Explore the vast range of titles available.

This paper presents a passive cavity type Ultra High Frequency (UHF) Radio Frequency Identification (RFID) tag antenna having the longest read-range, and compares it with existing long-range UHF RFID tag antenna. The study also demonstrates mathematically and experimentally that our proposed longest-range UHF RFID cavity type tag antenna has a longer read-range than existing passive tag antennas. Our tag antenna was designed with 140 × 60 × 10 mm3 size, and reached 26 m measured read-range and 36.3 m mathematically calculated read-range. This UHF tag antenna can be applied to metal and non-metal objects. By adding a further sensing capability, it can have a great benefit for the Internet of Things (IoT) and wireless sensor networks (WSN).

In this paper, we describe a long-range convex cavity-type passive ultra-high-frequency (UHF) radio frequency identification (RFID) tag to use on various metal and non-metal surfaces, for IoT sensor energy harvesting. The tag antenna is built on the 3D printed cavity structure with polylactic acid (PLA) plastic and painted with the conductive ink on the 1 mm protruding area (convex) of inner surface and the side-walls of the cavity structure to form a cavity structure. The tag is designed to operate in the UHF band (840–960 MHz). This long-range cavity tag antenna (CTA) works at both 920 MHz and 915 MHz UHF RFID frequencies. It provides a linear polarized (LP) frontal reading range of 35 m and side reading range above 15 m when mounted on either metal or non-metal objects. We describe the antenna characteristics, structure, modeling, simulation, and experimental results. A mathematical reading range also was calculated and compared with experimental data.

A simple topology is described for radio frequency identification (RFID) tags mountable on metal surfaces. The tag is built around a commercial UHF RFID module combining an IC and a coupling loop. The module is placed in the neighbourhood of a slot which is used both to couple the energy from the module to the patch-like antenna and to miniaturise the tag. A read range of almost 4 m is obtained in the 865–868 MHz band with a 1.6 mm low-cost FR4 substrate.

Electronic license operating system is mainly including passive electronic license applications and information technology systems integration of physical construction ideas. This paper introduces a practical application of the anti-metal UHF RFID tag antenna, relying on the existing license plate, the metal plate as part of the antenna to solve UHF RFID tag for metal surface problems. Establishment of cloud computing, combining sea calculation the physical integration of information systems to meet the needs of car networking operations.

Purpose RFID tags for sensing are available to operate and transmit sensing data to measurement equipment without battery and wires, which is a great advantage in establishing IoT environment. For crack sensing tags, however, the short service life of tags restricted their application. This paper aims to introduce a method of surface crack detection and monitoring based on RFID tag, which makes it possible for tags to be reused. Design/methodology/approach Metal plate to be monitored, acting as the ground plane of microstrip patch antenna, is underneath the crack sensing tag. The propagating surface crack in metal plate will change the electric length of tag’s antenna that is directly proportional to the crack depth and length. Thus, the deformation of sensing tag introduced by the load on metal structure is no longer a prerequisite for crack sensing. Findings The simulated and experimental results show that the proposed crack sensing tag can sense the change of surface crack with mm-resolution and sense surface crack propagation without a deformation, which means the proposed crack sensing tag can be reused. Originality/value The key advantage of the proposed method is the reusability of the RFID tags.

Radio-frequency identification technology finds extensive use in various industrial applications, including those involving metallic surfaces. The integration of radio-frequency identification systems with metal surfaces, such as those found in the automotive sector, presents distinct challenges that can notably affect system efficacy due to metal’s tendency to reflect electromagnetic waves, thus degrading the functionality of conventional radio-frequency identification tags. This highlights the importance of conducting research into academic publications and patents to grasp the current advancements and challenges in this field, aiming to improve the applications of radio-frequency identification tags technology on metal. Consequently, this research undertakes a concise review of both the literature and patents exploring radio-frequency identification technology’s use for on-metal tags, utilizing resources like Google Scholar and Google Patents. The research categorized crucial aspects such as tag flexibility, operating frequency, and geographic origins of the research. Findings highlight China’s prominent role in contributing to metal-focused radio-frequency identification tag research, with a considerable volume of articles and patents. In particular, flexible tags and the Ultra-High Frequency range are dominant in both scholarly and patent documents, reflecting their significance in radio-frequency identification technology applications. The research underscores a vibrant area of development within radio-frequency identification technology, with continued innovation driven by specific industrial needs. Despite the noted advances, the presence of a significant percentage of no longer valid patents suggests substantial opportunities for further research and innovation in radio-frequency identification technology for on-metal applications, especially considering the demand for flexible tags and for solutions in systems that offer specialized characteristics or are tailored for specific uses.

