Explore the vast range of titles available.

We recently developed a database for hexaploid wheat QTL (WheatQTLdb; www.wheatqtldb.net ), which included 11,552 QTL affecting various traits of economic importance. However, that database did not include valuable QTL from other wheat species and/or progenitors of hexaploid wheat. Therefore, an updated and improved version of wheat QTL database (WheatQTLdb V2.0) was developed, which now includes information on hexaploid wheat ( Triticum aestivum ) and the following seven other related species: T. durum , T. turgidum , T. dicoccoides , T. dicoccum , T. monococcum , T. boeoticum , and Aegilops tauschii . WheatQTLdb V2.0 includes a much-improved list of QTL, including 27,518 main effect QTL, 202 epistatic QTL, and 1321 metaQTL. This newly released WheatQTLdb V2.0 also has additional valuable options to search and choose the QTL, category-wise, and trait-wise data for their use in research or breeding programs.

Rice yield is a complex quantitative trait. Although a lot of genes for yield have been cloned, their genetic basis remains unknown. In the present study, a set of chromosome segment substitution line population (CSSL) was developed, derived from the indica variety Huanghuazhan as the recipient parent and the Aus variety N22 as the donor parent, and a high-density bin map containing 609 bins was constructed by resequencing. The CSSL population comprised 155 families with an average background recovery rate of 93.02%. Nine yield-related traits, including plant height, panicle number, panicle length, primary branch number, spikelet number per panicle, grain number per panicle, seed setting rate, 1000-grain weight, and grain yield per plant, were evaluated across four environments. The results showed significant differences in yield-related traits between the two parents across four environments. All nine traits showed continuous distribution with transgressive segregation. Spikelet number per panicle, grain number per panicle and 1000-grain weight showed strong correlations with each other, whereas panicle number had weak correlations with them. A total of 80 main-effect quantitative trait loci (QTLs) affecting yield-related traits were identified, among which 13 QTLs were repeatedly detected in multiple environments, 45 QTLs were located in 8 pleiotropic QTL regions, and 47 QTLs showed significant interactions with environments. In addition, 260 pairs of epistatic QTLs underlying yield-related traits were identified, of which 2 pairs stably expressed across different environments, and 11 pairs controlled more than two traits. These findings provide a theoretical basis for clarifying the genetic differentiation between indica and Aus and cloning yield-related genes, and offer valuable gene resources for molecular breeding of high-yield rice varieties.

Background Terminal drought stress leads to substantial annual yield losses in chickpea (Cicer arietinum L.). Adaptation to water limitation is a matter of matching water supply to water demand by the crop. Therefore, harnessing the genetics of traits contributing to plant water use, i.e. transpiration rate and canopy development dynamics, is important to design crop ideotypes suited to a varying range of water limited environments. With an aim of identifying genomic regions for plant vigour (growth and canopy size) and canopy conductance traits, 232 recombinant inbred lines derived from a cross between ICC 4958 and ICC 1882, were phenotyped at vegetative stage under well-watered conditions using a high throughput phenotyping platform (LeasyScan). Results Twenty one major quantitative trait loci (M-QTLs) were identified for plant vigour and canopy conductance traits using an ultra-high density bin map. Plant vigour traits had 13 M-QTLs on CaLG04, with favourable alleles from high vigour parent ICC 4958. Most of them co-mapped with a previously fine mapped major drought tolerance “QTL-hotspot” region on CaLG04. One M-QTL was found for canopy conductance on CaLG03 with the ultra-high density bin map. Comparative analysis of the QTLs found across different density genetic maps revealed that QTL size reduced considerably and % of phenotypic variation increased as marker density increased. Conclusion Earlier reported drought tolerance hotspot is a vigour locus. The fact that canopy conductance traits, i.e. the other important determinant of plant water use, mapped on CaLG03 provides an opportunity to manipulate these loci to tailor recombinants having low/high transpiration rate and plant vigour, fitted to specific drought stress scenarios in chickpea.

That root system architecture (RSA) has an essential role in nitrogen acquisition is expected in maize, but the genetic relationship between RSA and nitrogen use efficiency (NUE) traits remains to be elucidated. Here, the genetic basis of RSA and NUE traits was investigated in maize using a recombination inbred line population that was derived from two lines contrasted for both traits. Under high-nitrogen and low-nitrogen conditions, 10 NUE- and 9 RSA-related traits were evaluated in four field environments and three hydroponic experiments, respectively. In contrast to nitrogen utilization efficiency (NutE), nitrogen uptake efficiency (NupE) had significant phenotypic correlations with RSA, particularly the traits of seminal roots (r = 0.15–0.31) and crown roots (r = 0.15–0.18). A total of 331 quantitative trait loci (QTLs) were detected, including 184 and 147 QTLs for NUE- and RSA-related traits, respectively. These QTLs were assigned into 64 distinct QTL clusters, and ∼70% of QTLs for nitrogen-efficiency (NUE, NupE, and NutE) coincided in clusters with those for RSA. Five important QTLs clusters at the chromosomal regions bin1.04, 2.04, 3.04, 3.05/3.06, and 6.07/6.08 were found in which QTLs for both traits had favourable effects from alleles coming from the large-rooted and high-NupE parent. Introgression of these QTL clusters in the advanced backcross-derived lines conferred mean increases in grain yield of ∼14.8% for the line per se and ∼15.9% in the testcross. These results reveal a significant genetic relationship between RSA and NUE traits, and uncover the most promising genomic regions for marker-assisted selection of RSA to improve NUE in maize.

