Explore the vast range of titles available.

As international lunar exploration shifts from mainly understanding the Moon to equally prioritizing its utilization, the requirement for highly similar lunar regolith simulants has grown. Current simulants, produced mainly by mechanical crushing and sieving, reproduce mechanical properties but lack space-weathered microstructures. However, this absence results in significant discrepancies in critical properties such as thermal conductivity and adsorption–desorption behavior, which undermine the reliability of ground-based resource utilization tests. To address this issue, this paper proposes a new preparation method for lunar regolith simulants, which simulates the micrometeorite impact process by utilizing the instantaneous high temperature, pressure, and high-velocity impact generated from the detonation of high-energy explosives in a sealed container. Preliminary experiments confirm that the method produces agglutinates, glass spherules, and porous structures resembling those in lunar regolith. The thermal conductivity of the modified simulant decreases significantly, approaching that of lunar regolith. Further refinement of the process, supported by quantitative 3D characterization, will enable the production of even more similar simulants, providing a reliable material foundation for lunar exploration, in situ resource utilization, and lunar construction activities.

On the Moon, in the near infrared wavelength range, spectral diagnostic features such as the 1-μm and 2-μm absorption bands can be used to estimate abundances of the constituent minerals. However, there are several factors that can darken the overall spectrum and dampen the absorption bands. Namely, (1) space weathering, (2) grain size, (3) porosity, and (4) mineral darkening agents such as ilmenite have similar effects on the measured spectrum. This makes spectral unmixing on the Moon a particularly challenging task. Here, we try to model the influence of space weathering and mineral darkening agents and infer the uncertainties introduced by these factors using a Markov Chain Monte Carlo method. Laboratory and synthetic mixtures can successfully be characterized by this approach. We find that the abundance of ilmenite, plagioclase, clino-pyroxenes and olivine cannot be inferred accurately without additional knowledge for very mature spectra. The Bayesian approach to spectral unmixing enables us to include prior knowledge in the problem without imposing hard constraints. Other data sources, such as gamma-ray spectroscopy, can contribute valuable information about the elemental abundances. We here find that setting a prior on TiO2 and Al2O3 can mitigate many of the uncertainties, but large uncertainties still remain for dark mature lunar spectra. This illustrates that spectral unmixing on the Moon is an ill posed problem and that probabilistic methods are important tools that provide information about the uncertainties, that, in turn, help to interpret the results and their reliability.

The Origins, Spectral-Interpretation, Resource-Identification, Security and Regolith-Explorer (OSIRIS-REx) spacecraft supports all aspects of the mission science objectives, from extensive remote sensing at the asteroid Bennu, to sample collection and return to Earth. In general, the success of planetary missions requires the collection, return, and analysis of data, which in turn depends on the successful operation of instruments and the host spacecraft. In the case of OSIRIS-REx, a sample-return mission, the spacecraft must also support the acquisition, safe stowage, and return of the sample. The target asteroid is Bennu, a B-class near-Earth asteroid roughly 500 m diameter. The Lockheed Martin-designed and developed OSIRIS-REx spacecraft draws significant heritage from previous missions and features the Touch-and-Go-Sample-Acquisition-Mechanism, or TAGSAM, to collect sample from the surface of Bennu. Lockheed Martin developed TAGSAM as a novel, simple way to collect samples on planetary bodies. During short contact with the asteroid surface, TAGSAM releases curation-grade nitrogen gas, mobilizing the surface regolith into a collection chamber. The contact surface of TAGSAM includes “contact pads”, which are present to collect surface grains that have been subject to space weathering. Extensive 1-g laboratory testing, “reduced-gravity” testing (via parabolic flights on an airplane), and analysis demonstrate that TAGSAM will collect asteroid material in nominal conditions, and a variety of off-nominal conditions, such as the presence of large obstacles under the TAGSAM sampling head, or failure in the sampling gas firing. TAGSAM, and the spacecraft support of the instruments, are central to the success of the mission.

