Explore the vast range of titles available.

The emergence of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in 2019 has triggered an ongoing global pandemic of the severe pneumonia-like disease coronavirus disease 2019 (COVID-19) 1 . The development of a vaccine is likely to take at least 12–18 months, and the typical timeline for approval of a new antiviral therapeutic agent can exceed 10 years. Thus, repurposing of known drugs could substantially accelerate the deployment of new therapies for COVID-19. Here we profiled a library of drugs encompassing approximately 12,000 clinical-stage or Food and Drug Administration (FDA)-approved small molecules to identify candidate therapeutic drugs for COVID-19. We report the identification of 100 molecules that inhibit viral replication of SARS-CoV-2, including 21 drugs that exhibit dose–response relationships. Of these, thirteen were found to harbour effective concentrations commensurate with probable achievable therapeutic doses in patients, including the PIKfyve kinase inhibitor apilimod 2 – 4 and the cysteine protease inhibitors MDL-28170, Z LVG CHN2, VBY-825 and ONO 5334. Notably, MDL-28170, ONO 5334 and apilimod were found to antagonize viral replication in human pneumocyte-like cells derived from H9 human embryonic stem cell lines, and apilimod also demonstrated antiviral efficacy in a primary human lung explant model. Since most of the molecules identified in this study have already advanced into the clinic, their known pharmacological and human safety profiles will enable accelerated preclinical and clinical evaluation of these drugs for the treatment of COVID-19. A screen of the ReFRAME library of approximately 12,000 known drugs for antiviral activity against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) identified several candidate compounds with suitable activities and pharmacological profiles, which could potentially expedite the deployment of therapies for coronavirus disease 2019 (COVID-19).

At least 120 non-olfactory G-protein-coupled receptors in the human genome are ‘orphans’ for which endogenous ligands are unknown, and many have no selective ligands, hindering the determination of their biological functions and clinical relevance. Among these is GPR68, a proton receptor that lacks small molecule modulators for probing its biology. Using yeast-based screens against GPR68, here we identify the benzodiazepine drug lorazepam as a non-selective GPR68 positive allosteric modulator. More than 3,000 GPR68 homology models were refined to recognize lorazepam in a putative allosteric site. Docking 3.1 million molecules predicted new GPR68 modulators, many of which were confirmed in functional assays. One potent GPR68 modulator, ogerin, suppressed recall in fear conditioning in wild-type but not in GPR68-knockout mice. The same approach led to the discovery of allosteric agonists and negative allosteric modulators for GPR65. Combining physical and structure-based screening may be broadly useful for ligand discovery for understudied and orphan GPCRs. Yeast-based screening identifies the benzodiazepine drug lorazepam as a non-selective positive allosteric modulator of the G-protein-coupled receptor (GPCR) GPR68; homology modelling and molecular docking of 3.1 million molecules found a new compound, ‘ogerin’, as a potent GPR68 modulator, which suppressed recall in fear conditioning in wild-type mice, and the general method of combining physical and structure-based screening may lead to the discovery of selective ligands for other GPCRs. Finding ligands for GPCR orphans At least 120 non-olfactory G-protein-coupled receptors (GPCRs) in the human genome are 'orphans', meaning that their endogenous ligands are not known. Bryan Roth and colleagues use yeast-based screening to identify the benzodiazepine drug lorazepam as a non-selective positive allosteric modulator of GPR68, a proton receptor with no known small-molecule modulators. Homology modelling and molecular docking of 3.1 million molecules identified a new compound 'ogerin', as a potent GPR68 modulator. Ogerin suppressed recall in fear conditioning in wild-type mice. The procedures used in this work, combining physical and structure-based screening, may serve as a general method for identifying selective ligands for other GPCRs.

A detailed comparison was made of the analytical features of a new Surface Plasmon Resonance (SPR) immunodevice for triazine pesticide determination with those of two other amperometric (conventional and screen-printed) immunosensors and the advantages and disadvantages of the SPR method were thoroughly investigated. For conventional amperometric and screen-printed devices, “competitive” assays were used; conversely, the SPR transduction technique allowed a “direct” measurement format to be used. As far as the main analytical data are concerned, the SPR method does not seem to offer substantial advantages. Nevertheless the measurement time is much shorter and the measurement itself much easier to perform. Lastly several applications and recovery tests were carried out on bovine milk samples, before and after spiking, to check for triazine pesticides in the samples, obtaining satisfactory results.

