Explore the vast range of titles available.

Weed management is a critically important activity on both agricultural and non-agricultural lands, but it is faced with a daunting set of challenges: environmental damage caused by control practices, weed resistance to herbicides, accelerated rates of weed dispersal through global trade, and greater weed impacts due to changes in climate and land use. Broad-scale use of new approaches is needed if weed management is to be successful in the coming era. We examine three approaches likely to prove useful for addressing current and future challenges from weeds: diversifying weed management strategies with multiple complementary tactics, developing crop genotypes for enhanced weed suppression, and tailoring management strategies to better accommodate variability in weed spatial distributions. In all three cases, proof-of-concept has long been demonstrated and considerable scientific innovations have been made, but uptake by farmers and land managers has been extremely limited. Impediments to employing these and other ecologically based approaches include inadequate or inappropriate government policy instruments, a lack of market mechanisms, and a paucity of social infrastructure with which to influence learning, decision-making, and actions by farmers and land managers. We offer examples of how these impediments are being addressed in different parts of the world, but note that there is no clear formula for determining which sets of policies, market mechanisms, and educational activities will be effective in various locations. Implementing new approaches for weed management will require multidisciplinary teams comprised of scientists, engineers, economists, sociologists, educators, farmers, land managers, industry personnel, policy makers, and others willing to focus on weeds within whole farming systems and land management units.

Laser weeding may contribute to less dependency on herbicides and soil tillage. Several research and commercial projects are underway to develop robots equipped with lasers to control weeds. Artificial intelligence can be used to locate and identify weed plants, and mirrors can be used to direct a laser beam towards the target to kill it with heat. Unlike chemical and mechanical weed control, laser weeding only exposes a tiny part of the field for treatment. Laser weeding leaves behind only ashes from the burned plants and does not disturb the soil. Therefore, it is an eco-friendly method to control weed seedlings. However, perennial weeds regrow from the belowground parts after the laser destroys the aerial shoots. Depletion of the belowground parts for resources might be possible if the laser continuously kills new shoots, but it may require many laser treatments. We studied how laser could be used to destroy the widespread and aggressive perennial weed Elymus repens after the rhizomes were cut into fragments. Plants were killed with even small dosages of laser energy and stopped regrowing. Generally, the highest efficacy was achieved when the plants from small rhizomes were treated at the 3-leaf stage.

Weeds are one of the most harmful agricultural pests that have a significant impact on crops. Weeds are responsible for higher production costs due to crop waste and have a significant impact on the global agricultural economy. The importance of this problem has promoted the research community in exploring the use of technology to support farmers in the early detection of weeds. Artificial intelligence (AI) driven image analysis for weed detection and, in particular, machine learning (ML) and deep learning (DL) using images from crop fields have been widely used in the literature for detecting various types of weeds that grow alongside crops. In this paper, we present a systematic literature review (SLR) on current state-of-the-art DL techniques for weed detection. Our SLR identified a rapid growth in research related to weed detection using DL since 2015 and filtered 52 application papers and 8 survey papers for further analysis. The pooled results from these papers yielded 34 unique weed types detection, 16 image processing techniques, and 11 DL algorithms with 19 different variants of CNNs. Moreover, we include a literature survey on popular vanilla ML techniques (e.g., SVM, random forest) that have been widely used prior to the dominance of DL. Our study presents a detailed thematic analysis of ML/DL algorithms used for detecting the weed/crop and provides a unique contribution to the analysis and assessment of the performance of these ML/DL techniques. Our study also details the use of crops associated with weeds, such as sugar beet, which was one of the most commonly used crops in most papers for detecting various types of weeds. It also discusses the modality where RGB was most frequently used. Crop images were frequently captured using robots, drones, and cell phones. It also discusses algorithm accuracy, such as how SVM outperformed all machine learning algorithms in many cases, with the highest accuracy of 99 percent, and how CNN with its variants also performed well with the highest accuracy of 99 percent, with only VGGNet providing the lowest accuracy of 84 percent. Finally, the study will serve as a starting point for researchers who wish to undertake further research in this area.

