Explore the vast range of titles available.

Populations of honey bees and other pollinators have declined worldwide in recent years. A variety of stressors have been implicated as potential causes, including agricultural pesticides. Neonicotinoid insecticides, which are widely used and highly toxic to honey bees, have been found in previous analyses of honey bee pollen and comb material. However, the routes of exposure have remained largely undefined. We used LC/MS-MS to analyze samples of honey bees, pollen stored in the hive and several potential exposure routes associated with plantings of neonicotinoid treated maize. Our results demonstrate that bees are exposed to these compounds and several other agricultural pesticides in several ways throughout the foraging period. During spring, extremely high levels of clothianidin and thiamethoxam were found in planter exhaust material produced during the planting of treated maize seed. We also found neonicotinoids in the soil of each field we sampled, including unplanted fields. Plants visited by foraging bees (dandelions) growing near these fields were found to contain neonicotinoids as well. This indicates deposition of neonicotinoids on the flowers, uptake by the root system, or both. Dead bees collected near hive entrances during the spring sampling period were found to contain clothianidin as well, although whether exposure was oral (consuming pollen) or by contact (soil/planter dust) is unclear. We also detected the insecticide clothianidin in pollen collected by bees and stored in the hive. When maize plants in our field reached anthesis, maize pollen from treated seed was found to contain clothianidin and other pesticides; and honey bees in our study readily collected maize pollen. These findings clarify some of the mechanisms by which honey bees may be exposed to agricultural pesticides throughout the growing season. These results have implications for a wide range of large-scale annual cropping systems that utilize neonicotinoid seed treatments.

Background Mushroom showed pellet, clump and/or filamentous mycelial morphologies during submerged fermentation. Addition of microparticles including Talc (magnesium silicate), aluminum oxide and titanium oxide could control mycelial morphologies to improve mycelia growth and secondary metabolites production. Here, effect of microparticle Talc (45 μm) addition on the mycelial morphology, fermentation performance, monosaccharide compositions of polysaccharides and enzymes activities associated with polysaccharide synthesis in G. frondosa was well investigated to find a clue of the relationship between polysaccharide biosynthesis and morphological changes. Results Addition of Talc decreased the diameter of the pellets and increased the percentage of S-fraction mycelia. Talc gave the maximum mycelial biomass of 19.25 g/L and exo-polysaccharide of 3.12 g/L at 6.0 g/L of Talc, and mycelial polysaccharide of 0.24 g/g at 3.0 g/L of Talc. Talc altered the monosaccharide compositions/percentages in G. frondosa mycelial polysaccharide with highest mannose percentage of 62.76 % and lowest glucose percentage of 15.22 % followed with the corresponding changes of polysaccharide-synthesis associated enzymes including lowest UDP-glucose pyrophosphorylase (UGP) activity of 91.18 mU/mg and highest UDP-glucose dehydrogenase (UGDG) and GDP-mannose pyrophosphorylase (GMPPB) activities of 81.45 mU/mg and 93.15 mU/mg. Conclusion Our findings revealed that the presence of Talc significantly changed the polysaccharide production and sugar compositions/percentages in mycelial and exo-polysaccharides by affecting mycelial morphology and polysaccharide-biosynthesis related enzymes activities of G. frondosa .

Background: Pleurodesis is a treatment method that aims to create permanent adhesion between the pleural layers to prevent recurrent fluid or air accumulation in the pleural cavity. Talc, one of the most commonly preferred agents in this procedure, is widely used in clinical practice. In this study, a new talc formulation with a modified surface to impart antibacterial and analgesic properties was experimentally evaluated for the first time. The main objective of the study was to comparatively assess the inflammatory and fibrotic responses following standard talc and modified talc applications. Methods: Thirty-six 12-week-old female Wistar albino rats were simply randomly divided into three different groups: control (n = 12), standard talc (n = 12), and modified talc (n = 12). Under anesthesia, 1 mL of physiological saline containing 17 mg of talc was injected intrapleurally into the right hemithorax. The presence of pneumothorax after the procedure was assessed by chest radiography. After a 12-day follow-up period, the animals were euthanized. Bronchoalveolar lavage (BAL) fluid samples, blood samples, and lung and pleural tissue samples were collected for biochemical, histopathological, and immunohistochemical analyses. Results: Modified talc application resulted in a significant increase in both visceral and parietal pleural thickness (p < 0.05). Granulation tissue formation and collagen deposition were significantly higher in the modified talc group. In addition, TGF-β expression and CD68-positive macrophage count increased significantly in the modified talc group (p < 0.05). Inflammatory changes in the lung parenchyma were limited and not statistically significant. Conclusions: The modified talc formulation enriched with lidocaine and antibacterial agents produced a stronger inflammatory and fibrotic response compared to standard talc. These findings indicate that modified talc may increase the effectiveness of pleurodesis. Furthermore, the absence of significant lung parenchymal damage suggests that this treatment is locally effective and feasible. However, further long-term and advanced studies are needed to translate these results into clinical use.

