Explore the vast range of titles available.

Glucose and xylose are the major components of lignocellulose. Effective utilization of both sugars can improve the efficiency of bioproduction. Here, we report a method termed parallel metabolic pathway engineering (PMPE) for producing shikimate pathway derivatives from glucose–xylose co-substrate. In this method, we seek to use glucose mainly for target chemical production, and xylose for supplying essential metabolites for cell growth. Glycolysis and the pentose phosphate pathway are completely separated from the tricarboxylic acid (TCA) cycle. To recover cell growth, we introduce a xylose catabolic pathway that directly flows into the TCA cycle. As a result, we can produce 4.09 g L −1 cis , cis -muconic acid using the PMPE Escherichia coli strain with high yield (0.31 g g −1 of glucose) and produce l -tyrosine with 64% of the theoretical yield. The PMPE strategy can contribute to the development of clean processes for producing various valuable chemicals from lignocellulosic resources. In lignocellulose biomass, microbes prefer consuming glucose over xylose, which affects target compound production. Here, the authors achieve simultaneous utilization of glucose and xylose for target chemical production and cell growth, respectively, and realize high-level production of shikimate pathway derivatives.

Engineering microbial consortia to express complex biosynthetic pathways efficiently for the production of valuable compounds is a promising approach for metabolic engineering and synthetic biology. Here, we report the design, optimization, and scale-up of an Escherichia coli - E. coli coculture that successfully overcomes fundamental microbial production limitations, such as high-level intermediate secretion and low-efficiency sugar mixture utilization. For the production of the important chemical cis , cis -muconic acid, we show that the coculture approach achieves a production yield of 0.35 g/g from a glucose/xylose mixture, which is significantly higher than reported in previous reports. By efficiently producing another compound, 4-hydroxybenzoic acid, we also demonstrate that the approach is generally applicable for biosynthesis of other important industrial products.

Writing artificial logic and dynamic function into complex cellular background to achieve desired phenotypes or improved outputs calls for the development of new genetic tools as well as their innovative use. In this study, we present a sensor-regulator and RNAi-based bifunctional dynamic control network that can provide simultaneous upregulation and downregulation of cellular metabolism for engineered biosynthesis. The promoter-regulator-mediated upregulation function and its transduced downregulation function through RNAi are systematically verified and characterized. We apply this dynamic control network to regulate the phosphoenolpyruvate metabolic node in Escherichia coli and achieve autonomous distribution of carbon flux between its native metabolism and the engineered muconic acid biosynthetic pathway. This allows muconic acid biosynthesis to reach 1.8 g L −1 . This study also suggests the circumstances where dynamic control approaches are likely to take effects. Engineering dynamic control can improve microbial production of target chemicals. Here, the authors design a sensor-regulator and RNAi based bifunctional dynamic control network that can simultaneously and independently turn up and down cellular metabolism for engineered muconic acid production in E. coli .

Advanced glycation end products (AGEs) are obtained intermediate from nonenzymatic reactions between reducing sugars and proteins, lipids, or nucleic acids and it’s associated with diabetic complications. Today, potassium sorbate (PS), sodium citrate (CIT) and sodium benzoate (SB) were widespread used as food preservatives that can easily enter biological matrices. Here, the interaction between glycosylation Bovine Serum Albumin (BSA) and food preservatives individually and combination of two and three was studied by biochemical and simulation analysis. The results revealed that an increase in absorption and fluorescent intensity in all treated groups. The most carbonyl and glycosylated compounds were observed in the treatment with PS and its combined groups with two preservatives. Treatment with three preservatives alone or combination caused a significant increase in red blood cell hemolysis and MDA level ( p  < 0.05). The results of the in vitro experiments were in line with the docking studies and the interaction of the compounds with albumin was observed in important subdomain of BSA that show the stability of the BSA-ligand complex. Simultaneous treatment and the combination of two or three food preservatives cause their synergistic effect in possible harm to the body. In addition, the molecular docking experiment suggests that Sodium Benzoate, Potassium Sorbate and Sodium Dihydrogen Citrate can interact with BSA.