Wastewater treatment plants (WWTPs) represent a major point source for pesticide residue entry to aquatic environment and may threaten ecosystems and biodiversity in urban area. Triazine herbicides should be paid attention to for their ubiquitous occurrence in the environment and long-term residue. The present study aimed to quantify eleven compounds of triazine herbicides during wastewater treatment processes. The solid phase extraction and gas-chromatography mass spectrometry (GC-MS) determination method were developed to identify the target herbicides with approving sensitivity. The pollution levels, removal rates of eleven triazine herbicides along five different treatment stages in WWTP were investigated. The results showed that three herbicides including atrazine, simetryn and prometryn were detected. Their concentrations in influent were among 28.79 to 104.60 ng/L. Their total removal rates from influent to effluent were 14.92%, 10.79% and 4.41%, respectively indicating that they were difficult to be effectively remove during wastewater treatment. Regarding the negative impact of triazine herbicides discharged from WWTPs on downstream water quality and aquatic life, the environmental risks were assessed by calculating the Environmental Relevance of Pesticides from Wastewater Treatment Plants Index (ERPWI) and water cycle spreading index (WCSI). The risk assessment results denoted the possible high risks for atrazine and simetryn to alage, and simetryn concurrently posed a high risk for the daphnia, while prometryn was at medium risk to alage. Atrazine and simetryn in effluent posed high risk for algae, meanwhile, simetryn had high risk for Daphnia. These results suggested a possible threat to the aquatic environment, rendering in this way the ERPWI method as a useful assessment tool. Further extensive study is needed for atrazine and simetryn in order to better understand their migration mechanism in aquatic environment.

The occurrence and distribution of 157 pesticides were investigated in surface water and sediment in Jiangsu Province, China. Gas chromatography–mass spectrometry was used to analyze and quantify these pesticides, and the risk quotient method was used to evaluate their respective environmental risk. The results showed that 91 pesticides were detected in surface water. The organophosphates (OPPs), fungicides, and amide herbicides were predominant. The total concentration in surface water ranged from 63.7 to 22,463 ng/L, 3.90 to 7262 ng/L, and ND to 34,120 ng/L, respectively. The mean concentration was 3479 ng/L, 1644 ng/L, and 1878 ng/L, respectively. The concentration range of detected pesticides in the Yangtze River Basin was generally lower than that in the Huai River Basin. In sediment samples, a total of 63 pesticides were detected. OPPs and amide herbicides were also ranked highest; the total concentration in sediment samples ranged from 2951 to 47,739 ng/g and 106 to 12,996 ng/g, respectively. And the mean concentrations was 6971 ng/g and 5130 ng/g, respectively. Suqian City had the highest concentration for OPPs and amide herbicides in the Huai River Basin, followed by Huai’an City, while Nanjing City and Yangzhou City ranked highest in the Yangtze River Basin. The spatial distribution of pesticides in Jiangsu Province indicated a concentration significantly higher in the western and northern regions than in the eastern and southern regions, and a concentration generally higher in lakes than in rivers. The risk assessment results showed that OPPs, fungicides, amide herbicides, organochlorines, and triazine herbicides in most surface water samples posed a high risk and had regional pollution characteristics. In sediment samples, organochlorines, carbamates, other herbicides, and other insecticides posed a high risk in northern Jiangsu Province, whereas OPPs, amide herbicides, and triazine herbicides posed high risks everywhere in Jiangsu Province.

Background: A major food safety incident in China was made public in September 2008. Kidney and urinary tract effects, including kidney stones, affected about 300,000 Chinese infants and young children, with six reported deaths. Melamine had been deliberately added at milk-collecting stations to diluted raw milk ostensibly to boost its protein content. Subsequently, melamine has been detected in many milk and milk-containing products, as well as other food and feed products, which were also exported to many countries worldwide. Objectives: The melamine event represents one of the largest deliberate food contamination incidents. We provide a description and analysis of this event to determine the global implications on food and feed safety. Discussions: A series of factors, including the intentional character of the milk contamination, the young age of the population affected, the large number of potentially contaminated products, the global distribution of these products, and the delay in reporting led this event to take on unexpected proportions. This incident illustrated the complexity of international trade of food products and food ingredients that required immediate actions at international level. Conclusion: Managing food-safety events should be done internationally and early on as soon as multinational consequences are expected. Collaboration between food-safety authorities worldwide is needed to efficiently exchange information and to enable tracking and recalling of affected products to ensure food safety and to protect public health.