We report 491 new near-infrared spectroscopic measurements of 420 near-Earth objects (NEOs) collected on the NASA InfraRed Telescope Facility as part of the MIT-Hawaii NEO Spectroscopic Survey. These measurements were combined with previously published data from Binzel et al. and bias-corrected to derive the intrinsic compositional distribution of the overall NEO population, as well as of subpopulations coming from various escape routes (ERs) in the asteroid belt and beyond. The resulting distributions reflect well the overall compositional gradient of the asteroid belt, with decreasing fractions of silicate-rich (S- and Q-type) bodies and increasing fractions of carbonaceous (B-, C-, D- and P-type) bodies as a function of increasing ER distance from the Sun. The close compositional match between NEOs and their predicted source populations validates dynamical models used to identify ERs and argues against any strong composition change with size in the asteroid belt between ∼5 km and ∼100 m. A notable exception comes from the overabundance of D-type NEOs from the 5:2J and, to a lesser extend, the 3:1J and ν 6 ERs, hinting at the presence of a large population of small D-type asteroids in the main belt. Alternatively, this excess may indicate preferential spectral evolution from D-type surfaces to C and P types as a consequence of space weathering, or point to the fact that D-type objects fragment more often than other spectral types in the NEO space. No further evidence for the existence of collisional families in the main belt, below the detection limit of current main-belt surveys, was found in this work.

Short-period exoplanets on circular orbits are thought to be tidally locked into synchronous rotation. If tidally locked, these planets must possess permanent day- and night-sides, with extreme irradiation on the dayside and none on the nightside. However, so far the tidal locking hypothesis for exoplanets is supported by little to no empirical evidence. Previous work showed that the super-Earth LHS 3844b likely has no atmosphere, which makes it ideal for constraining the planet’s rotation. Here we revisit the Spitzer phase curve of LHS 3844b with a thermal model of an atmosphere-less planet and analyze the impact of nonsynchronous rotation, eccentricity, tidal dissipation, and surface composition. Based on the lack of observed strong tidal heating we rule out rapid nonsynchronous rotation (including a Mercury-like 3:2 spin–orbit resonance) and constrain the planet's eccentricity to less than ∼0.001 (more circular than Io's orbit). In addition, LHS 3844b’s phase curve implies that the planet either still experiences weak tidal heating via a small-but-nonzero eccentricity (requiring an undetected orbital companion), or that its surface has been darkened by space weathering; of these two scenarios we consider space weathering more likely. Our results thus support the hypothesis that short-period rocky exoplanets are tidally locked, and further show that space weathering can significantly modify the surfaces of atmosphere-less exoplanets.

Determining which rocky exoplanets have atmospheres, and why, is a key goal for the James Webb Space Telescope. So far, emission observations of individual rocky exoplanets orbiting M stars (M-Earths) have not provided definitive evidence for atmospheres. Here, we synthesize emission data for M-Earths and find a trend in measured brightness temperatures (ratioed to its theoretical maximum value) as a function of instellation. However, the statistical evidence of this trend is dependent on the choice of stellar model, and we consider its identification tentative. We show that this trend can be explained by either the onset of thin/tenuous (<1 bar) CO2-rich atmospheres on colder worlds, or a population of bare rocks with stronger space weathering and/or coarser regolith on closer-in worlds. Such grain coarsening may be caused by sintering near the melting point of rock or frequent volcanic resurfacing. Furthermore, we highlight considerations when testing rocky planet hypotheses at the population level, including the choice of instrument, stellar modeling, and how brightness temperatures are derived. We also find that fresh (unweathered) fine-grained surfaces can serve as a false positive to the detection of moderate atmospheric heat redistribution through eclipse observations. However, we argue that such surfaces are unlikely given the ubiquity of space weathering in the solar system, the low albedo of solar system airless bodies, and the high stellar wind environments of M-Earths. Emission data from a larger sample of M-Earths will be able to confirm or reject this tentative trend and diagnose its cause through spectral characterization.

Rock breakdown due to diurnal thermal cycling has been hypothesized to drive boulder degradation and regolith production on airless bodies. Numerous studies have invoked its importance in driving landscape evolution, yet morphological features produced by thermal fracture processes have never been definitively observed on an airless body, or any surface where other weathering mechanisms may be ruled out. The Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) mission provides an opportunity to search for evidence of thermal breakdown and assess its significance on asteroid surfaces. Here we show boulder morphologies observed on Bennu that are consistent with terrestrial observations and models of fatigue-driven exfoliation and demonstrate how crack propagation via thermal stress can lead to their development. The rate and expression of this process will vary with asteroid composition and location, influencing how different bodies evolve and their apparent relative surface ages from space weathering and cratering records. In their study, the authors discuss the potential of thermal weathering on airless bodies. As a case study, they use boulder and fracture morphologies on asteroid Bennu.