Fe3O4/talc nanocomposite was used for removal of Cu(II), Ni(II), and Pb(II) ions from aqueous solutions. Experiments were designed by response surface methodology (RSM) and a quadratic model was used to predict the variables. The adsorption parameters such as adsorbent dosage, removal time, and initial ion concentration were used as the independent variables and their effects on heavy metal ion removal were investigated. Analysis of variance was incorporated to judge the adequacy of the models. Optimal conditions with initial heavy metal ion concentration of 100, 92 and 270 mg/L, 120 s of removal time and 0.12 g of adsorbent amount resulted in 72.15%, 50.23%, and 91.35% removal efficiency for Cu(II), Ni(II), and Pb(II), respectively. The predictions of the model were in good agreement with experimental results and the Fe3O4/talc nanocomposite was successfully used to remove heavy metals from aqueous solutions.

This study investigates the fabrication process of biocomposites and their resultant mechanical and thermal properties, essential for evaluating the performance of finished products. Polypropylene random copolymer (PPRC) was employed as the matrix phase, while rice husk (RH), a biowaste filler, was incorporated in varying concentrations. The rice husk fiber was treated with alkali (RHT) to enhance its lignocellulosic content. To improve interfacial bonding, maleic anhydride and NaOH treatment were utilized. Glass fiber grafted on polypropylene (PPGF) and talc powder functioned as additives. Both raw and treated rice husk fibers were characterized using Fourier-transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), and analytical methods to quantify the composition of lignin, cellulose, hemicellulose, and ash. Significant structural changes were observed, with cellulose content increasing from 26% to 53%. Wood polymer composites (WPC) produced from raw and treated rice husk were evaluated based on morphological studies, Izod impact testing, water absorption, heat distortion temperature (HDT), and VICAT softening temperature (VST). The results demonstrated that the HDT and VST of WPC improved by 24% and 7%, respectively, compared to PPRC, indicating enhanced structural and thermal properties. Additionally, impact strength and water absorption were found to be dependent on cellulose concentrations in the biocomposite. This study underscores the environmental benefits of utilizing biowaste rice husk in biocomposites, promoting sustainability by converting agricultural waste into valuable materials with enhanced properties for various industrial applications.

Streptomyces produce a broad spectrum of biologically active molecules such as oxytetracycline and rimocidin, which are widely used in human and animal treatments. microparticle-enhanced cultivation (MPEC) is one of the tools used for Streptomyces bioprocesses intensification by the control of mycelial morphology. In the present work, morphological changes of Streptomyces rimosus caused by the addition of 10 µm talc microparticles in MPEC were correlated with the biosynthetic activity of the microorganism. Comparing the runs with and without microparticles, major morphological changes were observed in MPEC, including the deformation of pellets, variation of their size, appearance of hyphae and clumps as well as the aggregation of mycelial objects. The presence of talc microparticles also influenced the levels of the studied secondary metabolites produced by S. rimosus. Comparing control and MPEC runs, the addition of talc microparticles increased the amounts of oxytetracycline (9-fold), 2-acetyl-2-decarboxamido-oxytetracycline (7-fold), milbemycin A3+4[O] (3-fold) and CE 108 (1.5-fold), while rimocidin (27-ethyl) and milbemycin β11+4[O] production was reduced. In summary, the addition of talc microparticles to S. rimosus cultivations led to the development of smaller morphological forms like hyphae and clumps as well as to the changes in the amounts of secondary metabolites.

