Explore the vast range of titles available.

The linear production and consumption of plastics today is unsustainable. It creates large amounts of unnecessary and mismanaged waste, pollution and carbon dioxide emissions, undermining global climate targets and the Sustainable Development Goals. This Perspective provides an integrated technological, economic and legal view on how to deliver a circular carbon and plastics economy that minimizes carbon dioxide emissions. Different pathways that maximize recirculation of carbon (dioxide) between plastics waste and feedstocks are outlined, including mechanical, chemical and biological recycling, and those involving the use of biomass and carbon dioxide. Four future scenarios are described, only one of which achieves sufficient greenhouse gas savings in line with global climate targets. Such a bold system change requires 50% reduction in future plastic demand, complete phase-out of fossil-derived plastics, 95% recycling rates of retrievable plastics and use of renewable energy. It is hard to overstate the challenge of achieving this goal. We therefore present a roadmap outlining the scale and timing of the economic and legal interventions that could possibly support this. Assessing the service lifespan and recoverability of plastic products, along with considerations of sufficiency and smart design, can moreover provide design principles to guide future manufacturing, use and disposal of plastics. Four future greenhouse gas emission scenarios for the global plastics system are investigated, with the lead scenario achieving net-zero emissions, and a series of  technical, legal and economic interventions recommended.

Environmental contamination due to solid waste mismanagement is a global issue. Open dumping and open burning are the main implemented waste treatment and final disposal systems, mainly visible in low-income countries. This paper reviews the main impacts due to waste mismanagement in developing countries, focusing on environmental contamination and social issues. The activity of the informal sector in developing cities was also reviewed, focusing on the main health risks due to waste scavenging. Results reported that the environmental impacts are pervasive worldwide: marine litter, air, soil and water contamination, and the direct interaction of waste pickers with hazardous waste are the most important issues. Many reviews were published in the scientific literature about specific waste streams, in order to quantify its effect on the environment. This narrative literature review assessed global issues due to different waste fractions showing how several sources of pollution are affecting the environment, population health, and sustainable development. The results and case studies presented can be of reference for scholars and stakeholders for quantifying the comprehensive impacts and for planning integrated solid waste collection and treatment systems, for improving sustainability at a global level.

Researchers are studying how more-sophisticated policies, smarter recycling and new materials could stem the tide of waste. Researchers are studying how more-sophisticated policies, smarter recycling and new materials could stem the tide of waste.

All disciplines should follow the geosciences and demand best practice for publishing and sharing data, argue Shelley Stall and colleagues. All disciplines should follow the geosciences and demand best practice for publishing and sharing data, argue Shelley Stall and colleagues. Researchers repairs a broken GPS module at a research station in Greenland

An alternative material to activated carbon for water remediation is reported: a porous material based on crosslinked cyclodextrins that is better than activated carbons at adsorbing a range of pharmaceuticals, pesticides and other anthropogenic pollutants. Near-instant removal of organic micropollutants from water Water purification and remediation is often carried out using various forms of activated carbon; it is inexpensive, but only partially removes many organic pollutants. However, regenerating activated carbon for reuse is energy intensive, requiring high temperatures, and performance decreases upon recycling. Now William Dichtel, Damian Helbling and colleagues have developed an alternative to activated carbon for water remediation: a high-surface-area, mesoporous polymer of β-cyclodextrin. Not only does the material outperform activated carbons at adsorbing a range of pharmaceuticals, pesticides and other pollutants, but it is easily regenerated by washing at room temperature. The global occurrence in water resources of organic micropollutants, such as pesticides and pharmaceuticals, has raised concerns about potential negative effects on aquatic ecosystems and human health 1 , 2 , 3 , 4 , 5 . Activated carbons are the most widespread adsorbent materials used to remove organic pollutants from water but they have several deficiencies, including slow pollutant uptake (of the order of hours) 6 , 7 and poor removal of many relatively hydrophilic micropollutants 8 . Furthermore, regenerating spent activated carbon is energy intensive (requiring heating to 500–900 degrees Celsius) and does not fully restore performance 9 , 10 . Insoluble polymers of β-cyclodextrin, an inexpensive, sustainably produced macrocycle of glucose, are likewise of interest for removing micropollutants from water by means of adsorption 11 . β-cyclodextrin is known to encapsulate pollutants to form well-defined host–guest complexes, but until now cross-linked β-cyclodextrin polymers have had low surface areas and poor removal performance compared to conventional activated carbons 11 , 12 , 13 . Here we crosslink β-cyclodextrin with rigid aromatic groups, providing a high-surface-area, mesoporous polymer of β-cyclodextrin. It rapidly sequesters a variety of organic micropollutants with adsorption rate constants 15 to 200 times greater than those of activated carbons and non-porous β-cyclodextrin adsorbent materials 7 , 8 , 11 , 12 , 13 . In addition, the polymer can be regenerated several times using a mild washing procedure with no loss in performance. Finally, the polymer outperformed a leading activated carbon for the rapid removal of a complex mixture of organic micropollutants at environmentally relevant concentrations. These findings demonstrate the promise of porous cyclodextrin-based polymers for rapid, flow-through water treatment.