The release of melamine and formaldehyde from kitchenware made of melamine resins is still a matter of great concern. To investigate the migration and release behavior of the monomers from melamine-based food contact materials into food simulants and food stuffs, cooking spoons were tested under so-called hot plate conditions at 100 °C. Release conditions using the real hot plate conditions with 3% acetic acid were compared with conditions in a conventional migration oven and with a release to deionized water. Furthermore, the kinetics of the release were studied using Arrhenius plots giving an activation energy for the release of melamine of 120 kJ/mol. Finally, a correlation between quality of the resins, specifically the kind of bridges between the monomers, and the release of melamine, was confirmed by CP/MAS 13C-NMR measurements of the melamine kitchenware. Obviously, the ratio of methylene bridges and dimethylene ether bridges connecting the melamine monomers during the curing process can be directly correlated with the amount of the monomers released into food.

To assess the environmental impact of training activities, surface soil was systematically collected at 3 training ranges (designated as A, B1, B2) located along the southeast coast of Guangdong, China. Analytical results of energetic compounds (ECs) in soil revealed that 2,4,6-trinitrotoluene (TNT) was the predominant ECs, with a mean concentration of 234 ng/g. The detection rate for Hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) was over 50%, peaking at 710 ng/g. Heavy metal analysis demonstrated significant enrichment of cadmium (Cd), mercury (Hg), lead (Pb), copper (Cu), and arsenic (As) in soil. Particularly noteworthy were the Cu and Pb concentrations in range B2, reaching maximum levels of 259 mg/kg and 801 mg/kg, respectively. Metal enrichment was predominantly attributed to metallic components and shrapnel fragments originating from explosive materials. Field investigations indicated that metallic fragments dispersed in surface soils exhibited limited weathering, with iron (Fe) constituting the primary metallic element, accompanied by trace amounts of chromium (Cr). The quantitative analysis of ECs and heavy metals concentrations suggests a clear trend of environmental accumulation. These findings underscore the necessity for implementing long-term environmental monitoring programs and conducting comprehensive risk assessments to evaluate potential ecological risks related to military training activities. Graphic Abstract

A novel method was developed to determine six triazine herbicides from brown sugar samples using matrix solid-phase dispersion (MSPD) based on silica gel impregnated with deep eutectic solvent (DES) followed by high-performance liquid chromatography with photodiode array detector (HPLC/PDA). Several factors involved in the MSPD procedure such as DES type, DES content in impregnated silica gel, adsorbent-to-sample mass ratio, type and volume of washing solvent, type and volume of eluent, and grinding time were screened using single-factor experiments and then optimized using Box-Behnken design to accomplish the highest recoveries. The above method demonstrated a good linear range (20–1000 μg kg−1) with a determination coefficient exceeding 0.9962, low limits of determination (1.59–3.77 μg kg−1), acceptable limits of quantifications, and acceptable spiking recoveries (95.0–101.7%) for six triazines under optimized conditions. The proposed MSPD-HPLC/PDA method is a convenient, effective, and sensitive method for rapidly isolating and quantifying six triazines from brown sugar.

Food adulteration with melamine represents a serious threat to food safety due to its toxic effects and its ability to falsely elevate protein values measured by nitrogen-based methods. Visual inspection and visible reflectance spectroscopy are unsuitable for identifying low-level adulteration. This study evaluates Fourier Transform Infrared (FTIR) spectroscopy combined with chemometric tools for the identification of melamine in brown rice flour adulterated at 0-2.00% ( / ). Under the tested conditions, no clear FTIR-detectable interactions between melamine and starch or proteins were observed, suggesting that melamine primarily acts as a physical admixture. Characteristic melamine absorption bands were identified at 3466, 3415, 1431, and 810 cm . Spectral normalization and second-order derivative processing improved sensitivity and enabled quantitative calibration models. The method achieved a limit of detection of 1408 mg/kg. Although this value is above the regulatory threshold of 2.5 mg/kg, the approach provides a rapid, non-destructive screening tool for identifying highly adulterated samples and prioritizing them for confirmatory chromatographic or mass spectrometric analysis. Overall, FTIR spectroscopy combined with chemometric analysis offers an efficient first-line approach for identification of melamine adulteration in brown rice flour.