Catalogue Search | MBRL
Are you sure you want to remove the book from the shelf?
{{itemTitle}}
214
result(s) for
"Phobos (Satellite)"
Sort by:
Science operation plan of Phobos and Deimos from the MMX spacecraft
The science operations of the spacecraft and remote sensing instruments for the Martian Moon eXploration (MMX) mission are discussed by the mission operation working team. In this paper, we describe the Phobos observations during the first 1.5 years of the spacecraft’s stay around Mars, and the Deimos observations before leaving the Martian system. In the Phobos observation, the spacecraft will be placed in low-altitude quasi-satellite orbits on the equatorial plane of Phobos and will make high-resolution topographic and spectroscopic observations of the Phobos surface from five different altitudes orbits. The spacecraft will also attempt to observe polar regions of Phobos from a three-dimensional quasi-satellite orbit moving out of the equatorial plane of Phobos. From these observations, we will constrain the origin of Phobos and Deimos and select places for landing site candidates for sample collection. For the Deimos observations, the spacecraft will be injected into two resonant orbits and will perform many flybys to observe the surface of Deimos over as large an area as possible.
Journal Article
The MMX rover: performing in situ surface investigations on Phobos
The Japanese MMX sample return mission to Phobos by JAXA will carry a rover developed by CNES and DLR that will be deployed on Phobos to perform in situ analysis of the Martian moon’s surface properties. Past images of the surface of Phobos show that it is covered by a layer of regolith. However, the mechanical and compositional properties of this regolith are poorly constrained. In particular, from current remote images, very little is known regarding the particle sizes, their chemical composition, the packing density of the regolith as well as other parameters such as friction and cohesion that influence surface dynamics. Understanding the properties and dynamics of the regolith in the low-gravity environment of Phobos is important to trace back its history and surface evolution. Moreover, this information is also important to support the interpretation of data obtained by instruments onboard the main MMX spacecraft, and to minimize the risks involved in the spacecraft sampling operations. The instruments onboard the Rover are a Raman spectrometer (RAX), an infrared radiometer (miniRad), two forward-looking cameras for navigation and science purposes (NavCams), and two cameras observing the interactions of regolith and the rover wheels (WheelCams). The Rover will be deployed before the MMX spacecraft samples Phobos’ surface and will be the first rover to drive on the surface of a Martian moon and in a very low gravity environment.Graphic Abstract
Journal Article
High-resolution shape models of Phobos and Deimos from stereophotoclinometry
We created high-resolution shape models of Phobos and Deimos using stereophotoclinometry and united images from Viking Orbiter, Phobos 2, Mars Global Surveyor, Mars Express, and Mars Reconnaissance Orbiter into a single coregistered collection. The best-fit ellipsoid to the Phobos model has radii of (12.95 ± 0.04) km × (11.30 ± 0.04) km × (9.16 ± 0.03) km, with an average radius of (11.08 ± 0.04) km. The best-fit ellipsoid to the Deimos model has radii of (8.04 ± 0.08) km × (5.89 ± 0.06) km × (5.11 ± 0.05) km with an average radius of (6.27 ± 0.07) km. The new shape models offer substantial improvements in resolution over existing shape models, while remaining globally consistent with them. The Phobos model resolves grooves, craters, and other surface features ~ 100 m in size across the entire surface. The Deimos model is the first to resolve geological surface features. These models, associated data products, and a searchable, coregistered collection of images across six spacecraft are publicly available in the Small Body Mapping Tool, and will be archived with the NASA Planetary Data System. These products enable an array of future studies to advance the understanding of Phobos and Deimos, facilitate coregistration of other past and future datasets, and set the stage for planning and operating future missions to the moons, including the upcoming Martian Moons eXploration (MMX) mission.
