Explore the vast range of titles available.

Bound states in the continuum (BICs) have attracted attention in photonics owing to their interesting properties. For example, BICs can effectively confine light in a counterintuitive way, and the far-field radiation of photonic structures that exhibit BICs has fascinating topological characteristics. Early research into photonic BICs was primarily focused on designing artificial structures to produce BICs. However, since the mid-2010s, exploring the potential applications of BICs has been a growing trend in research. In this Review, we detail the unique properties of BICs, including the ability to achieve enhanced light confinement, sharp Fano resonances and topological characteristics. We explore phenomena derived from BICs, including the generation of circularly polarized states and unidirectional guided resonances, and the impact of BICs on various applications such as lasing, nonlinear frequency conversion, waveguiding, sensing and wavefront control. We also discuss the insights provided by BICs in several emerging research frontiers, such as parity–time symmetric systems, higher-order topology, exciton–photon coupling and moiré superlattices.Photonic systems provide a versatile platform to explore and use bound states in the continuum. This Review discusses the potential of these states for enhancing light–matter interactions in various applications and investigating the physics of emerging photonic systems.

Metasurfaces are arrays of subwavelength spaced nanostructures that can manipulate the amplitude, phase, and polarization of light to achieve a variety of optical functions beyond the capabilities of 3D bulk optics. However, they suffer from limited performance and efficiency when multiple functions with large deflection angles are required because the non-local interactions due to optical coupling between nanostructures are not fully considered. Here we introduce a method based on supercell metasurfaces to demonstrate multiple independent optical functions at arbitrary large deflection angles with high efficiency. In one implementation the incident laser is simultaneously diffracted into Gaussian, helical and Bessel beams over a large angular range. We then demonstrate a compact wavelength-tunable external cavity laser with arbitrary beam control capabilities – including beam shaping operations and the generation of freeform holograms. Our approach paves the way to novel methods to engineer the emission of optical sources. The angular dependence is a well-known issue in metasurface engineering. Here the authors introduce a supercell metasurface able to implement multiple independent functions under large deflection angles with high efficiency, leading to a wavelength tunable laser with arbitrary wavefront control.

Vertical cavity surface-emitting lasers (VCSELs) have made indispensable contributions to the development of modern optoelectronic technologies. However, arbitrary beam shaping of VCSELs within a compact system has remained inaccessible until now. The emerging ultra-thin flat optical structures, namely metasurfaces, offer a powerful technique to manipulate electromagnetic fields with subwavelength spatial resolution. Here, we show that the monolithic integration of dielectric metasurfaces with VCSELs enables remarkable arbitrary control of the laser beam profiles, including self-collimation, Bessel and Vortex lasers, with high efficiency. Such wafer-level integration of metasurface through VCSEL-compatible technology simplifies the assembling process and preserves the high performance of the VCSELs. We envision that our approach can be implemented in various wide-field applications, such as optical fibre communications, laser printing, smartphones, optical sensing, face recognition, directional displays and ultra-compact light detection and ranging (LiDAR).Non-intrusive integration of metasurfaces with vertical cavity surface-emitting lasers enables fully arbitrary wavefront control for directional laser emission.

Metasurfaces are capable of fully reshaping the wavefronts of incident beams in desired manners. However, the requirement for external light excitation and the resonant nature of their meta-atoms, make challenging their on-chip integration. Here, we introduce the concept and design of a fresh class of metasurfaces, driven by unidirectional guided waves, capable of arbitrary wavefront control based on the unique dispersion properties of unidirectional guided waves rather than resonant meta-atoms. Upon experimentally demonstrating the feasibility of our designs in the microwave regime, we numerically validate the introduced principle through the design of several microwave meta-devices using metal-air-gyromagnetic unidirectional surface magneto-plasmons, agilely converting unidirectional guided modes into the wavefronts of 3D Bessel beams, focused waves, and controllable vortex beams. We, further, numerically demonstrate sub-diffraction focusing, which is beyond the capability of conventional metasurfaces. Our unfamiliar yet practical designs may enable full, broadband manipulation of electromagnetic waves on deep subwavelength scales. Here the authors develop a class of metasurfaces based on robust, unidirectional waves. Such metasurfaces, driven by guided one-way waves, may facilitate their on-chip integration, as well as the precise manipulation of wavefronts on deep-subwavelength scales.

The strong interaction of light with micro- and nanostructures plays a critical role in optical sensing, nonlinear optics, active optical devices, and quantum optics. However, for wavefront shaping, the required local control over light at a subwavelength scale limits this interaction, typically leading to low-quality-factor optical devices. Here, we demonstrate an avenue towards high-quality-factor wavefront shaping in two spatial dimensions based on all-dielectric higher-order Mie-resonant metasurfaces. We design and experimentally realize transmissive band stop filters, beam deflectors and high numerical aperture radial lenses with measured quality factors in the range of 202–1475 at near-infrared wavelengths. The excited optical mode and resulting wavefront control are both local, allowing versatile operation with finite apertures and oblique illumination. Our results represent an improvement in quality factor by nearly two orders of magnitude over previous localized mode designs, and provide a design approach for a new class of compact optical devices. Wavefront manipulation with metasurfaces is typically limited to low quality factors. Here, the authors show how higher-order Mie modes can be leveraged to design high quality factor optical metasurfaces for wavefront manipulation in two dimensions.

