Explore the vast range of titles available.

In this research, thermal and water vapor resistance, components of thermal comfort of 65/35 and 33/67% polyester/ cotton (PES/CO) blend fabrics woven with 2/2 twill, matt twill, cellular and diced weaves, which are commonly used for clothing, were determined. The results indicate that both the fabric construction and the constituent fiber properties affect thermal comfort properties of clothing woven fabrics. Cellular weave, which is derivative of sateen weave and diced weave, which is compound weave, has the highest thermal resistance appropriating for cold climatic conditions. On the other hand, the 2/2 twill weave and matt twill weave, which is derivative of sateen weave, depicted the lowest water vapor thermal resistance, making it convenient for hot climatic conditions. Besides, fabrics woven with 65/35% PES/CO blend yarns have higher thermal resistance, so they are suitable for cold climatic conditions. Fabrics woven with 33/67% PES/CO blend yarns have lower water vapor resistance, so they are convenient for hot climatic conditions.

This paper provides a review of recent studies on the weave factor along with the effect of weave parameters and particularly the weave structure on various properties of woven fabric. The weave structure can be considered as one of the prime parameters that contributes to the dominant physical and qualitative properties of the woven fabric. This study analyzed not only the parameters that significantly influence the properties of the woven fabric, but also the weave factors for the estimation of the weave that were proposed by earlier scientists. This review paper highlights the impact of weave structure on the physical and mechanical, thermo-physiological and comfort properties, and some special application properties of woven fabrics. This work seeks to serve as a future reference for related research.

Over the last decade, the progressive application of natural fibres in polymer composites has had a major effect in alleviating environmental impacts. Recently, there is a growing interest in the development of green materials in a woven form by utilising natural fibres from lignocellulosic materials for many applications such as structural, non-structural composites, household utilities, automobile parts, aerospace components, flooring, and ballistic materials. Woven materials are one of the most promising materials for substituting or hybridising with synthetic polymeric materials in the production of natural fibre polymer composites (NFPCs). These woven materials are flexible, able to be tailored to the specific needs and have better mechanical properties due to their weaving structures. Seeing that the potential advantages of woven materials in the fabrication of NFPC, this paper presents a detailed review of studies related to woven materials. A variety of factors that influence the properties of the resultant woven NFRC such as yarn characteristics, fabric properties as well as manufacturing parameters were discussed. Past and current research efforts on the development of woven NFPCs from various polymer matrices including polypropylene, polylactic acid, epoxy and polyester and the properties of the resultant composites were also compiled. Last but not least, the applications, challenges, and prospects in the field also were highlighted.

Fabric strength plays a crucial role in determining and influencing all other performance attributes of textiles. Therefore, considering the strength of the fabric becomes essential when choosing the appropriate textile for a specific purpose. This article presents an experimental study that focusses on the properties of 100% polyester fabrics. To conduct this study, we created ten fabrics with different weave structures, resulting in a total of 200 samples for tensile strength testing. Moving on to the second phase, we analysed the physical and constructional characteristics of the fabrics, including the number of warp and weft threads, warp and weft density, and weight. This analysis was carried out based on the weave structures. Additionally, we performed tensile strength tests in both warp and weft directions to examine the mechanical properties of the fabrics. Finally, a statistical analysis was performed to determine the impact of the weave structures on the tensile strength of the fabrics.

This study investigates the influence of weaving process parameters on the structural homogeneity of woven fabrics, with a focus on the structural autoregulation phenomenon. Two experimental fabric groups of 30 each, plain and twill weaves, were produced using varied loom settings: shed closure timing, lease rod position, backrest roller position, warp pre-tension, and yarn twist direction. Structural uniformity was assessed using a proprietary method and the MagFABRIC 2.1. image analysis system, which quantify intra-repeat, inter-repeat, and global inhomogeneity. This method uses the size, shape, and location of inter-thread pores as well as warp and weft pitches. The results indicate that autoregulation can reduce local structural disturbances, including warp yarn grouping. In plain weaves, loom parameters and humidity significantly contributed to structural autoregulation. In contrast, twill weaves demonstrated dominant internal feedback mechanisms, significantly influenced by yarn twist direction. Regression models at F = 10 revealed nonlinear interactions, confirming autoregulation and experimentally supporting Nosek’s quasi-dynamic theory for these types of fabrics. The results of these studies have practical relevance in high-performance textiles such as filtration, barrier fabrics, and composite reinforcements, where local structural deviations critically affect the functional properties of fabrics.

