Explore the vast range of titles available.

Repairing of large bone injuries is an important problem in bone regeneration field. Thus, developing new therapeutic approaches such as tissue engineering using 3D scaffolds is necessary. Incorporation of some bioactive materials and trace elements can improve scaffold properties. We made chitosan/alginate/strontium-doped bioglass composite scaffolds with optimized properties for bone tissue engineering. Bioglass (BG) and Sr-doped bioglasses (Sr-BG) were synthesized using Sol-Gel method. Alginate-Chitosan (Alg/Cs) scaffold and scaffolds containing different ratio (10%, 20% and 30%) of BG (Alg/Cs/BG10, 20, 30) or Sr-BG (Alg/Cs/Sr-BG10, 20, 30) were fabricated using freeze drying method. Characterization of bioglasses/scaffolds was done using zeta sizer, FTIR, XRD, (FE) SEM and EDS. Also, mechanical strength, antibacterial effect degradation and swelling profile of scaffolds were evaluated. Bone differentiation efficiency and viability of MSCs on scaffolds were determined by Alizarin Red, ALP and MTT methods. Cell toxicity and antibacterial effect of bioglasses were determined using MTT, MIC and MBC methods. Incorporation of BG into Alg/Cs scaffolds amplified biomineralization and mechanical properties along with improved swelling ratio, degradation profile and cell differentiation. Mechanical strength and cell differentiation efficiency of Alg/Cs/BG20 scaffold was considerably higher than scaffolds with lower or higher BG concentrations. Alg/Cs/Sr-BG scaffolds had higher mechanical stability and more differentiation efficiency in comparison with Alg/Cs and Alg/Cs/BG scaffolds. Also, Mechanical strength and cell differentiation efficiency of Alg/Cs/Sr-BG20 scaffold was considerably higher than scaffolds with various Sr-BG concentrations. Biomineralization of Alg/Cs/BG scaffolds slightly was higher than Alg/Cs/Sr-BG scaffolds. Overall, we concluded that Alg/Cs/Sr-BG20 scaffolds are more suitable for repairing bone major injuries.

Reconstruction of osteoporotic bone defects is a clinical problem that continues to inspire the design of new materials. : In this work, bioceramics composed of strontium (Sr)-doped hydroxyapatite (HA) whiskers or pure HA whiskers were successfully fabricated by hydrothermal treatment and respectively named SrWCP and WCP. Both bioceramics had similar three-dimensional (3D) porous structures and mechanical strengths, but the SrWCP bioceramic was capable of releasing Sr under physiological conditions. In an osteoporotic rat metaphyseal femoral bone defect model, both bioceramic scaffolds were implanted, and another group that received WCP plus strontium ranelate drug administration (Sr-Ran+WCP) was studied for comparison. : At week 1 post-implantation, osteogenesis coupled blood vessels were found to be more common in the SrWCP and Sr-Ran+WCP groups, with substantial vascular-like structures. After 12 weeks of implantation, comparable to the Sr-Ran+WCP group, the SrWCP group showed induction of more new bone formation within the defect as well as at the implant-bone gap region than that of the WCP group. Both the SrWCP and Sr-Ran+WCP groups yielded a beneficial effect on the surrounding trabecular bone microstructure to resist osteoporosis-induced progressive bone loss. While an abnormally high blood Sr ion concentration was found in the Sr-Ran+WCP group, SrWCP showed little adverse effect. : Our results collectively suggest that the SrWCP bioceramic can be a safe bone substitute for the treatment of osteoporotic bone defects, as it promotes local bone regeneration and implant osseointegration to a level that strontium ranelate can achieve.

This study evaluated the effects of 30% hydrogen peroxide (HP) solution incorporated with strontium-containing Fluorapatite (Sr-FAp) on whitening efficacy and enamel surface properties, aiming to minimize enamel damage during bleaching. A total of 60 extracted bovine teeth were stained with black tea and divided into five groups ( n  = 12): DW (distilled water), 30% HP, 1 wt% Sr-FAp + HP, 5 wt% Sr-FAp + HP, and 10 wt% Sr-FAp + HP. DW and HP solutions with or without Sr-FAp were applied three times for 20 min each. The surface color alteration, gloss, roughness, microhardness, and enamel microstructure were analyzed before and after bleaching. All experimental groups showed significantly higher ΔE ab values than those of the DW group ( p  < 0.05), with no significant differences between Sr-FAp concentrations ( p  > 0.05). ΔWI D and ΔE₀₀ followed similar trends. Gloss decreased in all HP-treated groups compared to the DW group ( p  < 0.05), with the 10 wt% Sr-FAp group showing the lowest gloss ( p  < 0.05). There were no significant differences in surface roughness ( p  > 0.05), whereas the 10 wt% Sr-FAp group showed the highest microhardness value ( p  < 0.05). Observations of the enamel surface revealed the presence of Sr-FAp nanoparticles in all Sr-FAp groups. HP containing Sr-FAp effectively whitened the teeth while preserving the enamel microhardness and structure via a protective Sr-FAp layer. Sr-FAp shows promise as a remineralizing filler for whitening treatments, maintaining whitening efficacy while minimizing enamel damage.