Little is known about Earth quasi-satellites, a class of near-Earth small solar system bodies that orbit the sun but remain close to the Earth, because they are faint and difficult to observe. Here we use the Large Binocular Telescope (LBT) and the Lowell Discovery Telescope (LDT) to conduct a comprehensive physical characterization of quasi-satellite (469219) Kamoʻoalewa and assess its affinity with other groups of near-Earth objects. We find that (469219) Kamoʻoalewa rotates with a period of 28.3 (+1.8/−1.3) minutes and displays a reddened reflectance spectrum from 0.4–2.2 microns. This spectrum is indicative of a silicate-based composition, but with reddening beyond what is typically seen amongst asteroids in the inner solar system. We compare the spectrum to those of several material analogs and conclude that the best match is with lunar-like silicates. This interpretation implies extensive space weathering and raises the prospect that Kamo’oalewa could comprise lunar material.

Multi‐temporal observations captured by the Lunar Reconnaissance Orbiter Camera provide valuable insights into contemporary surface changes. These images reveal that minor impact events (resulting in <100‐m diameter craters) significantly alter regolith structure over great distances (>1,000 crater diameters) by increasing the meter‐to‐submeter photometric roughness. Here, we document the first observed decadal‐scale changes in the photometric response consistent with the rapid reconstruction of a porous surface structure within the first decade after an impact. We propose that these changes are driven by the redistribution of fine particles through a combination of micrometeoroid impacts, charged‐particle interactions, and the solar radiation‐induced photoelectric effect. This reworking of the upper regolith results in the overturning of particle facets directly exposed at the surface, affecting the time at which individual facets are exposed to space weathering processes. This continual process and exposure of fresh particle surfaces suggest a dynamic equilibrium between impact‐driven disruption and regolith recovery.

Mars' surface is characterized by a weathered layer of regolith and exposed rock exposures that are the results of long‐term geological processes. The Mars Rover Penetrating Radar (RoPeR) on board the Zhurong rover of China's first Mars mission (Tianwen‐1) has been investigating the fine structure and dielectric properties of the martian regolith in the southern Utopia Planitia. The permittivity of the regolith within 5 m of the landing zone is 3.6−2.0+3.1${3.6}_{-2.0}^{+3.1}$ , and the average loss tangent is 0.0174−0.0053+0.0053${0.0174}_{-0.0053}^{+0.0053}$ . The high lossy parameter suggests the possible cause for the missing subsurface reflectors in the landing region detected by either in‐situ radar or orbiter radars. The permittivity distribution map has been derived to show permittivity varying with depth and location. The high dispersion of both permittivity and loss tangent values along the traverse path indicates relatively heterogeneous material distribution on the landing site compared to an airless body such as the Moon. Plain Language Summary A layer of regolith covers the surface of Mars, which is the result of geologic processes that occurred over millions to billions of years. Compared to the observations from satellites, the Zhurong rover of China's first Mars mission (Tianwen‐1) had a closer look at the properties of the regolith layer in the explored region within southern Utopia Planitia. There is evidence that the exposed materials might be related to aqueous activities. Local landforms on the surface suggest the possible presence of buried volatiles, like water ice. The radar instrument (RoPeR) on board the rover can expose subsurface structures and the dielectric properties of the regolith layer at high‐resolution, to assess their composition. The loss tangent results suggest that water ice is not the main component of the local martian regolith at some depth. The scattering distribution of radar profile along the traveling path and heterogeneous subsurface features show more diverse surface processes and weaker space weathering effects on Mars than those on the airless Moon. Key Points The dielectric properties of martian regolith at the Tianwen‐1 landing site suggest that water ice is not the dominant component The radar image and permittivity and loss tangent distribution maps show a high heterogeneity of subsurface materials Compared to the lunar regolith, the martian regolith shows more diverse surface processes and weaker space weathering effects