transducers with respect to the driving electric fields were examined to assess the driving limit of the [011] poled single-crystal transducer. The high-power characteristic tests confirmed the stability of [011] poled Mn:PIN-PMN-PT single crystals and verified their potential for high-power transducer applications.

Piezoelectric composites, which consist of a piezoelectric material and a polymer, have been extensively studied for the applications of underwater sonar sensors and medical diagnostic ultrasonic transducers. Acoustic sensors utilizing piezoelectric composites can have a high sensitivity and wide bandwidth because of their high piezoelectric coefficient and low acoustic impedance compared to single-phase piezoelectric materials. In this study, a thickness-mode driving hydrophone utilizing a 2-2 piezoelectric single crystal composite was examined. From the theoretical and numerical analysis, material properties that determine the bandwidth and sensitivity of the thickness-mode piezoelectric plate were derived, and the voltage sensitivity of piezoelectric plates with various configurations was compared. It was shown that the 2-2 composite with [011] poled single crystals and epoxy polymers can provide high sensitivity and wide bandwidth when used for hydrophones with a thickness resonance mode. The hydrophone element was designed and fabricated to have a thickness mode at a frequency around 220 kHz by attaching a composite plate of quarter-wavelength thickness to a hard baffle. The fabricated hydrophone demonstrated an open circuit voltage sensitivity of more than −180 dB re 1 V/μPa at the resonance frequency and a −3 dB bandwidth of more than 55 kHz. The theoretical and experimental studies show that the 2-2 single crystal composite can have a high sensitivity and wide bandwidth compared to other configurations of piezoelectric elements when they are used for thickness-mode hydrophones.