Explore the vast range of titles available.

In this study, the effect of polyethylene glycol 8000 (PEG8000) stress on cellulase biosynthesis in Trichoderma reesei CICC2626 via calcium signaling was investigated, and a plausible mechanism by which intracellular Ca 2+ regulates the transcription of cellulase genes was proposed. The results indicated that the total cellulase (filter paper-hydrolyzing activity [FPase]), endoglucanase (carboxymethyl cellulase activity [CMCase]), and β-glucosidase activities of the strain were 1.3-, 1.2-, and 1.3-fold higher than those of the control (no PEG8000 addition) at a final concentration of 1.5% (w/v) PEG8000. Moreover, the transcriptional levels of cellulase genes, protein concentrations, and biomass increased. With the synergistic use of commercial cellulase and T. reesei CICC2626 cellulase to hydrolyze alkali-pretreated rice straw, the released reducing sugar concentration reached 372.7 mg/g, and the cellulose content (22.7%, 0.32 g) was significantly lower than the initial content (62.5%, 1.88 g). Transcriptome data showed that 12 lignocellulose degradation–related genes were significantly upregulated in the presence of 1.5% PEG8000. Furthermore, the addition of Ca 2+ inhibitors and deletion of crz1 (calcineurin-responsive zinc finger 1-encoding gene, which is related to the calcium signaling pathway) demonstrated that calcium signaling plays a dominant role in PEG8000-induced cellulase genes overexpression. These results revealed a link between PEG8000 induction and calcium signaling transduction in T. reesei CICC2626. Moreover, this study also provides a novel inducer for enhanced cellulase production. Key points • Cellulase biosynthesis in Trichoderma reesei could be enhanced by PEG8000 • PEG8000 could induce a cytosolic Ca 2+ burst in Trichoderma reesei • The activated calcium signaling was involved in cellulase biosynthesis Graphical abstract

Abstract Background: The ascomycete fungus, Trichoderma reesei (anamorph of Hypocrea jecorina ), represents a biotechnological workhorse and is currently one of the most proficient cellulase producers. While strain improvement was traditionally accomplished by random mutagenesis, a detailed understanding of cellulase regulation can only be gained using recombinant technologies. Results: Aiming at high efficiency and high throughput methods, we present here a construction kit for gene knock out in T. reesei . We provide a primer database for gene deletion using the pyr4, amdS and hph selection markers. For high throughput generation of gene knock outs, we constructed vectors using yeast mediated recombination and then transformed a T. reesei strain deficient in non-homologous end joining (NHEJ) by spore electroporation. This NHEJ-defect was subsequently removed by crossing of mutants with a sexually competent strain derived from the parental strain, QM9414. Conclusions: Using this strategy and the materials provided, high throughput gene deletion in T. reesei becomes feasible. Moreover, with the application of sexual development, the NHEJ-defect can be removed efficiently and without the need for additional selection markers. The same advantages apply for the construction of multiple mutants by crossing of strains with different gene deletions, which is now possible with considerably less hands-on time and minimal screening effort compared to a transformation approach. Consequently this toolkit can considerably boost research towards efficient exploitation of the resources of T. reesei for cellulase expression and hence second generation biofuel production.

This study evaluated the production of cellulolytic enzymes from different agricultural residues. The crude enzyme extract produced was characterized and applied for saccharification of some agricultural residues. Maximum cellulolytic activities were obtained using soybean hulls. All enzymatic activities were highly stable at 40 °C at a pH range of 4.5–5.5. For stability at low temperatures, the enzyme extract was stored at freezing temperature and cooling for about 290 days without major loss of activity. The Km values found for total cellulase (FPase), endoglucanase (CMCase), and xylanase were 19.73 mg ml−1, 0.65 mg ml−1, and 22.64 mg ml−1, respectively, and Vmax values were 0.82 mol min−1 mg−1, 0.62 mol min−1 mg−1, and 104.17 mol min−1 mg−1 to cellulose, carboxymethyl cellulose, and xylan, respectively. In the saccharification tests, the total amount of total reducing sugars (TRS) released from 1 g of soybean hulls catalyzed by the enzymes present in the crude enzyme extract was 0.16 g g−1 dry substrate.