Bioactive glasses (BGs) have attracted added attention in the structure of the scaffolds for bone repair applications. Different metal ions could be doped in BGs to induce specific biological responses. Among these ions, strontium (Sr) is considered as an effective and safe doping element with promising effects on bone formation and regeneration. In this experiment, we evaluated the antibacterial activities of the gelatin-BG (Gel-BG) and Gel-BG/Sr scaffolds in vitro. The osteogenic properties of the prepared scaffolds were also assessed in rabbit calvarial bone defects for 12 weeks. Both scaffolds showed in vivo bone formation during 12 weeks with the newly formed bone area in Gel-BG/Sr scaffold was higher than that in Gel-BG scaffolds after the whole period. Based on the histological results, Gel-BG/Sr exhibited acceleration of early-stage bone formation in vivo. The results of antibacterial investigation for both scaffolds showed complete growth inhibition against Escherichia coli ( E. coli ). Although Gel-BG revealed no antibacterial effect on Staphylococcus aureus ( S. aureus ), the Gel-BG/Sr was able to partially inhibit the growth of S. aureus , as detected by threefold reduction in growth index. Our results confirmed that Sr doped BG is a favorable candidate for bone tissue engineering with superior antibacterial activity and bone regeneration capacity compared with similar counterparts having no Sr ion.

Calcium phosphate cement (CPC) has been widely studied, but its lack of osteoinductivity and inadequate mechanical properties limit its application, while strontium is able to promote bone formation and inhibit bone resorption. In this study, different proportions of tristrontium silicate were introduced to create a novel strontium-modified calcium phosphate cement (SMPC). The physicochemical properties of SMPC and CPC were compared, and the microstructures of the bone cements were characterized with scanning electron microscopy assays. Then, the effect of SMPC on cell proliferation and differentiation was examined. Furthermore, local inflammatory response and osteogenesis after SMPC implantation were also confirmed in the study. Finally, a rat model of isolated vertebral defects was used to test the biomechanical properties of the cements. The results showed that SMPC has better injectability and a shorter setting time than CPC. Meanwhile, the addition of tristrontium silicate promoted the mechanical strength of calcium phosphate cement, and the compressive strength of 5% SMPC increased to 6.00 ± 0.74 MPa. However, this promotion effect gradually diminished with an increase in tristrontium silicate, which was also found in the rat model of isolated vertebral defects. Furthermore, SMPC showed a more preferential role in promoting cell proliferation and differentiation compared to CPC. Neither SMPC nor CPC showed significant inflammatory responses in vivo. Histological staining suggested that SMPCs were significantly better than CPC in promoting new bone regeneration. Importantly, this osteogenesis effect of SMPC was positively correlated with the ratio of tristrontium silicate. In conclusion, 5% SMPC is a promising substitute material for bone repair with excellent physicochemical properties and biological activity.

The aim of the present study is to synthesize Cu 1−x Sr x S (x = 0.00, 0.025, 0.05, 0.075, and 0.1) nanoparticles (NPs) using an easy chemical co-precipitation method in an efficient, inexpensive, and simple technique. The structural, morphological, and optical properties of the prepared samples were investigated using XRD, TEM, XRF, UV–Vis DRS, and PL characterization techniques. XRD spectra confirmed the Sr-doped copper sulfide nanoparticles have a hexagonal structure with crystallite sizes ranging from 15.15 to 16.04 nm, and, by XRF, the presence of the dopant was detected. TEM analysis confirmed that strontium ions had an effect on the shape of the CuS nanostructure, and the particle size increased from 16.27 to 17.32 nm after doping. A study using UV-Vis showed the presence of Sr doping increased the optical energy band gap (1.38 eV to 1.59 eV). At room temperature, one photoluminescence (PL) band was found at 826 nm. The antibacterial activity of CuS nanostructures against E. coli , P. aeruginosa , Klebsiella pneumonia , and S. aureus was evaluated by zone of inhibition. Sr doped CuS NPs exhibited the highest antibacterial activity against S. aureus (17 to 29 mm). Also, the results demonstrated that samples doped with 5, 7.5, and 10% Sr exhibited inhibitory effects against all the tested microbial strains higher than the antibiotic.

