Explore the vast range of titles available.

In this study, we describe the synthesis and characterization of silver nanoparticles (Ag-NPs) of different sizes and evaluated their antibacterial activity. Particles size and morphology were characterized by transmission electron microscopy. Evaluation of the bacteriostatic effects was performed by ultraviolet-visible spectrophotometry and comet assays. The smaller the particle size of Ag-NPs, the smaller the value of the minimum inhibitory concentration (MIC) and minimum bactericidal concentrations (MBC), indicating the greater the antibacterial activity. The antibacterial activity was determined by the generation of reactive oxygen species (ROS) by bacteria and by bacterial membrane damage. In this study, we determined ROS-induced damage of bacteria caused by Ag-NPs. In conclusion, our findings indicated that Ag-NPs were effective at different particle sizes and concentrations and that the smaller the particle size of Ag-NPs, the greater the antibacterial activity.

A simple and general chemical structure change to a panel of cell-permeable small-molecule fluorophores increases their brightness and photostability, which will enable improved single-molecule studies and super-resolution imaging. Specific labeling of biomolecules with bright fluorophores is the keystone of fluorescence microscopy. Genetically encoded self-labeling tag proteins can be coupled to synthetic dyes inside living cells, resulting in brighter reporters than fluorescent proteins. Intracellular labeling using these techniques requires cell-permeable fluorescent ligands, however, limiting utility to a small number of classic fluorophores. Here we describe a simple structural modification that improves the brightness and photostability of dyes while preserving spectral properties and cell permeability. Inspired by molecular modeling, we replaced the N , N -dimethylamino substituents in tetramethylrhodamine with four-membered azetidine rings. This addition of two carbon atoms doubles the quantum efficiency and improves the photon yield of the dye in applications ranging from in vitro single-molecule measurements to super-resolution imaging. The novel substitution is generalizable, yielding a palette of chemical dyes with improved quantum efficiencies that spans the UV and visible range.

Table 1 The effects of several interfering chemicals on the activity of the catalase enzyme Supposed chemical interferences Concentration of supposed chemical interferences Added catalase U mL− 1 Found catalase U mL− 1 Relative error (%) Heparin 78.4 USP/10 mL 0.5 0.509 −1.8 EDTA 20.0 μM 0.5 0.511 −2.2 Glucose 0.35 mg mL−1 0.5 0.509 −1.8 Histidine 50 μM 0.5 0.492 1.6 Albumin 0.5 mg mL−1 0.5 0.516 −3.2 Ascorbic acid 20.0 μM 0.5 0.489 2.2 Arginine 50 μM 0.5 0.507 −1.4 Uric Acid 50 μM 0.5 0.495 1 Lysine 50 μM 0.5 0.509 −1.8 The results obtained for each sample by the present assay were compared with those obtained by the dichromate method as described previously by Sinha [7] and modified by Hadwan [8]. Table 4 Analytical recovery of activity of catalase enzyme added to the reaction solution Catalase enzyme contents Catalase enzyme activity added U mL−1 Catalase enzyme calculated activity U mL− 1 Catalase enzyme observed activitya U mL− 1 Recovery % Enzymatic sample – – 5 – Enzymatic sample + catalase enzyme added 1 6 5.85 97.5% Enzymatic sample + catalase enzyme added 3 8 7.9 98.75% Enzymatic sample + catalase enzyme added 5 10 9.82 98.2% Enzymatic sample + catalase enzyme added 7 12 12.11 100.9% Enzymatic sample + catalase enzyme added 8 13 12.75 98.2% Enzymatic sample + catalase enzyme added 9 14 12.7 90.8% Enzymatic sample + catalase enzyme added 10 15 12.75 85% amean of triplicate determinations Conversion of hydrogen peroxide (H2O2) to molecular oxygen and water (H2O) in a chemical reaction regulated by catalase was monitored by determining the absorbance of the carbonato-cobaltate (III) complex as a function of time (as shown in Fig. 2). According to the results shown in Table 1, the presence of vitamins, amino acids, proteins, and antioxidants in biological fluids did not interfere with the currently proposed method of assessing catalase activity. [...]the usual difficulties of the UV-dependent method, including comparatively low selectivity and sensitivity, and disturbance of absorbance due to the evolution of gaseous oxygen, can be overcome.

