Explore the vast range of titles available.

Rammed-earth dwellings have a long history in the construction field. It is a natural material that is both green and environmentally friendly. In recent years, the advantages of rammed earth, such as environmental protection, low cost, and recyclability, have attracted considerable attention. In this study, the thermal and humidity physical properties of rammed–earth materials in the northwest Sichuan region, the variation laws of thermal physical parameters, such as the thermal conductivity of rammed–earth under different moisture content conditions, and isothermal moisture absorption and desorption curves were investigated. The results indicated that the thermal physical parameters of the rammed earth measured in the experiment increased with an increase in moisture content, and its moisture absorption performance was better than the moisture release performance in the range of 11.31–97.3% relative humidity. The experimental site, Mianyang City, Sichuan Province, is a subtropical monsoon humid climate zone characterized by warm winters and hot summers with four distinct seasons. In this study, we investigated the hygrothermal coupling transfer of walls, as well as the indoor temperature and humidity changes in new rammed–earth buildings during summer and winter climates. During the test period, the maximum indoor temperature in summer was 35.08 °C, the minimum temperature was 33.76 °C, and the average daily temperature fluctuation was 3.62 °C. In winter, the maximum indoor temperature was 8.59 °C, the minimum temperature was 6.18 °C, and the average daily temperature fluctuation was 1.21 °C. An analysis was performed on the thermal insulation performance of rammed–earth buildings in an extremely high-temperature climate during summer, thermal insulation performance, the thermal–buffering capacity of walls in a low–temperature and high-humidity climate during winter, and thermal and humidity regulation of indoor environments provided by walls during summer and winter. The results showed that the rammed–earth buildings exhibited warmth in winter, coolness in summer, and a more stable and comfortable indoor environment.

The paper presents an experimental program aiming at assessing the mechanical performance of rammed earth walls, namely under compression and shear loading. Axial compression and diagonal compression tests were carried out for this purpose, which allowed determining important mechanical parameters, such as compressive strength, Young’s modulus, Poisson’s ratio, shear strength and shear modulus. Furthermore, it allowed assessing the level of non-linear behaviour of the respective stress–strain relationships as well as the failure modes. The experimental results were then used in the calibration of numerical models (finite element method) for simulating the non-linear behaviour of rammed earth under shear loading. Both macro- and micro modelling approaches were considered for this purpose. The total strain rotating crack model was used to simulate the behaviour of the rammed earth material, while the Mohr–Coulomb failure criterion was used to simulate the behaviour of interfaces between layers. In general, the numerical models achieved good agreement with the experimental results, but uncertainties related to the definition of the input parameters required to perform a sensitivity analysis. The compressive strength, the Poisson’s ratio, the tensile strength and the tensile fracture energy revealed to be the most important parameters in the analyses.

Waterproof capacity, thermal isolation, and pushover strength are the main characteristics when an unstabilized rammed earth (URE) wall is constructed. In this paper, a comprehensive numerical simulation model is built to evaluate the effect of 15 different factors on those three aforementioned properties of URE walls. The simulation results show that the hydraulic, thermal, and mechanical properties of the wall are interconnected. It is found that the waterproof capacity of the wall can be mainly improved by increasing the dry density, decreasing the rising damp effect, and reducing the fine content value of the wall. The thermal insulation characteristic of the wall can be ameliorated by increasing the wall thickness and reducing the rising damp effect, fine content, and dry density. In addition, the pushover capacity of the wall can be strengthened by increasing the wall width, fine content, wall thickness, and vertical load and decreasing the rising dampness and wall height. In addition, time has a positive effect on the waterproof capacity, thermal insulation, and mechanical strength of URE walls. These properties change significantly in the first 100 days and then stabilize after 180 days for a typical URE wall. Eventually, a new theoretical approach is proposed to predict the long-term THM behavior of URE walls by considering the 15 factors in its framework.