Turning cast-off shells into nitrogen-rich chemicals would benefit economies and the environment, say Ning Yan and Xi Chen.

The increasing use of electrical and electronic equipment leads to a huge generation of electronic waste (e-waste). It is the fastest growing waste stream in the world. Almost all electrical and electronic equipment contain printed circuit boards as an essential part. Improper handling of these electronic wastes could bring serious risk to human health and the environment. On the other hand, proper handling of this waste requires a sound management strategy for awareness, collection, recycling, and reuse. Nowadays, the effective recycling of this type of waste has been considered as a main challenge for any society. Printed circuit boards (PCBs), which are the base of many electronic industries, are rich in valuable heavy metals and toxic halogenated organic substances. In this review, the composition of different PCBs and their harmful effects are discussed. Various techniques in common use for recycling the most important metals from the metallic fractions of e-waste are illustrated. The recovery of metals from e-waste material after physical separation through pyrometallurgical, hydrometallurgical, or biohydrometallurgical routes is also discussed, along with alternative uses of non-metallic fraction. The data are explained and compared with the current e-waste management efforts done in Egypt. Future perspectives and challenges facing Egypt for proper e-waste recycling are also discussed.

Following the growth of the global population and the subsequent rapid increase in urbanization and industrialization, the fisheries and aquaculture production has seen a massive increase driven mainly by the development of fishing technologies. Accordingly, a remarkable increase in the amount of fish waste has been produced around the world; it has been estimated that about two-thirds of the total amount of fish is discarded as waste, creating huge economic and environmental concerns. For this reason, the disposal and recycling of these wastes has become a key issue to be resolved. With the growing attention of the circular economy, the exploitation of underused or discarded marine material can represent a sustainable strategy for the realization of a circular bioeconomy, with the production of materials with high added value. In this study, we underline the enormous role that fish waste can have in the socio-economic sector. This review presents the different compounds with high commercial value obtained by fish byproducts, including collagen, enzymes, and bioactive peptides, and lists their possible applications in different fields.

The extensive use of carbon fiber-reinforced plastics (CFRP) in aerospace, civil engineering, and other fields has resulted in a significant amount of waste, leading to serious environmental issues. Finding appropriate methods for recycling CFRP waste and effectively reusing recycled carbon fibers (rCFs) has become a challenging task. This paper presents an overview of the current status of CFRP waste and provides a systematic review and analysis of recycling technologies. In addition to discussing mechanical recycling, thermal decomposition, and chemical solvent degradation methods, the organic alkali/organic solvent method for recycling resins is also elucidated. By introducing the recycling conditions and outcomes of the organic alkali/organic solvent method, the study highlights its significance as a reference for carbon fiber recycling. Furthermore, the paper reviews the current state of rCFs utilization based on its application domains, focusing on research advancements in fiber composites and cementitious composites. Based on these findings, the paper summarizes the existing research limitations and identifies specific areas that require further attention in recycling techniques and rCFs utilization. Lastly, this review provides a prospect on the future of recycling and reusing CFRP waste.