Explore the vast range of titles available.

Spontaneous S-alkylation of methimazole (1) with 1,2-dichloroethane (DCE) into 1,2-bis[(1-methyl-1H-imidazole-2-yl)thio]ethane (2), that we have described recently, opened the question about its formation pathway(s). Results of the synthetic, NMR spectroscopic, crystallographic and computational studies suggest that, under given conditions, 2 is obtained by direct attack of 1 on the chloroethyl derivative 2-[(chloroethyl)thio]-1-methyl-1H-imidazole (3), rather than through the isolated stable thiiranium ion isomer, i.e., 7-methyl-2H, 3H, 7H-imidazo[2,1-b]thiazol-4-ium chloride (4a, orthorhombic, space group Pnma), or in analogy with similar reactions, through postulated, but unproven intermediate thiiranium ion 5. Furthermore, in the reaction with 1, 4a prefers isomerization to the N-chloroethyl derivative, 1-chloroethyl-2,3-dihydro-3-methyl-1H-imidazole-2-thione (7), rather than alkylation to 2, while 7 further reacts with 1 to form 3-methyl-1-[(1-methyl-imidazole-2-yl)thioethyl]-1H-imidazole-2-thione (8, monoclinic, space group P 21/c). Additionally, during the isomerization of 3, the postulated intermediate thiiranium ion 5 was not detected by chromatographic and spectroscopic methods, nor by trapping with AgBF4. However, trapping resulted in the formation of the silver complex of compound 3, i.e., bis-2-[(chloroethyl)thio]-1-methyl-1H-imidazole-silver(I)tetrafluoroborate (6, monoclinic, space group P 21/c), which cyclized upon heating at 80 °C to 7-methyl-2H, 3H, 7H-imidazo[2,1-b]thiazol-4-ium tetrafluoroborate (4b, monoclinic, space group P 21/c). Finally, we observed thermal isomerization of both 2 and 2,3-dihydro-3-methyl-1-[(1-methyl-1H-imidazole-2-yl)thioethyl]-1H-imidazole-2-thione (8), into 1,2-bis(2,3-dihydro-3-methyl-1H-imidazole-2-thione-1-yl)ethane (9), which confirmed their structures.

Background Acute appendicitis (AA) is the most common surgical disease, and appendectomy is the treatment of choice in the majority of cases. A correct diagnosis is key for decreasing the negative appendectomy rate. The management can become difficult in case of complicated appendicitis. The aim of this study is to describe the worldwide clinical and diagnostic work-up and management of AA in surgical departments. Methods This prospective multicenter observational study was performed in 116 worldwide surgical departments from 44 countries over a 6-month period (April 1, 2016–September 30, 2016). All consecutive patients admitted to surgical departments with a clinical diagnosis of AA were included in the study. Results A total of 4282 patients were enrolled in the POSAW study, 1928 (45%) women and 2354 (55%) men, with a median age of 29 years. Nine hundred and seven (21.2%) patients underwent an abdominal CT scan, 1856 (43.3%) patients an US, and 285 (6.7%) patients both CT scan and US. A total of 4097 (95.7%) patients underwent surgery; 1809 (42.2%) underwent open appendectomy and 2215 (51.7%) had laparoscopic appendectomy. One hundred eighty-five (4.3%) patients were managed conservatively. Major complications occurred in 199 patients (4.6%). The overall mortality rate was 0.28%. Conclusions The results of the present study confirm the clinical value of imaging techniques and prognostic scores. Appendectomy remains the most effective treatment of acute appendicitis. Mortality rate is low.

Twelve drugs containing sildenafil compounds (sildenafil citrate and sildenafil base) were examined using X-ray studies and thermal analysis. According to the manufacturer’s information, the presence of sildenafil was confirmed in all investigated drugs. The positions of diffraction lines (value of 2θ angle) agree with the patterns presented in the ICDD database, Release 2018 (ICDD—International Centre of Diffraction Data). The difference expresses the agreement in the position of the diffraction line between the tested substance and the standard. A good agreement is when this difference is less than 0.2°. The values of interplanar distances dhkl are also compatible with the ICDD database. It indicated that the drug examined was genuine. Because all drugs are mixtures of different substances (API and excipients), the various diffraction line intensities were detected in all observed X-ray images for the tested drugs. The intensity of the diffraction line depends on many factors, like the amount of substance, coexisting phases, and mass absorption coefficient of the mixture. The thermal analysis confirmed the results obtained by the X-ray study. On DSC curves, the endothermic peaks for sildenafil compounds were observed. The determined melting points of sildenafil compounds corresponded to the values available in the literature. The results gathered by connecting two methods, X-ray study and thermal analysis, can help identify irregularities that may exist in pharmaceutical specimens, e.g., distinguishing genuine from counterfeit products, the presence of a correct polymorph, a lack of active substance, an inaccurate amount of the active substance, or excipients in the tested drug.

