Explore the vast range of titles available.

The explosive 2,4,6-trinitrotoluene (TNT) is a highly toxic and persistent environmental pollutant. Due to the scale of affected areas, one of the most cost-effective and environmentally friendly means of removing explosives pollution could be the use of plants. However, mechanisms of TNT phytotoxicity have been elusive. Here, we reveal that phytotoxicity is caused by reduction of TNT in the mitochondria, forming a nitro radical that reacts with atmospheric oxygen, generating reactive superoxide. The reaction is catalyzed by monodehydroascorbate reductase 6 (MDHAR6), with Arabidopsis deficient in MDHAR6 displaying enhanced TNT tolerance. This discovery will contribute toward the remediation of contaminated sites. Moreover, in an environment of increasing herbicide resistance, with a shortage in new herbicide classes, our findings reveal MDHAR6 as a valuable plant-specific target.

The explosive 2,4,6-trinitrotoluene (TNT) is a significant, global environmental pollutant that is both toxic and recalcitrant to degradation. Given the sheer scale and inaccessible nature of contaminated areas, phytoremediation may be a viable clean-up approach. Here, we have characterized a Drosophila melanogaster glutathione transferase (DmGSTE6) which has activity towards TNT. Recombinantly expressed, purified DmGSTE6 produces predominantly 2-glutathionyl-4, 6-dinitrotoluene, and has a 2.5-fold higher Maximal Velocity (V max), and five-fold lower Michaelis Constant (K m) than previously characterized TNT-active Arabidopsis thaliana (Arabidopsis) GSTs. Expression of DmGSTE6 in Arabidopsis conferred enhanced resistance to TNT, and increased the ability to remove TNT from contaminated soil relative to wild-type plants. Arabidopsis lines overexpressing TNT-active GSTs AtGST-U24 and AtGST-U25 were compromised in biomass production when grown in the absence of TNT. This yield drag was not observed in the DmGSTE6-expressing Arabidopsis lines. We hypothesize that increased levels of endogenous TNT-active GSTs catalyse excessive glutathionylation of endogenous substrates, depleting glutathione pools, an activity that DmGST may lack. In conclusion, DmGSTE6 has activity towards TNT, producing a compound with potential for further biodegradation. Selecting or manipulating plants to confer DmGSTE6-like activity could contribute towards development of phytoremediation strategies to clean up TNT from polluted military sites.

Two new azaheterocycle-based bolas, such as (1-(4-(5-phenyl-1,3,4-oxadiazol-2-yl)phenyl)-1 -1,2,3-triazol-4-yl)-methylenyls α,ω-bisfunctionalized PEGs, were prepared via Cu-catalyzed click reaction between 2-(4-azidophenyl)-5-(aryl)-oxadiazole-1,3,4 and terminal ethynyls derived from PEG-3 and PEG-4. Due to the presence of two heteroaromatic cores and a PEG linker, these bola molecules are considered as promising fluorescent chemosensors for electron-deficient species. As a result of a well-pronounced \"turn-off\" fluorescence response towards common nitro-explosive components, such as 2,4-dinitrotoluene (DNT) and 2,4,6-trinitrotoluene (TNT), hard-to-detect pentaerythritol tetranitrate (PETN), as well as Hg cation was observed.

Explosives are a common soil contaminant at a range of sites, including explosives manufacturing plants and areas associated with landmine detonations. As many explosives are toxic and may cause adverse environmental effects, a large body of research has targeted the remediation of explosives residues in soil. Studies in this area have largely involved spiking 'pristine' soils using explosives solutions. Here we investigate the fate of explosives present in soils following an actual detonation process and compare this to the fate of explosives spiked into 'pristine' undetonated soils. We also assess the effects of the detonations on the physical properties of the soils. Our scanning electron microscopy analyses reveal that detonations result in newly-fractured planes within the soil aggregates, and novel micro Computed Tomography analyses of the soils reveal, for the first time, the effect of the detonations on the internal architecture of the soils. We demonstrate that detonations cause an increase in soil porosity, and this correlates to an increased rate of TNT transformation and loss within the detonated soils, compared to spiked pristine soils. We propose that this increased TNT transformation is due to an increased bioavailability of the TNT within the now more porous post-detonation soils, making the TNT more easily accessible by soil-borne bacteria for potential biodegradation. This new discovery potentially exposes novel remediation methods for explosive contaminated soils where actual detonation of the soil significantly promotes subsequent TNT degradation. This work also suggests previously unexplored ramifications associated with high energy soil disruption.

