Explore the vast range of titles available.

The purpose of this paper is to discuss the different generations of photovoltaic cells and current research directions focusing on their development and manufacturing technologies. The introduction describes the importance of photovoltaics in the context of environmental protection, as well as the elimination of fossil sources. It then focuses on presenting the known generations of photovoltaic cells to date, mainly in terms of the achievable solar-to-electric conversion efficiencies, as well as the technology for their manufacture. In particular, the third generation of photovoltaic cells and recent trends in its field, including multi-junction cells and cells with intermediate energy levels in the forbidden band of silicon, are discussed. We also present the latest developments in photovoltaic cell manufacturing technology, using the fourth-generation graphene-based photovoltaic cells as an example. An extensive review of the world literature led us to the conclusion that, despite the appearance of newer types of photovoltaic cells, silicon cells still have the largest market share, and research into ways to improve their efficiency is still relevant.

The realization of a complete techno‐economy through a significant carbon dioxide (CO2) reduction in the atmosphere has been explored to promote a low‐carbon economy in various ways. CO2 reduction reactions (CO2RRs) can be induced using sustainable energy, including electric and solar energy, using systems such as electrochemical (EC) CO2RR and photoelectrochemical (PEC) systems. This study summarizes various fabrication strategies for non‐noble metal, copper‐based, and metal–organic framework‐based catalysts with excellent Faradaic efficiency (FE) for target carbon compounds, and for noble metals with low overvoltage. Although EC and PEC systems achieve high energy conversion efficiency with excellent catalysts, they still require external power and lack complete bias–free operation. Therefore, photovoltaics, which can overcome the limitations of these systems, have been introduced. The utilization of silicon and perovskite‐based solar cells for photovoltaics‐assisted EC (PV‐EC) and photovoltaics‐assisted PEC (PV‐PEC) CO2RR systems are cost‐efficient, and the III–V semiconductor photoabsorbers achieved high solar‐to‐carbon efficiency. This work focuses on PV‐EC and PV‐PEC CO2RR systems and their components and then summarizes the special cell configurations, including the tandem and stacked structures. Additionally, the study discusses current issues, such as low energy conversion, expensive PV, theoretical limits, and industrial scale–up, along with proposed solutions.

Perovskite solar cells have recently drawn significant attention for photovoltaic applications with a certified power conversion efficiency of more than 22%. Unfortunately, the toxicity of the dissolvable lead content in these materials presents a critical concern for future commercial development. This review outlines some criteria for the possible replacement of lead by less toxic elements, and highlights current research progress in the application of low-lead halide perovskites as optically active materials in solar cells. These criteria are discussed with the aim of developing a better understanding of the physio-chemical properties of perovskites and of realizing similar photovoltaic performance in perovskite materials either with or without lead. Some open questions and future development prospects are outlined for further advancing perovskite solar cells toward both low toxicity and high efficiency.

We present an overview of opto-electronic characterization techniques for solar cells including light-induced charge extraction by linearly increasing voltage, impedance spectroscopy, transient photovoltage, charge extraction and more. Guidelines for the interpretation of experimental results are derived based on charge drift-diffusion simulations of solar cells with common performance limitations. It is investigated how nonidealities like charge injection barriers, traps and low mobilities among others manifest themselves in each of the studied cell characterization techniques. Moreover, comprehensive parameter extraction for an organic bulk-heterojunction solar cell comprising PCDTBT:PC 70 BM is demonstrated. The simulations reproduce measured results of 9 different experimental techniques. Parameter correlation is minimized due to the combination of various techniques. Thereby a route to comprehensive and accurate parameter extraction is identified.

Photovoltaic generation has stepped up within the last decade from outsider status to one of the important contributors of the ongoing energy transition, with about 1.7% of world electricity provided by solar cells. Progress in materials and production processes has played an important part in this development. Yet, there are many challenges before photovoltaics could provide clean, abundant, and cheap energy. Here, we review this research direction, with a focus on the results obtained within a Japan-French cooperation program, NextPV, working on promising solar cell technologies. The cooperation was focused on efficient photovoltaic devices, such as multijunction, ultrathin, intermediate band, and hot-carrier solar cells, and on printable solar cell materials such as colloidal quantum dots.