Background Cellobiohydrolase from glycoside hydrolase family 7 is a major component of commercial enzymatic mixtures for lignocellulosic biomass degradation. For many years, Trichoderma reesei Cel7A (TrCel7A) has served as a model to understand structure–function relationships of processive cellobiohydrolases. The architecture of TrCel7A includes an N-glycosylated catalytic domain, which is connected to a carbohydrate-binding module through a flexible, O-glycosylated linker. Depending on the fungal expression host, glycosylation can vary not only in glycoforms, but also in site occupancy, leading to a complex pattern of glycans, which can affect the enzyme’s stability and kinetics. Results Two expression hosts, Aspergillus oryzae and Trichoderma reesei, were utilized to successfully express wild-types TrCel7A (WTAo and WTTr) and the triple N-glycosylation site deficient mutants TrCel7A N45Q, N270Q, N384Q (ΔN-glycAo and ΔN-glycTr). Also, we expressed single N-glycosylation site deficient mutants TrCel7A (N45QAo, N270QAo, N384QAo). The TrCel7A enzymes were studied by steady-state kinetics under both substrate- and enzyme-saturating conditions using different cellulosic substrates. The Michaelis constant (KM) was consistently found to be lowered for the variants with reduced N-glycosylation content, and for the triple deficient mutants, it was less than half of the WTs’ value on some substrates. The ability of the enzyme to combine productively with sites on the cellulose surface followed a similar pattern on all tested substrates. Thus, site density (number of sites per gram cellulose) was 30–60% higher for the single deficient variants compared to the WT, and about twofold larger for the triple deficient enzyme. Molecular dynamic simulation of the N-glycan mutants TrCel7A revealed higher number of contacts between CD and cellulose crystal upon removal of glycans at position N45 and N384. Conclusions The kinetic changes of TrCel7A imposed by removal of N-linked glycans reflected modifications of substrate accessibility. The presence of N-glycans with extended structures increased KM and decreased attack site density of TrCel7A likely due to steric hindrance effect and distance between the enzyme and the cellulose surface, preventing the enzyme from achieving optimal conformation. This knowledge could be applied to modify enzyme glycosylation to engineer enzyme with higher activity on the insoluble substrates.

The sustainable development of the drylands, i.e., regions with limited availability of water, depends on the exploitation of the few biomass types that can thrive in such conditions, such as the Opuntia ficus-indica, a plant of the Cactaceae family. In the present study, the cladodes of O. ficus-indica were used as a substrate by the fungus Trichoderma reesei CCT-2768 for the production of cellulolytic enzymes through solid-state fermentation. Firstly, the extraction of the mucilage, soluble components of industrial interest, was evaluated. Temperature, water-to-biomass ratio, and time of mixture were varied using an experimental design and impacted, especially, the pectin removal. Then, the lignocellulosic residue was used for the production of enzymes; the effect of the water activity, biomass pretreatment, mineral supplementation, temperature, and inoculum size on the enzymatic production were investigated using two sets of experimental designs. The steam explosion pretreatment exposed the fiber to the microbial action and boosted the enzyme production, provided that the medium was supplemented with salts. This combination has improved the production of xylanase, CMCase, FPase, and polygalacturonase by 27, 62, 98, and 185%, respectively. The temperature of 35 °C was determined as the optimal for the production of FPase, xylanase, and polygalacturonase, while no effect was observed on the production of CMCase and β-glucosidase. The optimization of the enzymatic production performed in this study can potentially provide a new application for the Opuntia biomass and improve the sustainable development of the drylands.

Background Molecular-scale mechanisms of the enzymatic breakdown of cellulosic biomass into fermentable sugars are still poorly understood, with a need for independent measurements of enzyme kinetic parameters. We measured binding times of cellobiohydrolase Trichoderma reesei Cel7A (Cel7A) on celluloses using wild-type Cel7A (WTintact), the catalytically deficient mutant Cel7A E212Q (E212Qintact) and their proteolytically isolated catalytic domains (CD) (WTcore and E212Qcore, respectively). The binding time distributions were obtained from time-resolved, super-resolution images of fluorescently labeled enzymes on cellulose obtained with total internal reflection fluorescence microscopy. Results Binding of WTintact and E212Qintact on the recalcitrant algal cellulose (AC) showed two bound populations: ~ 85% bound with shorter residence times of < 15 s while ~ 15% were effectively immobilized. The similarity between binding times of the WT and E212Q suggests that the single point mutation in the enzyme active site does not affect the thermodynamics of binding of this enzyme. The isolated catalytic domains, WTcore and E212Qcore, exhibited three binding populations on AC: ~ 75% bound with short residence times of ~ 15 s (similar to the intact enzymes), ~ 20% bound for < 100 s and ~ 5% that were effectively immobilized. Conclusions Cel7A binding to cellulose is driven by the interactions between the catalytic domain and cellulose. The cellulose-binding module (CBM) and linker increase the affinity of Cel7A to cellulose likely by facilitating recognition and complexation at the substrate interface. The increased affinity of Cel7A to cellulose by the CBM and linker comes at the cost of increasing the population of immobilized enzyme on cellulose. The residence time (or inversely the dissociation rates) of Cel7A on cellulose is not catalysis limited.