Invasive alien species (IAS) can substantially affect ecosystem services and human well-being. However, quantitative assessments of their impact on human health are rare and the benefits of implementing IAS management likely to be underestimated. Here we report the effects of the allergenic plant Ambrosia artemisiifolia on public health in Europe and the potential impact of the accidentally introduced leaf beetle Ophraella communa on the number of patients and healthcare costs. We find that, prior to the establishment of O. communa , some 13.5 million persons suffered from Ambrosia -induced allergies in Europe, causing costs of Euro 7.4 billion annually. Our projections reveal that biological control of A. artemisiifolia will reduce the number of patients by approximately 2.3 million and the health costs by Euro 1.1 billion per year. Our conservative calculations indicate that the currently discussed economic costs of IAS underestimate the real costs and thus also the benefits from biological control. Invasive plants can adversely affect ecosystems and economic costs. Here, the authors quantify the impact of the invasive plant Ambrosia artemisiifolia on seasonal allergies and health costs across Europe, finding that the costs are considerably higher than what previously reported, and estimate also the reduction in the number of patients and health costs that may be obtained with biological control

The use of remote imagery captured by unmanned aerial vehicles (UAV) has tremendous potential for designing detailed site-specific weed control treatments in early post-emergence, which have not possible previously with conventional airborne or satellite images. A robust and entirely automatic object-based image analysis (OBIA) procedure was developed on a series of UAV images using a six-band multispectral camera (visible and near-infrared range) with the ultimate objective of generating a weed map in an experimental maize field in Spain. The OBIA procedure combines several contextual, hierarchical and object-based features and consists of three consecutive phases: 1) classification of crop rows by application of a dynamic and auto-adaptive classification approach, 2) discrimination of crops and weeds on the basis of their relative positions with reference to the crop rows, and 3) generation of a weed infestation map in a grid structure. The estimation of weed coverage from the image analysis yielded satisfactory results. The relationship of estimated versus observed weed densities had a coefficient of determination of r(2)=0.89 and a root mean square error of 0.02. A map of three categories of weed coverage was produced with 86% of overall accuracy. In the experimental field, the area free of weeds was 23%, and the area with low weed coverage (<5% weeds) was 47%, which indicated a high potential for reducing herbicide application or other weed operations. The OBIA procedure computes multiple data and statistics derived from the classification outputs, which permits calculation of herbicide requirements and estimation of the overall cost of weed management operations in advance.

Weeds are attractive models for basic and applied research due to their impacts on agricultural systems and capacity to swiftly adapt in response to anthropogenic selection pressures. Currently, a lack of genomic information precludes research to elucidate the genetic basis of rapid adaptation for important traits like herbicide resistance and stress tolerance and the effect of evolutionary mechanisms on wild populations. The International Weed Genomics Consortium is a collaborative group of scientists focused on developing genomic resources to impact research into sustainable, effective weed control methods and to provide insights about stress tolerance and adaptation to assist crop breeding.

Weed control is among the most challenging issues for crop cultivation and turf grass management. In addition to hosting various insects and plant pathogens, weeds compete with crop for nutrients, water and sunlight. This results in problems such as the loss of crop yield, the contamination of food crops and disruption in the field aesthetics and practicality. Therefore, effective and efficient weed detection and mapping methods are indispensable. Deep learning (DL) techniques for the rapid recognition and localization of objects from images or videos have shown promising results in various areas of interest, including the agricultural sector. Attention-based Transformer models are a promising alternative to traditional constitutional neural networks (CNNs) and offer state-of-the-art results for multiple tasks in the natural language processing (NLP) domain. To this end, we exploited these models to address the aforementioned weed detection problem with potential applications in automated robots. Our weed dataset comprised of 1006 images for 10 weed classes, which allowed us to develop deep learning-based semantic segmentation models for the localization of these weed classes. The dataset was further augmented to cater for the need of a large sample set of the Transformer models. A study was conducted to evaluate the results of three types of Transformer architectures, which included Swin Transformer, SegFormer and Segmenter, on the dataset, with SegFormer achieving final Mean Accuracy (mAcc) and Mean Intersection of Union (mIoU) of 75.18% and 65.74%, while also being the least computationally expensive, with just 3.7 M parameters.

