Catalogue Search | MBRL
Are you sure you want to remove the book from the shelf?
{{itemTitle}}
241,295
result(s) for
"Pollutants"
Sort by:
Construction of Novel Z-Scheme g-Csub.3Nsub.4/AgBr-Ag Composite for Efficient Photocatalytic Degradation of Organic Pollutants under Visible Light
As a green and sustainable technology to relieve environmental pollution issues, semiconductor photocatalysis attracted great attention. However, most single-component semiconductors suffer from high carrier recombination rate and low reaction efficiency. Here, we constructed a novel visible-light-driven Z-scheme g-C[sub.3]N[sub.4]/AgBr-Ag photocatalyst (noted as CN-AA-0.05) using a hydrothermal method with KBr as the bromine source. The CN-AA-0.05 photocatalyst shows an excellent photocatalytic degradation performance, and a rhodamine B (RhB) degradation ratio of 96.3% in 40 min, and 2-mercaptobenzothiazole (MBT) degradation ratio of 99.2% in 18 min are achieved. Mechanistic studies show that the remarkable performance of CN-AA-0.05 is not only attributed to the enhanced light absorption caused by the Ag SPR effect, but also the efficient charge transfer and separation with Ag nanoparticles as the bridge. Our work provides a reference for the design and construction of efficient visible-light-responsive Z-scheme photocatalysts, and an in-depth understanding into the mechanism of Z-scheme photocatalysts.
Journal Article
Arsenic Uptake, Toxicity, Detoxification, and Speciation in Plants: Physiological, Biochemical, and Molecular Aspects
Environmental contamination with arsenic (As) is a global environmental, agricultural and health issue due to the highly toxic and carcinogenic nature of As. Exposure of plants to As, even at very low concentration, can cause many morphological, physiological, and biochemical changes. The recent research on As in the soil-plant system indicates that As toxicity to plants varies with its speciation in plants (e.g., arsenite, As(III); arsenate, As(V)), with the type of plant species, and with other soil factors controlling As accumulation in plants. Various plant species have different mechanisms of As(III) or As(V) uptake, toxicity, and detoxification. This review briefly describes the sources and global extent of As contamination and As speciation in soil. We discuss different mechanisms responsible for As(III) and As(V) uptake, toxicity, and detoxification in plants, at physiological, biochemical, and molecular levels. This review highlights the importance of the As-induced generation of reactive oxygen species (ROS), as well as their damaging impacts on plants at biochemical, genetic, and molecular levels. The role of different enzymatic (superoxide dismutase, catalase, glutathione reductase, and ascorbate peroxidase) and non-enzymatic (salicylic acid, proline, phytochelatins, glutathione, nitric oxide, and phosphorous) substances under As(III/V) stress have been delineated via conceptual models showing As translocation and toxicity pathways in plant species. Significantly, this review addresses the current, albeit partially understood, emerging aspects on (i) As-induced physiological, biochemical, and genotoxic mechanisms and responses in plants and (ii) the roles of different molecules in modulation of As-induced toxicities in plants. We also provide insight on some important research gaps that need to be filled to advance our scientific understanding in this area of research on As in soil-plant systems.
Journal Article
Pollutant discharge and water quality in urbanisation
The main purpose of water quality monitoring may be seen as evaluating water quality conformity against water quality standards, especially for administrative purposes. Moreover, water quality monitoring data can be applied to estimate and evaluate pollutant loads in rivers. Chronological water quality fluctuations and vertical water quality profiles in water bodies are also important when taking into account the effects of land-based pollutants on coastal sea and estuary water quality. This book discusses the relationships between pollutant discharge and water quality, taking into account urban development and indicators like the pollutant load per capita flowing into the water body (PLCwb), an index used to evaluate the contribution of municipal wastewater pollutant discharge to pollutant loads flowing into ambient water bodies such as coastal zones, bays and lakes.
Book
Designing Highly Active S-g-Csub.3Nsub.4/Te@NiS Ternary Nanocomposites for Antimicrobial Performance, Degradation of Organic Pollutants, and Their Kinetic Study
The current research is about the synthesis of pure nickel sulfide, a series of Te (0, 0.5, 1, 1.5, 2, and 3 wt.%)-doped NiS (Te@NiS) nanoparticles (NPs), and a series of S-g-C[sub.3]N[sub.4] (10, 30, 50, 70, and 80 wt.%)/Te@NiS nanocomposites (NCs), fabricated through a hydrothermal route. XRD and FTIR spectroscopic techniques demonstrated the successful synthesis of NPs and NCs. SEM-EDX images confirmed the flakelike structure and elemental constituents of the fabricated materials. Tauc plots were drawn, to calculate the band gaps of the synthesized samples. Te doping resulted in a significant reduction in the band gap of the NiS NPs. The photocatalytic efficiency of the NPs and NCs was investigated against MB, under sunlight. The results obtained for the photocatalytic activity, showed that 1%Te@NiS nanoparticles have an excellent dye degradation capacity in sunlight. This was made even better by making a series of SGCN/1% Te@NiS nanocomposites with different amounts of S-g-C[sub.3]N[sub.4]. When compared to NiS, Te@NiS, SGCN, and 70%SGCN/1%Te@NiS, the 70%SGCN/1%Te@NiS NCs have excellent antifungal ability. The higher impact of SGCN/Te@NiS, may be due to its enhanced ability to disperse and interact with the membranes and intracellular proteins of fungi. The 70%SGCN/1%Te@NiS NCs showed excellent antibacterial and photocatalytic efficiency. Thus, the 70%SGCN/1%Te@NiS NCs might prove fruitful in antibacterial and photocatalytic applications.
Journal Article
Nanomaterials in the environment: Behavior, fate, bioavailability, and effects
The recent advances in nanotechnology and the corresponding increase in the use of nanomaterials in products in every sector of society have resulted in uncertainties regarding environmental impacts. The objectives of this review are to introduce the key aspects pertaining to nanomaterials in the environment and to discuss what is known concerning their fate, behavior, disposition, and toxicity, with a particular focus on those that make up manufactured nanomaterials. This review critiques existing nanomaterial research in freshwater, marine, and soil environments. It illustrates the paucity of existing research and demonstrates the need for additional research. Environmental scientists are encouraged to base this research on existing studies on colloidal behavior and toxicology. The need for standard reference and testing materials as well as methodology for suspension preparation and testing is also discussed.
Journal Article
Environmental Health Risks and Housing Values: Evidence from 1,600 Toxic Plant Openings and Closings
Regulatory oversight of toxic emissions from industrial plants and understanding about these emissions ' impacts are in their infancy. Applying a research design based on the openings and closings of 1,600 industrial plants to rich data on housing markets and infant health, we find that: toxic air emissions affect air quality only within 1 mile of the plant; plant openings lead to 11 percent declines in housing values within 0.5 mile or a loss of about $ 4.25 million for these households; and a plant's operation is associated with a roughly 3 percent increase in the probability of low birthweight within 1 mile.
Journal Article