The subspecies fastigiata of cultivated groundnut lost fresh seed dormancy (FSD) during domestication and human‐made selection. Groundnut varieties lacking FSD experience precocious seed germination during harvest imposing severe losses. Development of easy‐to‐use genetic markers enables early‐generation selection in different molecular breeding approaches. In this context, one recombinant inbred lines (RIL) population (ICGV 00350 × ICGV 97045) segregating for FSD was used for deploying QTL‐seq approach for identification of key genomic regions and candidate genes. Whole‐genome sequencing (WGS) data (87.93 Gbp) were generated and analysed for the dormant parent (ICGV 97045) and two DNA pools (dormant and nondormant). After analysis of resequenced data from the pooled samples with dormant parent (reference genome), we calculated delta‐SNP index and identified a total of 10,759 genomewide high‐confidence SNPs. Two candidate genomic regions spanning 2.4 Mb and 0.74 Mb on the B05 and A09 pseudomolecules, respectively, were identified controlling FSD. Two candidate genes—RING‐H2 finger protein and zeaxanthin epoxidase—were identified in these two regions, which significantly express during seed development and control abscisic acid (ABA) accumulation. QTL‐seq study presented here laid out development of a marker, GMFSD1, which was validated on a diverse panel and could be used in molecular breeding to improve dormancy in groundnut.

IntroductionOwing to advances in high-throughput genome sequencing, QTL-Seq mapping of salt tolerance traits is a major platform for identifying soil-salinity tolerance QTLs to accelerate marker-assisted selection for salt-tolerant rice varieties. We performed QTL-BSA-Seq in the seedling stage of rice from a genetic cross of the extreme salt-sensitive variety, IR29, and “Jao Khao” (JK), a Thai salt-tolerant variety.MethodsA total of 462 F2 progeny grown in soil and treated with 160 mM NaCl were used as the QTL mapping population. Two high- and low-bulk sets, based on cell membrane stability (CMS) and tiller number at the recovery stage (TN), were equally sampled. The genomes of each pool were sequenced, and statistical significance of QTL was calculated using QTLseq and G prime (G′) analysis, which is based on calculating the allele frequency differences or Δ(SNP index).ResultsBoth methods detected the overlapping interval region, wherein CMS-bulk was mapped at two loci in the 38.41–38.85 Mb region with 336 SNPs on chromosome 1 ( qCMS1 ) and the 26.13–26.80 Mb region with 1,011 SNPs on chromosome 3 ( qCMS3 ); the Δ(SNP index) peaks were −0.2709 and 0.3127, respectively. TN-bulk was mapped at only one locus in the overlapping 38.26–38.95 Mb region on chromosome 1 with 575 SNPs ( qTN1 ) and a Δ(SNP index) peak of −0.3544. These identified QTLs in two different genetic backgrounds of segregating populations derived from JK were validated. The results confirmed the colocalization of the qCMS1 and qTN1 traits on chromosome 1. Based on the CMS trait, qCMS1/qTN1 stably expressed 6%–18% of the phenotypic variance in the two validation populations, while qCMS1/qTN1 accounted for 16%–20% of the phenotypic variance in one validation population based on the TN trait.ConclusionThe findings confirm that the CMS and TN traits are tightly linked to the long arm of chromosome 1 rather than to chromosome 3. The validated qCMS-TN1 QTL can be used for gene/QTL pyramiding in marker-assisted selection to expedite breeding for salt resistance in rice at the seedling stage.

Summary Peanut (Arachis hypogaea. L) is an important oil crop worldwide. The common testa colours of peanut varieties are pink or red. But the peanut varieties with dark purple testa have been focused in recent years due to the potential high levels of anthocyanin, an added nutritional value of antioxidant. However, the genetic mechanism regulating testa colour of peanut is unknown. In this study, we found that the purple testa was decided by the female parent and controlled by a single major gene named AhTc1. To identify the candidate gene controlling peanut purple testa, whole‐genome resequencing‐based approach (QTL‐seq) was applied, and a total of 260.9 Gb of data were generated from the parental and bulked lines. SNP index analysis indicated that AhTc1 located in a 4.7 Mb region in chromosome A10, which was confirmed by bulked segregant RNA sequencing (BSR) analysis in three segregation populations derived from the crosses between pink and purple testa varieties. Allele‐specific markers were developed and demonstrated that the marker pTesta1089 was closely linked with purple testa. Further, AhTc1 encoding a R2R3‐MYB gene was positional cloned. The expression of AhTc1 was significantly up‐regulated in the purple testa parent YH29. Overexpression of AhTc1 in transgenic tobacco plants led to purple colour of leaves, flowers, pods and seeds. In conclusion, AhTc1, encoding a R2R3‐MYB transcription factor and conferring peanut purple testa, was identified, which will be useful for peanut molecular breeding selection for cultivars with purple testa colour for potential increased nutritional value to consumers.