Cathode interlayer (CIL) materials play an important role in improving the power conversion efficiency (PCE) of organic photovoltaic (OPV) cells. However, the current understanding of the structure-property relationship in CIL materials is limited, and systematic studies in this regard are scarce. Here, two new CIL materials, NDI-PhC4 and NDI-PhC6 were synthesized by varying the alkylamine chain length on the NDI-Ph core. Our investigation reveals a systematic variation in the physical and chemical properties of these materials with increasing alkylamine chain length. Specifically, we observe a sequential decrease in melting point and self-doping effect, accompanied by an enhancement in crystallinity. Among these CIL materials, NDI-PhC4 has a notable balance across various performance metrics. It also exhibits excellent surface modification capabilities, leading to a low surface roughness. Consequently, OPV cells based on NDI-PhC4 achieve a PCE of 20.2%, which is one of the highest reported efficiencies for OPV cells. In addition, the appropriate melting point of NDI-PhC4 contributes to the excellent stability of OPV cells.

The performance improvement of conventional CdTe solar cells is mainly limited by doping concentration and minority carrier life time. Alloying CdTe with an isovalent element changes its properties, for example its band gap and behaviour of dopants, which has a significant impact on its performance as a solar cell absorber. In this work, the structural, optical, and electronic properties of CdTe 1-x Se x films are examined for different Se concentrations. The band gap of this compound changes with composition with a minimum of 1.40 eV for x = 0.3. We show that with increasing x, the lattice constant of CdTe 1-x Se x decreases, which can influence the solubility of dopants. We find that alloying CdTe with Se changes the effect of Cu doping on the p-type conductivity in CdTe 1-x Se x , reducing the achievable charge carrier concentration with increasing x. Using a front surface CdTe 1-x Se x layer, compositional, structural and electronic grading is introduced to solar cells. The efficiency is increased, mostly due to an increase in the short-circuit current density caused by a combination of lower band gap and a better interface between the absorber and window layer, despite a loss in the open-circuit voltage caused by the lower band gap and reduced charge carrier concentration.

Renewable energy resources have gained considerable attention in recent years due to their efficiency and economic benefits. Their proportion of total energy use continues to grow over time. Photovoltaic (PV) cell and wind energy generation are the least-expensive new energy sources in most countries. Renewable energy technologies significantly contribute to climate mitigation and provide economic benefits. Apart from these advantages, renewable energy sources, particularly solar energy, have drawbacks, for instance restricted energy supply, reliance on weather conditions, and being affected by several kinds of faults, which cause a high power loss. Usually, the local PV plants are small in size, and it is easy to trace any fault and defect; however, there are many PV cells in the grid-connected PV system where it is difficult to find a fault. Keeping in view the aforedescribed facts, this paper presents an intelligent model to detect faults in the PV panels. The proposed model utilizes the Convolutional Neural Network (CNN), which is trained on historic data. The dataset was preprocessed before being fed to the CNN. The dataset contained different parameters, such as current, voltage, temperature, and irradiance, for five different classes. The simulation results showed that the proposed CNN model achieved a training accuracy of 97.64% and a testing accuracy of 95.20%, which are much better than the previous research performed on this dataset.

In a few years only, solar cells using hybrid organic-inorganic lead halide perovskites as optical absorber have reached record photovoltaic energy conversion efficiencies above 20%. To reach and overcome such values, it is required to tailor both the electrical and optical properties of the device. For a given efficient device, optical optimization overtakes electrical one. Here, we provide a synthetic review of recent works reporting or proposing so-called optical management approaches for improving the efficiency of perovskite solar cells, including the use of anti-reflection coatings at the front substrate surface, the design of optical cavities integrated within the device, the incorporation of plasmonic or dielectric nanostructures into the different layers of the device and the structuration of its internal interfaces. We finally give as outlooks some insights into the less-explored management of the perovskite fluorescence and its potential for enhancing the cell efficiency.

Multi-junction solar cells show the highest photovoltaic energy conversion efficiencies, but the current technologies based on wafers and epitaxial growth of multiple layers are very costly. Therefore, there is a high interest in realizing multi-junction tandem devices based on cost-effective thin film technologies. While the efficiency of such devices has been limited so far because of the rather low efficiency of semitransparent wide bandgap top cells, the recent rise of wide bandgap perovskite solar cells has inspired the development of new thin film tandem solar devices. In order to realize monolithic, and therefore current-matched thin film tandem solar cells, a bottom cell with narrow bandgap (~1 eV) and high efficiency is necessary. In this work, we present Cu(In,Ga)Se 2 with a bandgap of 1.00 eV and a maximum power conversion efficiency of 16.1%. This is achieved by implementing a gallium grading towards the back contact into a CuInSe 2 base material. We show that this modification significantly improves the open circuit voltage but does not reduce the spectral response range of these devices. Therefore, efficient cells with narrow bandgap absorbers are obtained, yielding the high current density necessary for thin film multi-junction solar cells.