The double-weave structure of a fabric allows for the use of different materials and weave structures for the upper and lower layer, which can be advantageous in the functionalization of 3D printed textiles. Therefore, the aim of this research was to investigate the influence of simple and double-weave structures on the adhesion of 3D printed fabrics. From this perspective, we investigated the influence of different twill derivates and weft densities on the adhesion force. We produced fabrics specifically for this study and printed them with a polylactic acid filament using Fused Deposition Modeling technology. The T-peel test was performed to measure the adhesion, and the results were statistically analyzed. A morphological study of the surfaces and cross-sections of the 3D printed fabrics helped us interpret the results. We found that adhesion was higher for double fabrics when printed with a smaller z-distance, where the molten polymer reached the lower layer of the fabric and adhered to it. The opposite was confirmed when printing with a larger z-distance, where adhesion was higher for simple fabrics. Both weave and density had a significant effect on adhesion in all cases. Surprisingly, different twill derivatives generally had a greater influence on adhesion than density.

Water transfer through porous textiles consists of two sequential processes: synchronous wicking–evaporating and evaporating alone. In this work we set out to identify the main structural parameters affecting the water transfer process of cotton fabrics. Eight woven fabrics with different floats were produced. The fabrics were evaluated on a specially designed instrument capable of measuring the water loss through a vertical wicking process. Each test took 120 min, and two phases were defined: Phase I for the first 10 min and Phase II for the last 110 min according to wicking behavior transition. Principal components and multivariate statistical methods were utilized to analyze the data collected. The results showed that Phase I dominated the whole wicking–evaporating process, and the moisture transfer speed in this phase varied with fabric structure, whereas the moisture transfer speeds in Phase II were similar and constant regardless of fabric structure. In addition, fabric with more floats has high water transfer speed in Phase I due to its loosened structure with more macropores.

The deformation properties of woven textile materials depend on several factors. The main factors are the physical and mechanical properties of the yarn, the weave of the fabric and the density of the warp and weft in the fabric. The paper analysed the parameters at the yield point during tensioning of fabrics with different densities of weft wires, different weft yarns, with applied plain weave and four-wire twill weave. A special problem for predicting the deformation characteristics of textile materials is their anisotropic properties, so the results were analysed in the direction of the warp, in the direction of the weft and the diagonal direction. A comparative analysis of the parameters at the yield point of fabrics in plain weave and four-wire twill weave, produced on the same basis in the weaving process, is given. Based on the obtained results, dependencies were proposed that can be used to predict the yielding of the corresponding fabrics in plain weave and four-wire twill weave, when the fabric is stretched in the direction of the warp, in the direction of the weft and at an angle of 45o.

Despite recent advances in the synthesis of increasingly complex topologies at the molecular level, nano- and microscopic weaves have remained difficult to achieve. Only a few diaxial molecular weaves exist—these were achieved by templation with metals. Here, we present an extended triaxial supramolecular weave that consists of self-assembled organic threads. Each thread is formed by the self-assembly of a building block comprising a rigid oligoproline segment with two perylene-monoimide chromophores spaced at 18 Å. Upon π stacking of the chromophores, threads form that feature alternating up- and down-facing voids at regular distances. These voids accommodate incoming building blocks and establish crossing points through CH– π interactions on further assembly of the threads into a triaxial woven superstructure. The resulting micrometre-scale supramolecular weave proved to be more robust than non-woven self-assemblies of the same building block. The uniform hexagonal pores of the interwoven network were able to host iridium nanoparticles, which may be of interest for practical applications. Woven topologies endow macroscopic objects with mechanical stability, but their molecular counterparts have remained difficult to prepare. Now, an extended triaxial supramolecular weave has been formed by the self-assembly of a judiciously shaped organic building block — a rigid oligoproline segment featuring two perylene-monoimide moieties — through π – π stacking and CH– π interactions.