Crop and weed discrimination in natural field environments is still challenging for implementing automatic agricultural practices, such as weed control. Some weed control methods have been proposed. However, these methods are still restricted as they are implemented under controlled conditions. The development of a sound weed control system begins by recognizing the crop and the different weed plants presented in the field. In this work, a classification approach of Zea mays L. (Crop), narrow-leaf weeds (NLW), and broadleaf weeds (BLW) from multi-plant images are presented. Moreover, a large image dataset was generated. Images were captured in natural field conditions, in different locations, and growing stages of the plants. The extraction of regions of interest (ROI) is carried out employing connected component analysis (CCA), whereas the classification of ROIs is based on Convolutional Neural Networks (CNN) and compared with a shallow learning approach. To measure the classification performance of both methods, accuracy, precision, recall, and F1-score metrics were used. The best alternative for the weed classification task at early stages of growth and in natural corn field environments was the CNN-based approach, as indicated by the 97% accuracy value obtained.

Weed detection and classification using computer vision and deep learning techniques have emerged as crucial tools for precision agriculture, offering automated solutions for sustainable farming practices. This study presents a comprehensive approach to weed identification across multiple growth stages, addressing the challenges of detecting and classifying diverse weed species throughout their developmental cycles. We introduce two extensive datasets: the Alpha Weed Dataset (AWD) with 203,567 images and the Beta Weed Dataset (BWD) with 120,341 images, collectively documenting 16 prevalent weed species across 11 growth stages. The datasets were preprocessed using both traditional computer vision techniques and the advanced SAM-2 model, ensuring high-quality annotations with segmentation masks and precise bounding boxes. Our research evaluates several state-of-the-art object detection architectures, including DINO Transformer (with ResNet-101 and Swin backbones), Detection Transformer (DETR), EfficientNet B4, YOLO v8, and RetinaNet. Additionally, we propose a novel WeedSwin Transformer architecture specifically designed to address the unique challenges of weed detection, such as complex morphological variations and overlapping vegetation patterns. Through rigorous experimentation, WeedSwin demonstrated superior performance, achieving 0.993 ± 0.004 mAP and 0.985 mAR while maintaining practical processing speeds of 218.27 FPS, outperforming existing architectures across various metrics. The comprehensive evaluation across different growth stages reveals the robustness of our approach, particularly in detecting challenging “driver weeds” that significantly impact agricultural productivity. By providing accurate, automated weed identification capabilities, this research establishes a foundation for more efficient and environmentally sustainable weed management practices. The demonstrated success of the WeedSwin architecture, combined with our extensive temporal datasets, represents a significant advancement in agricultural computer vision, supporting the evolution of precision farming techniques while promoting reduced herbicide usage and improved crop management efficiency.

A new aerial platform has risen recently for image acquisition, the Unmanned Aerial Vehicle (UAV). This article describes the technical specifications and configuration of a UAV used to capture remote images for early season site- specific weed management (ESSWM). Image spatial and spectral properties required for weed seedling discrimination were also evaluated. Two different sensors, a still visible camera and a six-band multispectral camera, and three flight altitudes (30, 60 and 100 m) were tested over a naturally infested sunflower field. The main phases of the UAV workflow were the following: 1) mission planning, 2) UAV flight and image acquisition, and 3) image pre-processing. Three different aspects were needed to plan the route: flight area, camera specifications and UAV tasks. The pre-processing phase included the correct alignment of the six bands of the multispectral imagery and the orthorectification and mosaicking of the individual images captured in each flight. The image pixel size, area covered by each image and flight timing were very sensitive to flight altitude. At a lower altitude, the UAV captured images of finer spatial resolution, although the number of images needed to cover the whole field may be a limiting factor due to the energy required for a greater flight length and computational requirements for the further mosaicking process. Spectral differences between weeds, crop and bare soil were significant in the vegetation indices studied (Excess Green Index, Normalised Green-Red Difference Index and Normalised Difference Vegetation Index), mainly at a 30 m altitude. However, greater spectral separability was obtained between vegetation and bare soil with the index NDVI. These results suggest that an agreement among spectral and spatial resolutions is needed to optimise the flight mission according to every agronomical objective as affected by the size of the smaller object to be discriminated (weed plants or weed patches).