Following the spread of the COVID-19 pandemic crisis, a race was initiated to find a successful regimen for postinfections. Among those trials, a recent study declared the efficacy of an antiviral combination of favipiravir (FAV) and molnupiravir (MLP). The combined regimen helped in a successful 60% eradication of the SARS-CoV-2 virus from the lungs of studied hamster models. Moreover, it prevented viral transmission to cohosted sentinels. Because both medications are orally bioavailable, the coformulation of FAV and MLP can be predicted. The developed study is aimed at developing new green and simple methods for the simultaneous determination of FAV and MLP and then at their application in the study of their dissolution behavior if coformulated together. A green micellar HPLC method was validated using an RP-C18 core-shell column (5 μm, 150 × 4.6 mm) and an isocratic mixed micellar mobile phase composed of 0.1 M SDS, 0.01 M Brij-35, and 0.02 M monobasic potassium phosphate mixture and adjusted to pH 3.1 at 1.0 mL min−1 flow rate. The analytes were detected at 230 nm. The run time was less than five minutes under the optimized chromatographic conditions. Four other multivariate chemometric model methods were developed and validated, namely, classical least square (CLS), principal component regression (PCR), partial least squares (PLS-1), and genetic algorithm–partial least squares (GA–PLS-1). The developed models succeeded in resolving the great similarity and overlapping in the FAV and MLP UV spectra unlike the traditional univariate methods. All methods were organic solvent-free, did not require extraction or derivatization steps, and were applied for the construction of the simultaneous dissolution profile for FAV tablets and MLP capsules. The methods revealed that the amount of the simultaneously released cited drugs increases up until reaching a plateau after 15 and 20 min for FAV and MLP, respectively. The greenness was assessed on GAPI and found to be in harmony with green analytical chemistry concepts.

Recently, the biosynthesis of zinc oxide nanoparticles (ZnO NPs) from crude extracts and phytochemicals has attracted much attention. Green synthesis of NPs is cost-effective, eco-friendly, and is a promising alternative for chemical synthesis. This study involves ZnO NPs synthesis using Rubus fairholmianus root extract (RE) as an efficient reducing agent. The UV spectrum of RE-ZnO NPs exhibited a peak at 357 nm due to intrinsic bandgap absorption and an XRD pattern that matches the ZnO crystal structure (JCPDS card no: 36-1451). The average particle size calculated from the Debye–Scherrer equation is 11.34 nm. SEM analysis showed that the RE-ZnO NPs spherical in shape with clusters (1–100 nm). The antibacterial activity of the NPs was tested against Staphylococcus aureus using agar well diffusion, minimum inhibitory concentration, and bacterial growth assay. The R. fairholmianus phytochemicals facilitate the synthesis of stable ZnO NPs and showed antibacterial activity.

Limonium brasiliense is a common plant on the southern coast of Brazil. The roots are traditionally used for treatment of premenstrual syndrome, menstrual disturbances and genito-urinary infections. Pharmaceutical preparations obtained from its roots and used for these purposes were marketed in Brazil in the 1980s and 1990s. Currently, the Brazilian Drug Agency (National Health Surveillance Agency, ANVISA) has canceled the registration of these products, and their use was discontinued because of a lack of studies to characterize the plant raw material and ensure the effectiveness and safety of its use. The aim of the present study was to develop and validate an analytical method to determine the content of total polyphenols (TP) in an extract from L. brasiliense roots, by the UV/Vis spectrophotometric method. L. brasiliense roots were extracted in acetone:water (7:3, v/v-10% w/v). The crude extract was used to develop a method for TP assay. The method was validated according to national and international guidelines. The optimum conditions for analysis time, wavelength, and standard substance were 30 min, 760 nm, and pyrogallol, respectively. Under these conditions, validation by UV/Vis spectrophotometry proved the method to be linear, specific, precise, accurate, reproducible, robust, and easy to perform. This methodology complies with the requirements for analytical application and to ensure the reliability of the results.