A wide range of commercially relevant aromatic chemicals can be synthesized via the shikimic acid pathway. Thus, this pathway has been the target of diverse metabolic engineering strategies. In the present work, an optimized yeast strain for production of the shikimic acid pathway intermediate 3-dehydroshikimate (3-DHS) was generated, which is a precursor for the production of the valuable compounds cis, cis-muconic acid (CCM) and gallic acid (GA). Production of CCM requires the overexpression of the heterologous enzymes 3-DHS dehydratase AroZ, protocatechuic acid (PCA) decarboxylase AroY and catechol dioxygenase CatA. The activity of AroY limits the yield of the pathway. This repertoire of enzymes was expanded by a novel fungal decarboxylase. Introducing this enzyme into the pathway in the optimized strain, a titer of 1244 mg L-1 CCM could be achieved, yielding 31 mg g-1 glucose. This represents the highest yield of this compound reported in Saccharomyces cerevisiae to date. To demonstrate the applicability of the optimized strain for production of other compounds from 3-DHS, we overexpressed AroZ together with a mutant of a para-hydroxybenzoic acid hydroxylase with improved substrate specificity for PCA, PobAY385F. Thereby, we could demonstrate the production of GA for the first time in S. cerevisiae.

Background The ineffectiveness of treatments for infections caused by biofilm-producing pathogens and human carcinoma presents considerable challenges for global public health organizations. To tackle this issue, our study focused on exploring the potential of synthesizing new complexes of Co(II), Cu(II), Ni(II), and Zn(II) with sorbic acid to enhance its antibacterial, antibiofilm, and anticancer properties. Methods Four novel complexes were synthesized as solid phases by reacting sorbic acid with Co(II), Cu(II), Ni(II), and Zn(II). These complexes were characterized by various technique, including infrared spectra, UV–Visible spectroscopy, proton nuclear magnetic resonance (1H NMR), and thermal analysis techniques, including thermogravimetry (TG). Results The data acquired from all investigated chemical characterization methods confirmed the chemical structure of the sorbate metal complexes. These complexes exhibited antibacterial and antibiofilm properties against both Gram-positive and Gram-negative bacteria. Furthermore, these complexes enhanced the antibacterial effects of commonly used antibiotics, such as gentamicin and imipenem, with fractional inhibitory concentration (FIC) indices ≤ 0.5. Notably, the Cu(II) complex displayed the most potent antibacterial and antibiofilm activities, with minimum inhibitory concentration (MIC) values of 312.5 µg/mL and 625.0 µg/mL for Bacillus cereus and Escherichia coli , respectively. Additionally, in vitro assays using the methyl thiazolyl tetrazolium (MTT) method showed inhibitory effects on the growth of the human colon carcinoma cell line (HCT-116 cells) following treatment with the investigated metal complexes. The IC50 values for Co(II), Cu(II), Zn(II), and Ni(II) were 3230 µg/mL, 2110 µg/mL, 3730 µg/mL, and 2240 µg/mL, respectively. Conclusion Our findings offer potential for pharmaceutical companies to explore the development of novel combinations involving traditional antibiotics or anticancer drugs with sorbate copper complex.

Background cis , cis -Muconic acid is an important chemical that can be biosynthesized from simple substrates in engineered microorganisms. Recently, it has been shown that engineering microbial cocultures is an emerging and promising approach for biochemical production. In this study, we aim to explore the potential of the E. coli – E. coli coculture system to use a single renewable carbon source, glycerol, for the production of value-added product cis , cis -muconic acid. Results Two coculture engineering strategies were investigated. In the first strategy, an E. coli strain containing the complete biosynthesis pathway was co-cultivated with another E. coli strain containing only a heterologous intermediate-to-product biosynthetic pathway. In the second strategy, the upstream and downstream pathways were accommodated in two separate E. coli strains, each of which was dedicated to one portion of the biosynthesis process. Compared with the monoculture approach, both coculture engineering strategies improved the production significantly. Using a batch bioreactor, the engineered coculture achieved a 2 g/L muconic acid production with a yield of 0.1 g/g. Conclusions Our results demonstrate that coculture engineering is a viable option for producing muconic acid from glycerol. Moreover, microbial coculture systems are shown to have the potential for converting single carbon source to value-added products.