Metasurfaces have exhibited exceptional proficiency in precisely modulating light properties within narrow wavelength spectra. However, there is a growing demand for multi-resonant metasurfaces capable of wavefront engineering across broad spectral ranges. In this study, we introduce a microcavity-assisted multi-resonant metasurface platform that integrates subwavelength meta-atoms with a specially designed distributed Bragg reflector (DBR) substrate. This platform enables the simultaneous excitation of various resonant modes within the metasurface, resulting in multiple high- Q resonances spanning from the visible to the near-infrared (NIR) regions. The developed metasurface generates up to 15 high- Q resonant peaks across the visible-NIR spectrum, achieving a maximum efficiency of 81% (70.7%) in simulation (experiment) with an average efficiency of 76.6% (54.5%) and a standard deviation of 4.1% (11.1%). Additionally, we demonstrate the versatility of the multi-resonant metasurface in amplitude, phase, and wavefront modulations at peak wavelengths. By integrating structural color printing and vectorial holographic imaging, our proposed metasurface platform shows potential for applications in optical displays and encryption. This work paves the way for the development of next-generation multi-resonant metasurfaces with broad-ranging applications in photonics and beyond. Previous multi-wavelength metasurfaces are restricted to a few wavelengths or lack wavefront control ability. Here, the authors introduce a microcavity-assisted metasurface that achieves multi-resonant wavefront engineering at 15 high-Q peak wavelengths from 480 nm to 1000 nm.

Metasurfaces have been enabling the miniaturization and integration of complex optical functionalities within an ultrathin platform by engineering the scattering features of localized modes. However, these efforts have mostly been limited to the manipulation of externally produced coherent light, e.g., from a laser. In parallel, the past two decades have seen the development of structured surfaces that emit partially coherent radiation via thermally populated, spatially extended (nonlocal) modes. However, the control over thermally emitted light is severely limited compared to optical metasurfaces, and even basic functionalities such as unidirectional emission to an arbitrary angle and polarization remain elusive. Here, we derive the necessary conditions to achieve full control over thermally emitted light, pointing to the need for simultaneously tailoring local and nonlocal scattering features across the structure. Based on these findings, we introduce a platform for thermal metasurfaces based on quasibound states in the continuum that satisfies these requirements and completes the program of compactification of optical systems by enabling a full degree of control of partially coherent light emission from structured thin films, including unidirectional emission of circularly polarized light, focusing, and control of spatial and temporal coherence, as well as wave-front control with designer spin and angular orbital momenta.

We report on studies and experiments we carried out at the Advanced Photon Source (APS) at Argonne National Laboratory to develop automatic optics alignment and wavefront control systems, supported by artificial intelligence technologies and advanced real-time wavefront sensing techniques. The ultimate goal is to achieve near-perfect wavefront control and support APS beamlines and user to achieve and maintain the beam properties at the sample, while at the same freeing the operator and the user from the burden of lengthy manual alignment and beam optimization. We discuss the prototype systems we developed and successfully tested at a beamline. These systems are engineered to manage the optics of the featured beamlines of the new synchrotron.

Remitted waves are used for sensing and imaging in diverse diffusive media from the Earth’s crust to the human brain. Separating the source and detector increases the penetration depth of light, but the signal strength decreases rapidly, leading to a poor signal-to-noise ratio. Here, we show, experimentally and numerically, that wavefront shaping a laser beam incident on a diffusive sample enables an enhancement of remission by an order of magnitude at depths of up to 10 transport mean free paths. We develop a theoretical model which predicts the maximal remission enhancement. Our analysis reveals a significant improvement in the sensitivity of remitted waves to local changes of absorption deep inside diffusive media. This work illustrates the potential of coherent wavefront control for noninvasive diffuse wave imaging applications, such as diffuse optical tomography and functional near-infrared spectroscopy.

Free from phase-matching constraints, plasmonic metasurfaces have contributed significantly to the control of optical nonlinearity and enhancement of nonlinear generation efficiency by engineering subwavelength meta-atoms. However, high dissipative losses and inevitable thermal heating limit their applicability in nonlinear nanophotonics. All-dielectric metasurfaces, supporting both electric and magnetic Mie-type resonances in their nanostructures, have appeared as a promising alternative to nonlinear plasmonics. High-index dielectric nanostructures, allowing additional magnetic resonances, can induce magnetic nonlinear effects, which, along with electric nonlinearities, increase the nonlinear conversion efficiency. In addition, low dissipative losses and high damage thresholds provide an extra degree of freedom for operating at high pump intensities, resulting in a considerable enhancement of the nonlinear processes. We discuss the current state of the art in the intensely developing area of all-dielectric nonlinear nanostructures and metasurfaces, including the role of Mie modes, Fano resonances, and anapole moments for harmonic generation, wave mixing, and ultrafast optical switching. Furthermore, we review the recent progress in the nonlinear phase and wavefront control using all-dielectric metasurfaces. We discuss techniques to realize all-dielectric metasurfaces for multifunctional applications and generation of second-order nonlinear processes from complementary metal–oxide–semiconductor-compatible materials.