Peels and edible pulp from three species of citrus including Citrus aurantifolia (varieties pica and sutil) and Citrus x lemon var. Genova widely cultivated and consumed in Northern Chile (I and II region) were analyzed for phenolic compounds and antioxidant activity for the first time. A high performance electrospray ionization mass spectrometry (HPLC-UV-ESI-MS) method was developed for the rapid identification of phenolics in extracts from peels and juices of all species. Several flavonoids including one kaempferol-O-hexoside (peak 16) and one hesperidin derivative (peak 22) three quercetin derivatives (peaks 4, 19 and 36), five isorhamnetin derivatives (peaks 5, 23, 24, 26 and 29) four luteolin derivatives (peaks 14, 25, 27 and 40), seven apigenin derivatives (peaks 2, 3, 12, 20, 34, 35 and 39), seven diosmetin derivatives (peaks 7–9, 17, 21, 31 and 37), three chrysoeriol derivatives (peaks 10, 18 and 30), and four eryodictiol derivatives (peaks 6, 13, 15 and 38) were identified in negative and positive mode using full scan mass measurements and MSn fragmentations. Ascorbic acid content was higher in the pulps of the varieties Genova and Sutil (60.13 ± 1.28 and 56.53 ± 1.06 mg ascorbic acid per g dry weight, respectively) while total phenolic content was higher in Pica peels followed by Sutil peels (34.59 ± 0.81 and 25.58 ± 1.02 mg/g GAE dry weight, respectively). The antioxidant capacity was also higher for Pica peels (10.34 ± 1.23 µg/mL in the DPPH assay and 120.63 ± 2.45 µM trolox equivalents/g dry weight in the FRAP assay). The antioxidant features together with the high polyphenolic contents can support at least in part, the usage of the peel extracts as nutraceutical supplements, especially to be used as anti-ageing products.

As competition in the biopharmaceutical market gets keener due to the market entry of biosimilars, process analytical technologies (PATs) play an important role for process automation and cost reduction. This article will give a general overview and address the recent innovations and applications of spectroscopic methods as PAT tools in the downstream processing of biologics. As data analysis strategies are a crucial part of PAT, the review discusses frequently used data analysis techniques and addresses data fusion methodologies as the combination of several sensors is moving forward in the field. The last chapter will give an outlook on the application of spectroscopic methods in combination with chemometrics and model predictive control (MPC) for downstream processes.

Cannabis is gaining increasing attention due to the high pharmacological potential and updated legislation authorizing multiple uses. The development of time- and cost-efficient analytical methods is of crucial importance for phytocannabinoid profiling. This review aims to capture the versatility of analytical methods for phytocannabinoid profiling of cannabis and cannabis-based products in the past four decades (1980–2021). The thorough overview of more than 220 scientific papers reporting different analytical techniques for phytocannabinoid profiling points out their respective advantages and drawbacks in terms of their complexity, duration, selectivity, sensitivity and robustness for their specific application, along with the most widely used sample preparation strategies. In particular, chromatographic and spectroscopic methods, are presented and discussed. Acquired knowledge of phytocannabinoid profile became extremely relevant and further enhanced chemotaxonomic classification, cultivation set-ups examination, association of medical and adverse health effects with potency and/or interplay of certain phytocannabinoids and other active constituents, quality control (QC), and stability studies, as well as development and harmonization of global quality standards. Further improvement in phytocannabinoid profiling should be focused on untargeted analysis using orthogonal analytical methods, which, joined with cheminformatics approaches for compound identification and MSLs, would lead to the identification of a multitude of new phytocannabinoids.

Sunscreen is released into the marine environment and is considered toxic for marine life. The current analytical methods for the quantification of sunscreen are mostly specific to individual chemical ingredients and based on complex analytical and instrumental techniques. A simple, selective, rapid, reproducible and low-cost spectrophotometric procedure for the quantification of commercial sunscreen in seawater is described here. The method is based on the inherent properties of these cosmetics to absorb in the wavelength of 300–400 nm. The absorption at 303 nm wavelength correlates with the concentration of most commercial sunscreens. This method allows the determination of sunscreens in the range of 2.5–1500 mg L -1 , it requires no sample pretreatment and offers a precision of up to 0.2%. The spectrophotometric method was applied to quantify sunscreen concentrations at an Atlantic Beach with values ranging from 10 to 96.7 mg L -1 in the unfiltered fraction and from the undetectable value to 75.7 mg L -1 in the dissolved fraction. This method is suggested as a tool for sunscreen quantifications in environmental investigations and monitoring programs.