Rust and late leaf spot (LLS) are the two major foliar fungal diseases in groundnut, and their co-occurrence leads to significant yield loss in addition to the deterioration of fodder quality. To identify candidate genomic regions controlling resistance to rust and LLS, whole-genome resequencing (WGRS)-based approach referred as ‘QTL-seq’ was deployed. A total of 231.67 Gb raw and 192.10 Gb of clean sequence data were generated through WGRS of resistant parent and the resistant and susceptible bulks for rust and LLS. Sequence analysis of bulks for rust and LLS with reference-guided resistant parent assembly identified 3136 single-nucleotide polymorphisms (SNPs) for rust and 66 SNPs for LLS with the read depth of ≥7 in the identified genomic region on pseudomolecule A03. Detailed analysis identified 30 nonsynonymous SNPs affecting 25 candidate genes for rust resistance, while 14 intronic and three synonymous SNPs affecting nine candidate genes for LLS resistance. Subsequently, allele-specific diagnostic markers were identified for three SNPs for rust resistance and one SNP for LLS resistance. Genotyping of one RIL population (TAG 24 × GPBD 4) with these four diagnostic markers revealed higher phenotypic variation for these two diseases. These results suggest usefulness of QTL-seq approach in precise and rapid identification of candidate genomic regions and development of diagnostic markers for breeding applications.

Seed size and shape are important traits determining yield and quality in soybean. However, the genetic mechanism and genes underlying these traits remain largely unexplored. In this regard, this study used two related recombinant inbred line (RIL) populations (ZY and K3N) evaluated in multiple environments to identify main and epistatic-effect quantitative trait loci (QTLs) for six seed size and shape traits in soybean. A total of 88 and 48 QTLs were detected through composite interval mapping (CIM) and mixed-model-based composite interval mapping (MCIM), respectively, and 15 QTLs were common among both methods; two of them were major (R2 > 10%) and novel QTLs (viz., qSW-1-1ZN and qSLT-20-1K3N). Additionally, 51 and 27 QTLs were identified for the first time through CIM and MCIM methods, respectively. Colocalization of QTLs occurred in four major QTL hotspots/clusters, viz., “QTL Hotspot A”, “QTL Hotspot B”, “QTL Hotspot C”, and “QTL Hotspot D” located on Chr06, Chr10, Chr13, and Chr20, respectively. Based on gene annotation, gene ontology (GO) enrichment, and RNA-Seq analysis, 23 genes within four “QTL Hotspots” were predicted as possible candidates, regulating soybean seed size and shape. Network analyses demonstrated that 15 QTLs showed significant additive x environment (AE) effects, and 16 pairs of QTLs showing epistatic effects were also detected. However, except three epistatic QTLs, viz., qSL-13-3ZY, qSL-13-4ZY, and qSW-13-4ZY, all the remaining QTLs depicted no main effects. Hence, the present study is a detailed and comprehensive investigation uncovering the genetic basis of seed size and shape in soybeans. The use of a high-density map identified new genomic regions providing valuable information and could be the primary target for further fine mapping, candidate gene identification, and marker-assisted breeding (MAB).

During the last three decades, QTL analysis in wheat has been conducted for a variety of individual traits, so that thousands of QTL along with the linked markers, their genetic positions and contribution to phenotypic variation (PV) for concerned traits are now known. However, no exhaustive database for wheat QTL is currently available at a single platform. Therefore, the present database was prepared which is an exhaustive information resource for wheat QTL data from the published literature till May, 2020. QTL data from both interval mapping and genome-wide association studies (GWAS) have been included for the following classes of traits: (i) morphological traits, (ii) N and P use efficiency, (iii) traits for biofortification (Fe, K, Se, and Zn contents), (iv) tolerance to abiotic stresses including drought, water logging, heat stress, pre-harvest sprouting and salinity, (v) resistance to biotic stresses including those due to bacterial, fungal, nematode and insects, (vi) quality traits, and (vii) a variety of physiological traits, (viii) developmental traits, and (ix) yield and its related traits. For the preparation of the database, literature was searched for data on QTL/marker-trait associations (MTAs), curated and then assembled in the form of WheatQTLdb. The available information on metaQTL, epistatic QTL and candidate genes, wherever available, is also included in the database. Information on QTL in this WheatQTLdb includes QTL names, traits, associated markers, parental genotypes, crosses/mapping populations, association mapping panels and other useful information. To our knowledge, WheatQTLdb prepared by us is the largest collection of QTL (11,552), epistatic QTL (107) and metaQTL (330) data for hexaploid wheat to be used by geneticists and plant breeders for further studies involving fine mapping, cloning, and marker-assisted selection (MAS) during wheat breeding.