The emergence of antibiotic-resistant strains caused by the extensive use of antibiotics in the world requires a preventive approach to stop the infection spread, especially in a hospital setting. So, there is a growing demand for materials that can inhibit bacteria growth or have bactericidal effects. In this paper, an inexpensive and durable Cu-containing strontium-modified phosphate glass with a considerable antimicrobial effect is proposed. The basic physical properties of the material are studied, and its antimicrobial effect is evaluated on Staphylococcus aureus bacteria, known to be the most common problem in hospital environments because of healthcare-associated infections. The glass powders demonstrate strong antibacterial efficacy with a concentration of only a few mg/mL, sufficient to eradicate the entire bacterial colonies within 24 h. Bulk surfaces of these glasses inhibit bacterial growth and release low, non-toxic levels of their constituent elements into simulated body fluid. On the basis of the obtained results, it is shown that the proposed glass can be used as a structural material for various medical equipment and/or components of antimicrobial coating/paint not only in medicine but also for high touch point articles in public places like schools, gyms, public offices and similar.

Polyetheretherketone (PEEK) is widely used in orthopedic and dental implants due to its excellent mechanical properties, chemical stability, and biocompatibility. However, its inherently bioinert nature makes it present weak osteogenic activity, which greatly restricts its clinical adoption. Herein, strontium (Sr) is incorporated onto the surface of PEEK using mussel-inspired polydopamine coating to improve its osteogenic activity. X-ray photoelectron spectroscopy and ion release assay results confirm that different concentrations of Sr are incorporated onto the PEEK substrate surfaces. The strontium-modified PEEK samples show a stable Sr ion release in 35 days of detection. Better results of MC3T3-E1 pre-osteoblasts adhesion, spreading, and proliferation can be observed in strontium-modified PEEK groups, which demonstrates strontium-modified PEEK samples with the improved MC3T3-E1 pre-osteoblasts compatibility. The boosted osteogenic activity of strontium-modified PEEK samples has been demonstrated by the better performed of ALP activity, extracellular matrix mineralization, collagen secretion, and the remarkable up-regulation of ALP, OCN, OPN, Runx2, Col-I, BSP, and OSX of the MC3T3-E1 pre-osteoblasts. Additionally, the strontium-modified PEEK samples exhibit a dose-dependent enhancement of osteoblasts compatibility and osteogenic activity, and the PEEK-Sr10 group shows the best. These findings indicate that strontium-decorated PEEK implants show promising application in orthopedic and dental implants.

Phosphate bioactive glass has been studied for its advanced biodegradability and active ion release capability. Our previous research found that phosphate glass containing (P2O5)–(Na2O)–(TiO2)–(CaO)–(SrO) or (ZnO) showed good biocompatibility with MG63 and hMSCs. This study further investigated the application of 5 mol% zinc oxide or 17.5 mol% strontium oxide in titanium-doped phosphate glass for bone tissue engineering. Ti-Ca-Na-Phosphate glasses, incorporating 5% zinc oxide or 17.5% strontium oxide, were made with melting quenching technology. The pre-osteoblast cell line MC3T3-E1 was cultured for indirect contact tests with graded diluted phosphate glass extractions and for direct contact tests by seeding cells on glass disks. The cell viability and cytotoxicity were analysed in vitro over 7 days. In vivo studies utilized the tibial defect model with or without glass implants. The micro-CT analysis was performed after surgery and then at 2, 6, and 12 weeks. Extractions from both zinc and strontium phosphate glasses showed no negative impact on MC3T3-E1 cell viability. Notably, non-diluted Zn-Ti-Ca-Na-phosphate glass extracts significantly increased cell viability by 116.8% (P < 0.01). Furthermore, MC3T3-E1 cells cultured with phosphate glass disks exhibited no increase in LDH release compared with the control group. Micro-CT images revealed that, over 12 weeks, both zinc-doped and strontium-doped phosphate glasses demonstrated good bone incorporation and longevity compared to the no-implant control. Titanium-doped phosphate glasses containing 5 mol% zinc oxide, or 17.5 mol% strontium oxide have promising application potential for bone regeneration research.

The increasing incidence of trauma in medicine brings with it new demands on the materials used for the surgical treatment of bone fractures. Titanium, its alloys, and steel are used worldwide in the treatment of skeletal injuries. These metallic materials, although inert, are often removed after the injured bone has healed. The second-stage procedure—the removal of the plates and screws—can overwhelm patients and overload healthcare systems. The development of suitable absorbable metallic materials would help us to overcome these issues. In this experimental study, we analyzed an extruded Zn-0.8Mg-0.2Sr (wt.%) alloy on a rabbit model. From this alloy we developed screws which were implanted into the rabbit tibia. After 120, 240, and 360 days, we tested the toxicity at the site of implantation and also within the vital organs: the liver, kidneys, and brain. The results were compared with a control group, implanted with a Ti-based screw and sacrificed after 360 days. The samples were analyzed using X-ray, micro-CT, and a scanning electron microscope. Chemical analysis revealed only small concentrations of zinc, strontium, and magnesium in the liver, kidneys, and brain. Histologically, the alloy was verified to possess very good biocompatibility after 360 days, without any signs of toxicity at the site of implantation. We did not observe raised levels of Sr, Zn, or Mg in any of the vital organs when compared with the Ti group at 360 days. The material was found to slowly degrade in vivo, forming solid corrosion products on its surface.