Background Talc, a hydrous magnesium silicate, often used for genital hygiene purposes, is associated with ovarian carcinoma in case-control studies. Its potential to cause inflammation, injury, and functional changes in cells has been described. A complication of such studies is that talc preparations may be contaminated with other materials. A previous study by (Beck et al. Toxicol Appl Pharmacol 87:222-34, 1987) used a hamster model to study talc and granite dust exposure effects on various biochemical and cellular inflammatory markers. Our current study accessed key materials used in that 1987 study; we re-analyzed the original talc dust with contemporary scanning electron microscopy and energy dispersive x-ray analysis (SEM/EDX) for contaminants. We also examined the original bronchoalveolar lavage (BAL) cells with polarized light microscopy to quantify cell-associated birefringent particles to gain insight into the talc used. Results SEM/EDX analyses showed that asbestos fibers, quartz, and toxic metal particulates were below the limits of detection in the original talc powder. However, fibers with aspect ratios ≥3:1 accounted for 22% of instilled material, mostly as fibrous talc. Talc (based on Mg/Si atomic weight % ratio) was the most abundant chemical signature, and magnesium silicates with various other elements made up the remainder. BAL cell counts confirmed the presence of acute inflammation, which followed intratracheal instillation. Measurements of cell associated birefringent particles phagocytosis revealed significant differences among talc, granite, and control exposures with high initial uptake of talc compared to granite, but over the 14-day experiment, talc phagocytosis by lavaged cells was significantly less than that of granite. Phagocytosis of talc fibers by macrophages was observed, and birefringent particles were found in macrophages, neutrophils, and multinucleate giant cells in lavaged cells from talc-exposed animals. Conclusion Our data support the contention that talc, even without asbestos and other known toxic contaminants, may elicit inflammation and contribute to lung disease. Our findings support the conclusions of (Beck et al. Toxicol Appl Pharmacol 87:222-34, 1987) study. By analyzing particulate exposures with polarized light microscopy and SEM/EDX, fibrous talc was identified and a distinctive pattern of impaired particulate ingestion was demonstrated.

was more thermally resistant in dry- than in wet-inoculated almond meal. Presence of talc affected thermal resistance of in almond meal. Use of dry inoculum carriers for thermal validation studies requires further work.

The aim of this research was to synthesize and develop a new method for the preparation of iron oxide (Fe(3)O(4)) nanoparticles on talc layers using an environmentally friendly process. The Fe(3)O(4) magnetic nanoparticles were synthesized using the chemical co-precipitation method on the exterior surface layer of talc mineral as a solid substrate. Ferric chloride, ferrous chloride, and sodium hydroxide were used as the Fe(3)O(4) precursor and reducing agent in talc. The talc was suspended in deionized water, and then ferrous and ferric ions were added to this solution and stirred. After the absorption of ions on the exterior surface of talc layers, the ions were reduced with sodium hydroxide. The reaction was carried out under a nonoxidizing oxygen-free environment. There were not many changes in the interlamellar space limits (d-spacing = 0.94-0.93 nm); therefore, Fe(3)O(4) nanoparticles formed on the exterior surface of talc, with an average size of 1.95-2.59 nm in diameter. Nanoparticles were characterized using different methods, including powder X-ray diffraction, transmission electron microscopy, emission scanning electron microscopy, energy dispersive X-ray spectroscopy, and Fourier transform infrared spectroscopy. These talc/Fe(3)O(4) nanocomposites may have potential applications in the chemical and biological industries.

A pilot study was undertaken to characterize the concentration, duration and particle size distribution of the talc cloud that forms in the personal breathing zone (PBZ) during application of certain talc-containing cosmetics. Multiple direct-reading instruments were employed to simultaneously monitor PM4 concentrations (particulate matter with aerodynamic diameter < 4 µm; mg/m3) at different distances from each of three subjects while they applied talc products. Results indicated that the purpose and method of applying the talc product, combined with behavioral and physical differences amongst subjects, all strongly influenced airborne talc concentrations and the duration of the cloud. Air concentrations of talc in the PBZ averaged around 1.0 mg/m3, and the duration of exposure varied from less than one minute to more than ten minutes. The real-time monitors captured the occasional formation of secondary clouds, likely caused by resuspension of talc particles from skin or other surfaces. Measurements of aerosolized baby powder, face powder, and two adult body powders indicated that the median aerodynamic diameter of the talc cloud ranged from 1.7 to 2.0 µm. These direct-reading approaches were valuable for providing detailed characterization of short duration exposures to airborne talc particles, and will be useful to support future exposure assessments of talc and other powders in consumer products.