Plants and microbes share common metabolic pathways for producing a range of bioproducts that are potentially foundational to the future bioeconomy. However, in planta accumulation and microbial production of bioproducts have never been systematically compared on an economic basis to identify optimal routes of production. A detailed technoeconomic analysis of four exemplar compounds (4-hydroxybenzoic acid [4-HBA], catechol, muconic acid, and 2-pyrone-4,6-dicarboxylic acid [PDC]) is conducted with the highest reported yields and accumulation rates to identify economically advantaged platforms and breakeven targets for plants and microbes. The results indicate that in planta mass accumulation ranging from 0.1 to 0.3 dry weight % (dwt%) can achieve costs comparable to microbial routes operating at 40 to 55% of maximum theoretical yields. These yields and accumulation rates are sufficient to be cost competitive if the products are sold at market prices consistent with specialty chemicals ($20 to $50/kg). Prices consistent with commodity chemicals will require an order-of-magnitude-greater accumulation rate for plants and/or yields nearing theoretical maxima for microbial production platforms. This comparative analysis revealed that the demonstrated accumulation rates of 4-HBA (3.2 dwt%) and PDC (3.0 dwt%) in engineered plants vastly outperform microbial routes, even if microbial platforms were to reach theoretical maximum yields. Their recovery and sale as part of a lignocellulosic biorefinery could enable biofuel prices to be competitive with petroleum. Muconic acid and catechol, in contrast, are currently more attractive when produced microbially using a sugar feedstock. Ultimately, both platforms can play an important role in replacing fossil-derived products.

Benzene is a ubiquitous, volatile pollutant present at high concentrations in toxins (e.g. tobacco smoke) known to increase cardiovascular disease (CVD) risk. Despite its prevalence, the cardiovascular effects of benzene have rarely been studied. Hence, we examined whether exposure to benzene is associated with increased CVD risk. The effects of benzene exposure in mice were assessed by direct inhalation, while the effects of benzene exposure in humans was assessed in 210 individuals with mild to high CVD risk by measuring urinary levels of the benzene metabolite trans,trans-muconic acid (t,t-MA). Generalized linear models were used to assess the association between benzene exposure and CVD risk. Mice inhaling volatile benzene had significantly reduced levels of circulating angiogenic cells (Flk-1+/Sca-1+) as well as an increased levels of plasma low-density lipoprotein (LDL) compared with control mice breathing filtered air. In the human cohort, urinary levels of t,t-MA were inversely associated several populations of circulating angiogenic cells (CD31+/34+/45+, CD31+/34+/45+/AC133-, CD34+/45+/AC133+). Although t,t-MA was not associated with plasma markers of inflammation or thrombosis, t,t-MA levels were higher in smokers and in individuals with dyslipidemia. In smokers, t,t-MA levels were positively associated with urinary metabolites of nicotine (cotinine) and acrolein (3-hydroxymercapturic acid). Levels of t,t-MA were also associated with CVD risk as assessed using the Framingham Risk Score and this association was independent of smoking. Thus, benzene exposure is associated with increased CVD risk and deficits in circulating angiogenic cells in both smokers and non-smokers.

Boron doped carbon dots (B-CD) were synthesized by a one-step hydrothermal method using phenylboronic acid as the starting material. They have an average size of about 3.3 nm, with excitation/emission wavelength of 247/323 nm and a quantum yield of 12%. The B-CD is shown to be viable fluorescent probe for sorbate (PS) and vitamin B12 (VB12). The fluorescence (FL) of the B-CD is quenched in the presence of PS or VB12 mainly coming from inner filter effect (IFE), but Förster resonance energy transfer (FRET) from the B-CD (as a donor) to PS/VB12 (as an acceptor) cannot be excluded. The probe enables PS to be detected by fluorometry with a linear response in the 0.20–24 μM concentration range and a 6.1 nM detection limit (at 3σ/slope). For VB12, the data are 0.20–30 μM and 8.0 nM. Graphical abstract Boron doped carbon dots (B-CD) as a probe was prepared by phenylboronic acid as single starting material via one-step hydrothermal method, which has remarkable selectivity and high sensitivity for monitoring PS/VB12. The fluorescence quenching of B-CD by PS/VB12 mainly comes from inner filter effect.