Fujian earth-buildings have much attention of the world for their protection since they have became the world heritage in 2008,and have do various building protection research, but the research of rammed-earth material strength nondestructive testing has not began. Through the research of working principle of the rebound hammer and rammed-earth material mechanical properties, increasing the end of the rod to improve the detection precision. Consult the method of building the testing strength curve for concrete to build testing strength curve of rammed-earth material, lays a foundation of field detection for the earth-building in service, contribute to improve protection measures.

This study aims to check the compatibility of a selection of waste and recycled biopolymers for rammed earth applications in order to replace the more common cement-based stabilization. Five formulations of stabilized rammed earth were prepared with different biopolymers: lignin sulfonate, tannin, sheep wool fibers, citrus pomace and grape-seed flour. The microstructure of the different formulations was characterized by investigating the interactions between earth and stabilizers through mercury intrusion porosimetry (MIP), nitrogen soprtion isotherm, powder X-ray diffraction (XRD) and scanning electron microscopy (SEM). The unconfined compressive strength (UCS) was also evaluated for all stabilized specimens. Three out of five biopolymers were considered suitable as rammed earth stabilizers. The use of wool increased the UCS by 6%, probably thanks to the combined effect of the length of the fibers and the roughness of their surfaces, which gives a contribution in binding clay particles higher than citrus and grape-seed flour. Lignin sulfonate and tannin increased the UCS by 38% and 13%, respectively, suggesting the additives’ ability to fill pores, coat soil grains and form aggregates; this capability is confirmed by the reduction in the specific surface area and the pore volume in the nano- and micropore zones.

Cement-stabilized rammed earth (CSRE) is a sustainable construction material. The use of it allows for economizing on the cost of a structure. These two properties of CSRE are based on the fact that the soil used for the rammed mixture is usually dug close to the construction site, so it has random characteristics. That is the reason for the lack of widely accepted prescriptions for CSRE mixture, which could ascertain high enough compressive strength. Therefore, assessing which components of CSRE have the highest impact on its compressive strength becomes an important issue. There are three machine learning regression tools, i.e., artificial neural networks, decision tree, and random forest, used for predicting the compressive strength based on the relative content of CSRE composites (clay, silt, sand, gravel, cement, and water content). The database consisted of 434 samples of CSRE, which were prepared and crushed for testing purposes. Relatively low prediction errors of aforementioned models allowed for the use of explainable artificial intelligence tools (drop-out loss, mean squared error reduction, accumulated local effect) to rank the influence of the ingredients on the dependent variable—the compressive strength. Consistent results from all above-mentioned methods are discussed and compared to some statistical analysis of selected features. This innovative approach, helpful in designing the construction material is a solid base for reliable conclusions.

Cement stabilized rammed earth (CRSE) is a sustainable, low energy consuming construction technique which utilizes inorganic soil, usually taken directly from the construction site, with a small addition of Portland cement as a building material. This technology is gaining popularity in various regions of the world, however, there are no uniform standards for designing the composition of the CSRE mixture. The main goal of this article is to propose a complete algorithm for designing CSRE with the use of subsoil obtained from the construction site. The article’s authors propose the use of artificial neural networks (ANN) to determine the proper proportions of soil, cement, and water in a CSRE mixture that provides sufficient compressive strength. The secondary purpose of the paper (supporting the main goal) is to prove that artificial neural networks are suitable for designing CSRE mixtures. For this purpose, compressive strength was tested on several hundred CSRE samples, with different particle sizes, cement content and water additions. The input database was large enough to enable the artificial neural network to produce predictions of high accuracy. The developed algorithm allows us to determine, using relatively simple soil tests, the composition of the mixture ensuring compressive strength at a level that allows the use of this material in construction.