Journal Article
Surface environment of Phobos and Phobos simulant UTPS
The Martian Moons eXploration (MMX) mission will study the Martian moons Phobos and Deimos, Mars, and their environments. The mission scenario includes both landing on the surface of Phobos to collect samples and deploying a small rover for in situ observations. Engineering safeties and scientific planning for these operations require appropriate evaluations of the surface environment of Phobos. Thus, the mission team organized the Landing Operation Working Team (LOWT) and Surface Science and Geology Sub-Science Team (SSG-SST), whose view of the Phobos environment is summarized in this paper. While orbital and large-scale characteristics of Phobos are relatively well known, characteristics of the surface regolith, including the particle size-distributions, the packing density, and the mechanical properties, are difficult to constrain. Therefore, we developed several types of simulated soil materials (simulant), such as UTPS-TB (University of Tokyo Phobos Simulant, Tagish Lake based), UTPS-IB (Impact-hypothesis based), and UTPS-S (Simpler version) for engineering and scientific evaluation experiments.
Journal Article
In situ science on Phobos with the Raman spectrometer for MMX (RAX): preliminary design and feasibility of Raman measurements
Mineralogy is the key to understanding the origin of Phobos and its position in the evolution of the Solar System. In situ Raman spectroscopy on Phobos is an important tool to achieve the scientific objectives of the Martian Moons eXploration (MMX) mission, and maximize the scientific merit of the sample return by characterizing the mineral composition and heterogeneity of the surface of Phobos. Conducting in situ Raman spectroscopy in the harsh environment of Phobos requires a very sensitive, compact, lightweight, and robust instrument that can be carried by the compact MMX rover. In this context, the Raman spectrometer for MMX (i.e., RAX) is currently under development via international collaboration between teams from Japan, Germany, and Spain. To demonstrate the capability of a compact Raman system such as RAX, we built an instrument that reproduces the optical performance of the flight model using commercial off-the-shelf parts. Using this performance model, we measured mineral samples relevant to Phobos and Mars, such as anhydrous silicates, carbonates, and hydrous minerals. Our measurements indicate that such minerals can be accurately identified using a RAX-like Raman spectrometer. We demonstrated a spectral resolution of approximately 10 cm−1, high enough to resolve the strongest olivine Raman bands at ~ 820 and ~ 850 cm−1, with highly sensitive Raman peak measurements (e.g., signal-to-noise ratios up to 100). These results strongly suggest that the RAX instrument will be capable of determining the minerals expected on the surface of Phobos, adding valuable information to address the question of the moon’s origin, heterogeneity, and circum-Mars material transport.
Journal Article
Simulation of gravity field estimation of Phobos for Martian Moon eXploration (MMX)
We study the dynamic orbit about Phobos of the Martian Moon eXploration (MMX) spacecraft and simulate gravity field estimation using Doppler, image landmarks, and LIght Detection And Ranging (LIDAR) data based on a mission plan of MMX and investigate whether the differences in the internal density structure of Phobos can be detected through this mission. Degree 2 Stokes coefficients of the Phobos gravity field,
C
¯
20
and
C
¯
22
, which are necessary to obtain the moment of inertia by combining with the libration amplitude, could be determined with an accuracy within the order of 0.1% using datasets from two-dimensional (2D) quasi-satellite orbits (QSOs). If observations from 3D-QSO could be realized at low altitude, coefficients up to degree and order 5 could be estimated, which could be used to detect regional density anomalies. Moreover, the observation data from the ascending trajectory after landing on the Phobos surface can be used to detect local density anomalies around the landing site, which could help interpret the origin of the samples and understand the internal structure of Phobos.
Graphical Abstract
Journal Article
MMX geodesy investigations: science requirements and observation strategy
In order to investigate the origin of Phobos and Deimos, the Japanese Martian Moons eXploration (MMX) mission is scheduled for launch in 2024. MMX will make comprehensive remote-sensing measurements of both moons and return regolith samples from Phobos to Earth. Geodetic measurements of gravity, shape, and rotation parameter of a body provides constraints on its internal structure reflecting its origin and evolution. Moments of inertia are important parameters to constrain the internal mass distribution, but they have not been well determined for the Martian moons yet. We discuss the mission requirements related to the moments of inertia to detect a potential heterogeneity of the mass distribution inside Phobos. We introduce mission instruments and operational strategies to meet the mission requirements. We present a preliminary imaging strategy from a quasi-satellite orbit for a base shape model that is expected to be created at the early stage of the mission. Geodetic products including ephemeris, gravity field, rotation parameter of Phobos, and spacecraft orbit are of importance not only for the geodetic study, but also for interpreting data from various mission instruments and selecting possible landing sites.
Journal Article