Microbes can be engineered to sense target chemicals for environmental and geospatial detection. However, when engineered microbes operate in real-world environments, it remains unclear how competition with natural microbes affect their performance over long time periods. Here, we engineer sensors and memory-storing genetic circuits inside the soil bacterium Bacillus subtilis to sense the TNT explosive and maintain a long-term response, using predictive models to design riboswitch sensors, tune transcription rates, and improve the genetic circuit’s dynamic range. We characterize the autonomous microbial sensor’s ability to detect TNT in a natural soil system, measuring single-cell and population-level behavior over a 28-day period. The autonomous microbial sensor activates its response by 14-fold when exposed to low TNT concentrations and maintains stable activation for over 21 days, exhibiting exponential decay dynamics at the population-level with a half-life of about 5 days. Overall, we show that autonomous microbial sensors can carry out long-term detection of an important chemical in natural soil with competitive growth dynamics serving as additional biocontainment. Engineered microbes can detect harmful chemicals, but may not work well in complex environments. Here, the authors built microbial sensors for detection of TNT explosive and tested their response over 28 days in contaminated soil with many natural microbes, achieving stable detection for 21 days.

Photolysis is one of the main transformation pathways for 2,4,6-trinitrotoluene (TNT) released into the environment. Upon exposure to sunlight, TNT is known to undergo both oxidation and reduction reactions with release of nitrite, nitrate, and ammonium ions, followed by condensation reactions of the oxidation and reduction products. In this study, compound classes of transformation products from the aqueous and solid phase photodegradation of 2,4,6-trinitrotoluene (TNT) have been identified by liquid and solid state 13C and 15N NMR. Aqueous phase experiments were performed on saturated solutions of T15NT in deionized water, natural pond water (pH = 8.3, DOC = 3.0 mg/L), pH 8.0 buffer solution, and in the presence of Suwannee River Natural Organic Matter (SRNOM; pH = 3.7), using a Pyrex-filtered medium pressure mercury lamp. Natural sunlight irradiations were performed on TNT in the solid phase and dissolved in the pond water. In deionized water, carboxylic acid, aldehyde, aromatic amine, primary amide, azoxy, nitrosophenol, and azo compounds were formed. 15N NMR spectra exhibited major peaks centered at 128 to 138 ppm, which are in the range of phenylhydroxylamine and secondary amide nitrogens. The secondary amides are proposed to represent benzanilides, which would arise from photochemical rearrangement of nitrones formed from the condensation of benzaldehyde and phenylhydroxylamine derivatives of TNT. The same compound classes were formed from sunlight irradiation of TNT in the solid phase. Whereas carboxylic acids, aldehydes, aromatic amines, phenylhydroxylamines, and amides were also formed from irradiation of TNT in pond water and in pH 8 buffer solution, azoxy and azo compound formation was inhibited. Solid state 15N NMR spectra of photolysates from the lamp irradiation of unlabeled 2,6-dinitrotoluene in deionized water also demonstrated the formation of aromatic amine, phenylhydroxylamine/ 2° amide, azoxy, and azo nitrogens.

We demonstrated an electrochemical microscopy technique based on the detection of variations in local electrochemical current from optical signals arising from surface plasmon resonance. It enables local electrochemical measurements (such as voltammetry and amperometry) with high spatial resolution and sensitivity, because the signal varies with current density rather than current. The imaging technique is noninvasive, scanning-free, and fast, and it constitutes a powerful tool for studying heterogeneous surface reactions and for analyzing trace chemicals.

We report high-sensitivity detection of 2,4,6-trinitrotoluene (TNT) by using laser photoacoustic spectroscopy where the laser radiation is obtained from a continuous-wave room temperature high-power quantum cascade laser in an external grating cavity geometry. The external grating cavity quantum cascade laser is continuously tunable over [almost equal to]400 nm around 7.3 μm and produces a maximum continuous-wave power of [almost equal to]200 mW. The IR spectroscopic signature of TNT is sufficiently different from that of nitroglycerine so that unambiguous detection of TNT without false positives from traces of nitroglycerine is possible. We also report the results of spectroscopy of acetylene in the 7.3-μm region to demonstrate continuous tunability of the IR source.

This paper describes the nitration of 2,4-dinitrotoluene (DNT) and its conversion to 2,4,6-trinitrotoluene (TNT) at a gram scale with the use of a fully automated flow chemistry system. The conversion of DNT to TNT traditionally requires the use of highly hazardous reagents like fuming sulfuric acid (oleum), fuming nitric acid (90–100%), and elevated temperatures. Flow chemistry offers advantages compared to conventional syntheses including a high degree of safety and simpler multistep automation. The configuration and development of this automated process based on a commercially available flow chemistry system is described. A high conversion rate (>99%) was achieved. Unlike established synthetic methods, ordinary nitrating mixture (65% HNO3/98% H2SO4) and shorter reaction times (10–30 min) were applied. The viability of flow nitration as a means of safe and continuous synthesis of TNT was investigated. The method was optimized using an experimental design approach, and the resulting process is safer, faster, and more efficient than previously reported TNT synthesis procedures. We compared the flow chemistry and batch approaches, including a provisional cost calculation for laboratory-scale production (a thorough economic analysis is, however, beyond the scope of this article). The method is considered fit for purpose for the safe production of high-purity explosives standards at a gram scale, which are used to verify that the performance of explosive trace detection equipment complies with EU regulatory requirements.