Explore the vast range of titles available.

The pressure oscillation and terminal shock motion in a two dimensional inlet, which was designed for tandem configuration turbine-based combined cycle propulsion systems was investigated experimentally and numerically, respectively. The inlet was characterised by a bleed cavity upstream the inlet throat, an S-shape rectangular-to-circular diffuser and flowpaths for a turbine and a ramjet engine. The terminal shock motion was calculated through a second-order unsteady Reynolds-averaged Navier-Stokes scheme. The pressure and the terminal shock were unsteady when the combined cycle inlet operated at different conditions. With the terminal shock located in the throat and at the shoulder of the third ramp of the TBCC inlet, the pressure oscillation was significant and the shock exhibited unsteady streamwise motion with an oscillatory pattern. The amplitude of shock oscillation at these two conditions was 6mm and 12mm, respectively. When the shock was located downstream of the throat and upstream of the cowl lip, it oscillated in a small range. We defined this motion as the “shake” of the shock. This unsteady behaviour of the shock was caused by flow separation in the combined cycle inlet diffuser.

Self‐assembled monolayers (SAMs) employed in inverted perovskite solar cells (PSCs) have achieved groundbreaking progress in device efficiency and stability for both single‐junction and tandem configurations, owing to their distinctive and versatile ability to manipulate chemical and physical interface properties. In this regard, we present a comprehensive review of recent research advancements concerning SAMs in inverted perovskite single‐junction and tandem solar cells, where the prevailing challenges and future development prospects in the applications of SAMs are emphasized. We thoroughly examine the mechanistic roles of diverse SAMs in energy‐level regulation, interface modification, defect passivation, and charge transportation. This is achieved by understanding how interfacial molecular interactions can be finely tuned to mitigate charge recombination losses in inverted PSCs. Through this comprehensive review, we aim to provide valuable insights and references for further investigation and utilization of SAMs in inverted perovskite single‐junction and tandem solar cells. The self‐assembled monolayer plays a pivotal role in inverted single‐junction and tandem perovskite solar cells due to its distinctive and versatile ability to manipulate chemical and physical interface properties, serving as a key factor in charge transport, interface modification, energy‐level modulation, and defect passivation.

The article discusses the problems of controlling the relative motion of spacecraft (SC) in a tandem flight configuration. Flight configurations of two SC that form the so-called ballistically linked group and fly at a relatively small distance from each other are described. The effect of the evolution of orbital elements on the nature of the relative motion of SC in tandem is analyzed. The problems of orbit correction for maintaining the given tandem configuration are considered. Correction energy costs are estimated.

Hydrogen is one of the most widely used essential chemicals worldwide, and it is also employed in the production of many other chemicals, especially carbon-free energy fuels produced via photoelectrochemical (PEC) water splitting. At present, gallium arsenide represents the most efficient photoanode material for PEC water oxidation, but it is known to either be anodically photocorroded or photopassivated by native metal oxides in the competitive reaction, limiting efficiency and stability. Here, we report chemically etched GaAs that is decorated with thin titanium dioxide (~30 nm-thick, crystalline) surface passivation layer along with nickel-phosphate (Ni-Pi) cocatalyst as a surface hole-sink layer. The integration of Ni-Pi bifunctional co-catalyst results in a highly efficient GaAs electrode with a ~ 100 mV cathodic shift of the onset potential. In this work, the electrode also has enhanced photostability under 110 h testing for PEC water oxidation at a steady current density J ph  > 25 mA·cm −2 . The Et-GaAs/TiO 2 /Ni-Pi║Ni-Pi tandem configuration results in the best unassisted bias-free water splitting device with the highest J ph (~7.6 mA·cm −2 ) and a stable solar-to-hydrogen conversion efficiency of 9.5%. Photocorrosion limits the efficiency and stability of gallium arsenide photoanodes. Here the authors report crystalline TiO2 passivation with Ni-phosphate hole-sink layer which enables rapid charge transport for enhanced photostability of 110 h.

Redox enzymes catalyze fascinating chemical reactions with excellent regio- and stereo-specificity. Nicotinamide adenine dinucleotide cofactor is essential in numerous redox biocatalytic reactions and needs to be regenerated because it is consumed as an equivalent during the enzymatic turnover. Here we report on unbiased photoelectrochemical tandem assembly of a photoanode (FeOOH/BiVO 4 ) and a perovskite photovoltaic to provide sufficient potential for cofactor-dependent biocatalytic reactions. We obtain a high faradaic efficiency of 96.2% and an initial conversion rate of 2.4 mM h −1 without an external applied bias for the photoelectrochemical enzymatic conversion of α-ketoglutarate to l -glutamate via l -glutamate dehydrogenase. In addition, we achieve a total turnover number and a turnover frequency of the enzyme of 108,800 and 6200 h −1 , respectively, demonstrating that the tandem configuration facilitates redox biocatalysis using light as the only energy source. Photoelectrochemical (PEC) cell platforms typically need an electrical bias that drives the electron transfer from the photoanode to the photocathode. Here, the authors report a bias-free PEC tandem device for solar-driven redox biocatalysis.