Current rammed earth in situ practices face economic challenges that outweigh its ecological advantages, rendering it a niche product in the construction sector. This is mainly due to the inefficient and labor-intensive character of the manual construction processes involved, especially those related to formwork. The introduction of automated and robotic fabrication presents an opportunity to reduce the existing imbalance through digitalization, by shortening the building time and reducing labor input. In this paper, the associated potential environmental impacts of manual and robotic in situ manufacture of unstabilized rammed earth walls are compared and quantified in a life cycle assessment. The results show that robotic in situ manufacture is the more environmentally favorable option within the construction phase, with the highest optimization potential in the building phase. The standard robotic scenario demonstrates significant reductions across a range of environmental impact indicators of approx. 9–97% compared to the standard manual scenario due to a reduction of waste and formwork. Specifically, the GWP100-total is reduced by 28% and EE by 68%. Further key factor optimizations—including minimizing transport distances, using locally sourced loam, reducing packaging materials, and utilizing renewable energy—show even greater benefits. In the robotic procedure, this result in reductions in GWP100-total of 76% and EE of 70% compared to its robotic standard scenario, and to reductions of 83% and 90%, respectively, compared to the standard manual procedure.

Cemented stabilized rammed earth (CSRE) is a building material used to build load bearing walls from locally available soil. The article analyzes the influence of soil mineral composition on CSRE compressive strength. Compression tests of CSRE samples of various mineral compositions, but the same particle size distribution, water content, and cement content were conducted. Based on the compression strength results and analyzed SEM images, it was observed that even small changes in the mineral composition significantly affected the CSRE compressive strength. From the comparison of CSRE compressive strength result sets, one can draw general qualitative conclusions that montmorillonite lowered the compressive strength the most; beidellite also lowered it, but to a lesser extent. Kaolinite lightly increased the compressive strength.

This case study focuses on twelve compacted clay soil samples to understand their fundamental physical and thermal properties. For each sample, the density, thermal conductivity, thermal diffusivity, specific heat, and drying shrinkage were assessed. The identification and characterisation of the materials were also carried out by positioning them into the ternary diagram based on the percentage of sand, silt, and clay. These properties are definitive for the performance characteristics of materials used in rammed earth wall construction. The aim is to provide information for better knowledge and prediction regarding the dynamic heat flow in rammed earth walls. Experimental results show a relatively wide range of values for each property, reflecting the diverse properties of the sampled clays. The thermophysical characteristics of the 12 types of earth analysed showed correlations with reports in the literature in terms of density (1490–2150 kg/m3), porosity (23.22–39.99%), specific heat capacity (701–999 J/kgK), and thermal conductivity (0.523–1.209 W/mK), which indicates them as materials suitable for use in the construction of rammed earth walls. Using test data, a dynamic assessment of heat flow through simulated rammed earth walls was performed. For a better understanding of the results obtained, they were compared with results obtained for simulations where the building element would be made of concrete, i.e., a mineral wool core composite. Thus, heat flux at the wall surface and mass flux, respectively, during the 16 years of operation showed similar evolution for all 12 types of clay material analysed, with small variations explained by differences in thermophysical characteristics specific to each type of S1–S12 earth. In the case of walls made from clay material, there is a stabilisation in the evolution of the water content phenomenon by the 5th year of simulation. This contrasts with walls made of concrete, where the characteristic water content appears to evolve continuously over the 16-year period. Therefore, it can be said that in the case of the construction elements of existing buildings, which have already gone through a sufficient period for the maturation of the materials in their construction elements, the rammed earth wall quickly develops a moisture buffer function. In the case of simulating a mineral wool core composite wall, it cannot perform as a temperature or humidity buffer, exhibiting an enthalpy exchange with indoor air that is only 4% of that of the rammed earth walls; consequently, it does not play a significant role in regulating indoor comfort conditions. Overall, there is confirmation of the temperature and moisture buffering capabilities of rammed earth walls during both warm and cold periods of the year, which is consistent with other reports in the literature. The findings of this research provide a better insight into clay as a material for rammed earth walls for more efficient design and construction, offering potential improvements regarding indoor comfort, energy efficiency, and sustainability. The data also provides useful information in the fields of architecture and civil engineering regarding the use of clay as an eco-friendly building material. The results emphasise the importance of thoroughly understanding the thermophysical properties of clay to ensure the efficiency of rammed earth construction.