We propose a flexible anti-metal radio frequency identification (RFID) tag antenna based on a high-conductivity graphene assembly film (HCGAF). The HCGAF has a conductivity of 1.82 × 106 S m−1, a sheet resistance of 25 mΩ and a thickness of 22 μm. The HCGAF is endowed with high conductivity comparable to metal materials and superb flexibility, which is suitable for making antennas for microwave frequencies. Through proper structural design, parameter optimization, semiautomatic manufacturing and experimental measurements, an HCGAF antenna could realize a realized gain of –7.3 dBi and a radiation efficiency of 80%, and the tag could achieve a 6.4 m read range at 915 MHz on a 20 × 20 cm2 flat copper plate. In the meantime, by utilizing flexible polyethylene (PE) foam, good conformality was obtained. The read ranges of the tags attached to curved copper plates with different bending radii were measured, as well as those of those attached to several daily objects. All the results demonstrate the excellent performance of the design, which is highly favorable for practical RFID anti-metal applications.

Structural health monitoring (SHM) technology is a monitoring process and early warning method for the health status or damage of special workpiece structures by deploying sensors. In recent years, there have been many studies on SHM, such as ultrasonic, pulsed eddy current, optical fiber, magnetic powder, and other nondestructive testing technologies. Due to their sensor deployment, testing environment, power supply, and transmission line wiring mechanism, they bring problems such as detection efficiency, long-term monitoring, and unreliable systems. The combination of wireless sensing technology and intelligent detection technology is used to solve the above problems. Therefore, this paper studies the tag antenna smart sensor, which is used to characterize the extension of metal defects in SHM. Then, it presents a wireless passive three-dimensional sensing antenna, and simulations verify the feasibility of the antenna. The simulation results show that the antenna can characterize the two extension directions of depth and width of the metal surface structure smooth defect. At the same time, the antenna can characterize the position of smooth defects on the surface of metal structures relative to the antenna and then realize the smooth defect positioning.

Being inches from the rapid development of new energy technology, the capacity of high-power power electronic equipment is increasing rapidly, and the requirements for its safe and reliable operation are also rising. As a result, the demand for online temperature monitoring of such equipment is becoming increasingly urgent. RFID temperature measurement technology can be used for real-time monitoring of the temperature of powered operation equipment. However, the operation of high-power electronic equipment generates strong electromagnetic interference, which can seriously affect the normal operation of RFID temperature measurement systems. For applications involving the internal temperature measurement of high-power power electronic equipment, this paper employs an RFID anti-metal temperature tag antenna with a short-circuit cutoff structure. This structure was tested in an excitation switchgear cabinet. During the low-power operation of the cabinet, the temperature tag functioned normally. By combining an RFID antenna model with an electromagnetic interference simulation model of the main circuit of the excitation switchgear cabinet, this paper establishes an electromagnetic interference simulation model for an RFID temperature tag. It analyzes how the tag’s antenna performance parameters change when subjected to interference. Through simulation, the failure mechanism of the RFID temperature tag during the high-power operation of the excitation switchgear cabinet is clarified. The analysis found that there are both conductive electromagnetic interference and radiated electromagnetic interference in the excitation switchgear cabinet, with the conductive electromagnetic interference having a more significant effect. Conductive electromagnetic interference can seriously impact the performance of RFID temperature tags in the excitation switchgear cabinet, significantly degrading their performance. In contrast, the effect of radiated electromagnetic interference on the tags is relatively small. Therefore, this paper employs anti-metal RFID temperature tags and simulates and analyzes their electromagnetic interference characteristics.

In this paper layout of long detection range radio frequency identification tag antenna mountable on metallic surface is presented. This tag antenna layout consists of two non-connected L-shaped load bars and two sectorial patches electrically connected through seven pairs of vias and conducting rear-plane to form a loop antenna. This proposed tag antenna can be tuned in wide range for impedance matching and introduces circular polarization. The tag antenna characteristics are also measured on metal plate. The results show that maximum detection range of the specimen, placed on metallic plate found to be 8.4 ms. The measured 10 dB bandwidth of circular tag antenna is 17 MHz (906–923 MHz) with simulated 3 dB axial ratio bandwidth of 13 MHz. This circular tag antenna is simulated with 4 W EIRP reader.