A numerical study of the flow-induced vibration of two elastically mounted cylinders in tandem and staggered arrangements at Reynolds number $Re=200$ is presented. The cylinder centres are set at a streamwise distance of 1.5 cylinder diameters, placing the rear cylinder in the near-wake region of the front cylinder for the tandem arrangement. The cross-stream or lateral offset is varied between 0 and 5 cylinder diameters. The two cylinders are identical, with the same elastic mounting, and constrained to oscillate only in the cross-flow direction. The variation of flow behaviours is examined for static cylinders and for elastic mountings of a range of spring stiffnesses, or reduced velocity. At least seven major modes of flow response are identified, delineated by whether the oscillation is effectively symmetric, and the strength of the influence of the flow through the gap between the two cylinders. Submodes of these are also identified based on whether or not the flow remains periodic. More subtle temporal behaviours, such as period doubling, quasi-periodicity and chaos, are also identified and mapped. Across all of these regimes, the amplitudes of vibration and the magnitude of the fluid forces are quantified. The modes identified span the parameter space between two important limiting cases: two static bodies at varying lateral offset; and two elastically mounted bodies in a tandem configuration at varying spring stiffnesses. Some similarity in the response of extremely stiff or static bodies and extremely slack bodies is shown. This is explained by the fact that the slack bodies are free to move to an equilibrium position and stop, effectively becoming a static system. However, the most complex behaviour appears between these limits, when the bodies are in reasonably close proximity, and the natural structural frequency is close to the vortex shedding frequency of a single cylinder. This appears to be driven by the interplay between a series of time scales, including the vortex formation time, the advection time across the gap between the cylinders and the oscillation period of both bodies. This points out an important difference between this multi-body system and the classic single-cylinder vortex-induced vibration: two bodies in close proximity will not oscillate in a synchronised, periodic manner when their natural structural frequencies are close to the nominal vortex shedding frequency of a single cylinder.

Tandem configurations of two self-propelled flexible flappers of finite span are explored by means of numerical simulations. The same sinusoidal vertical motion is imposed on the leading edge of both flappers, but with a phase shift ($\\phi$). In addition, a vertical offset, $H$, is prescribed between the flappers. The configurations that emerge are characterized in terms of their hydrodynamic performance and topology. The flappers reach a stable configuration with a constant mean propulsive speed and a mean equilibrium horizontal distance. Depending on $H$ and $\\phi$, two different tandem configurations are observed, namely compact and regular configurations. The performance of the upstream flapper (i.e. the leader) is virtually equal to the performance of an isolated flapper, except in the compact configuration, where the close interaction with the downstream flapper (i.e. the follower) results in higher power requirements and propulsive speed than an isolated flapper. Conversely, the follower's performance is significantly affected by the wake of the leader in both regular and compact configurations. The analysis of the flow shows that the follower's performance is influenced by the interaction with the vertical jet induced by the vortex rings shed by the leader. This interaction can be beneficial or detrimental for the follower's performance, depending on the alignment of the jet velocity with the follower's vertical motion. Finally, a qualitative prediction of the performance of a hypothetical follower is presented. The model is semi-empirical, and it uses the flow field of an isolated flapper.

This research investigates the wake–foil interactions between two oscillating foils in a tandem configuration undergoing energy harvesting kinematics. Oscillating foils have been shown to extract hydrokinetic energy from free-stream flows through a combination of periodic heave and pitch motions, at relatively higher amplitudes and lower reduced frequency than thrust generating foils. When placed in tandem, the wake–foil interactions can govern the energy harvesting efficiency of the system due to a reduced relative flow velocity in combination with a structured and coherent wake of vortices shed from the high amplitude flapping of upstream foils. This work utilizes simulations of two tandem foils to parameterize and model the energy harvesting performance as a function of array configuration and foil kinematics. Once the wake of the leading foil has been fully parameterized, the placement, phase angle and kinematic stroke of the second foil is utilized to estimate the time-dependent power curve. The algorithm predicts the power of the second foil through the mean and unsteady wake characteristics, including the direct impingement of a vortex with the trailing foil.

While hydrodynamic interactions for aggregates of swimmers have received significant attention in the low Reynolds number realm ( $Re\\ll 1$ ), there has been far less work at higher Reynolds numbers, in which fluid and body inertia are involved. Here we study the collective behaviour of multiple self-propelled plates in tandem configurations, which are driven by harmonic flapping motions of identical frequency and amplitude. Both fast modes with compact configurations and slow modes with sparse configurations were observed. The Lighthill conjecture that orderly configurations may emerge passively from hydrodynamic interactions was verified on a larger scale with up to eight plates. The whole group may consist of subgroups and individuals with regular separations. Hydrodynamic forces experienced by the plates near their multiple equilibrium locations are all springlike restoring forces, which stabilize the orderly formation and maintain group cohesion. For the cruising speed of the whole group, the leading subgroup or individual plays the role of ‘leading goose’.

In performing skillful movement, humans use predictions from internal models formed by repetition learning. However, the computational organization of internal models in the brain remains unknown. Here, we demonstrate that a computational architecture employing a tandem configuration of forward and inverse internal models enables efficient motor learning in the cerebellum. The model predicted learning adaptations observed in hand-reaching experiments in humans wearing a prism lens and explained the kinetic components of these behavioral adaptations. The tandem system also predicted a form of subliminal motor learning that was experimentally validated after training intentional misses of hand targets. Patients with cerebellar degeneration disease showed behavioral impairments consistent with tandemly arranged internal models. These findings validate computational tandemization of internal models in motor control and its potential uses in more complex forms of learning and cognition.