Background The degradation of cellulose and hemicellulose molecules into simpler sugars such as glucose is part of the second generation biofuel production process. Hydrolysis of lignocellulosic substrates is usually performed by enzymes produced and secreted by the fungus Trichoderma reesei . Studies identifying transcription factors involved in the regulation of cellulase production have been conducted but no overview of the whole regulation network is available. A transcriptomic approach with mixtures of glucose and lactose, used as a substrate for cellulase induction, was used to help us decipher missing parts in the network of T. reesei Rut-C30. Results Experimental results on the Rut-C30 hyperproducing strain confirmed the impact of sugar mixtures on the enzymatic cocktail composition. The transcriptomic study shows a temporal regulation of the main transcription factors and a lactose concentration impact on the transcriptional profile. A gene regulatory network built using BRANE Cut software reveals three sub-networks related to i ) a positive correlation between lactose concentration and cellulase production, i i ) a particular dependence of the lactose onto the β -glucosidase regulation and i i i ) a negative regulation of the development process and growth. Conclusions This work is the first investigating a transcriptomic study regarding the effects of pure and mixed carbon sources in a fed-batch mode. Our study expose a co-orchestration of xyr1 , clr2 and ace3 for cellulase and hemicellulase induction and production, a fine regulation of the β -glucosidase and a decrease of growth in favor of cellulase production. These conclusions provide us with potential targets for further genetic engineering leading to better cellulase-producing strains in industry-like conditions.

In this study, the major secretome components of Penicillium oxalicum 16 and Trichoderma reesei RUT-C30 under wheat bran (WB) and rice straw (RS) solid-state fermentation were systematically analyzed. The activities of the major components, e.g., cellulase, hemicellulase, and amylase, were consistent with their abundance in the secretomes. P. oxalicum 16 secreted more abundant glycoside hydrolases than T. reesei RUT-C30. The main up-regulated proteins from the induction of WB, compared with that from RS, were amylase, pectinase, and protease, whereas the main down-regulated enzymes were cellulase, hemicellulase, swollenin, and lytic polysaccharide monooxygenase (LPMO). Specifically, WB induced more β-1,4-glucosidases, namely, S8B0F3 (UniProt ID), and A0A024RWA5 than RS, but RS induced more β-1,4-exoglucanases and β-1,4-endoglucanases, namely, A0A024RXP8, A024SH76, S7B6D6, S7ZP52, A024SH20, A024S2H5, S8BGM3, S7ZX22, and S8AIJ2. The P. oxalicum 16 xylanases S8AH74 and S7ZA57 were the major components responsible for degrading soluble xylan, and S8BDN2 probably acted on solid-state hemicellulose instead of soluble xylan. The main hemicellulase component of T. reesei RUT-C30 in RS was the xyloglucanase A0A024S9Z6 with an abundance of 16%, but T. reesei RUT-C30 lacked the hemicellulase mannanase and had a small amount of the hemicellulase xylanase. P. oxalicum 16 produced more amylase than T. reesei RUT-C30, and the results suggest amylase S7Z6T2 may degrade soluble starch. The percentage of the glucoamylase S8B6D7 did not significantly change, and reached an average abundance of 5.5%. The major auxiliary degradation enzymes of P. oxalicum 16 were LPMOs S7Z716 and S7ZPW1, whereas those of T. reesei RUT-C30 were swollenin and LPMOs A0A024SM10, A0A024SFJ2, and A0A024RZP7.

Efficient biodegradation of lignocellulosic biomass needs a battery of enzymes targeting cellulose, hemicellulose, and lignin. In this study, recombinant Trichoderma reesei ZJ-09 with Pycnoporus sanguineus laccase gene was used to degrade rice straw by in situ production of laccase, xylanase, and cellulases under solid-state fermentation (SSF). Effects of parameters on key enzymes (cellulase, xylanase, and laccase) in biodegradation during SSF were investigated. Under the optimized SSF conditions, the FPA, xylanase activity, and laccase activity reached 110.47 FPU/g, 5787.59 IU/g, and 24.45 IU/g, respectively, on day 12. The obtained recombinant T. reesei SSF system achieved efficient degradation of rice straw with the final mass loss up to 51.16% which was 1.4-fold higher than the host strain. Further, bioconversion of rice straw into a novel laccase-enriched koji for persistent organic pollutants bioremediation (LKPB) was conducted by the optimized SSF system. LKPB was found to degrade persistent organic pollutants (POPs) effectively without the addition of mediators. 4-h removal rates of three POPs mediated by LKPB (87.21% for 2,4,5-trichlorophenol, 92.45% for nonylphenol, and 90.73% for oxytetracycline) were comparable to those achieved by laccase-co-mediator system. The newly established recombinant T. reesei SSF system could be potential to effectively degrade lignocellulosic wastes as well as organic pollutants.

The auxiliary activity family 9 (AA9, formerly GH61) harbors a recently discovered group of oxidative enzymes that boost cellulose degradation. Indeed, these lytic polysaccharide monooxygenases (LPMOs) are able to disrupt the crystalline structure of cellulose, thereby facilitating the work of hydrolytic enzymes involved in biomass degradation. Since these enzymes require an N-terminal histidine residue for activity, their recombinant production as secreted protein is not straightforward. We here report the expression optimization of Trichoderma reesei Cel61A (TrCel61A) in the host Pichia pastoris. The use of the native TrCel61A secretion signal instead of the alpha-mating factor from Saccharomyces cerevisiae was found to be crucial, not only to obtain high protein yields (>400 mg/L during fermentation) but also to enable the correct processing of the N-terminus. Furthermore, the LPMO activity of the enzyme is demonstrated here for the first time, based on its degradation profile of a cellulosic substrate.