Two new monobasic tridentate O⁀N⁀N donor ligands, HL1 (I) and HL2 (II) have been obtained in two steps by reacting phenylhydrazine and salicylaldehyde or 3,5-di-tert-butylsalicylaldehyde and then reacting the resulting compounds with 2-chloromethylbenzimidazole in the presence of triethylamine. The reaction of [VIVO(acac)2] with these ligands in a 1:1 molar ratio in dry methanol led to the formation of homogeneous oxidovanadium(IV) complexes [VIVO(acac)L1] (1) and [VIVO(acac)L2] (2). Immobilization of these complexes on chloromethylated polystyrene (PS-Cl) cross-linked with divinyl benzene resulted in corresponding polymer-supported heterogeneous complexes PS-[VIVO(acac)L1] (3) and PS-[VIVO(acac)L2] (4). Ligands (I and II), homogeneous complexes (1 and 2) and heterogeneous complexes (3 and 4) have been characterized using elemental analysis and various spectroscopic techniques. A single crystal X-ray diffraction study of I and 1 further confirms their structures. The oxidation state IV of vanadium in these complexes was assured by recording their EPR spectra while heterogeneous complexes were further characterized using field emission-scanning electron microscopy (FE-SEM) combined with energy dispersive X-ray analysis (EDS) and atomic force microscopy (AFM). All vanadium complexes have been explored for their catalytic potential to one-pot-three-component reactions (reagents: benzil, ammonium acetate and various aromatic aldehydes) for the efficient synthesis of 2,4,5-triphenyl-1H-imidazole derivatives (nine examples). Various reaction conditions have been optimized to obtain a maximum yield (up to 96%) of catalytic products. It has been found that heterogeneous complexes show excellent catalytic activity and are recyclable up to five catalytic cycles.

C-5-bromo-2-hydroxyphenylcalix[4]-2-methylresorcinarene (I) was synthesized by cyclocondensation of 5-bromo-2-hydroxybenzaldehyde and 2-methylresorcinol in the presence of concentrated HCl. Compound I was characterized by infrared and nuclear magnetic resonance spectroscopic data. X-ray analysis showed that this compound crystallized in a triclinic system with space group of Pī, a = 15.9592(16)Å, b = 16.9417(17)Å, c = 17.0974(17)Å, α = 68.656(3)°, β = 85.689(3)°, γ = 81.631(3)°, Z = 2 and V = 4258.6(7)Å3. The molecule adopts a chair (C2h) conformation. The thermal properties and antioxidant activity were also investigated. It was strongly antiviral against HSV-1 and weakly antibacterial against Gram-positive bacteria. Cytotoxicity testing on Vero cells showed that it is non-toxic, with a CC50 of more than 0.4 mg/mL.

A series of N-pyridyl ureas bearing 1,2,4- (1a, 2a, and 3a) and 1,3,4-oxadiazole moiety (1b, 2b, 3b) was prepared and characterized by HRMS, 1H and 13C NMR spectroscopy, as well as X-ray diffraction. The inspection of the crystal structures of (1–3)a,b and the Hirshfeld surface analysis made possible the recognition of the (oxadiazole)···(pyridine) and (oxadiazole)···(oxadiazole) interactions. The presence of these interactions was confirmed theoretically by DFT calculations, including NCI analysis for experimentally determined crystal structures as well as QTAIM analysis for optimized equilibrium structures. The preformed database survey allowed the verification of additional examples of relevant (oxadiazole)···π interactions both in Cambridge Structural Database and in Protein Data Bank, including the cocrystal of commercial anti-HIV drug Raltegravir.

Reactions of picolinamides with 1,3-propanesultone in methanol followed by the treatment with ketones led to a series of previously unknown chemical transformations, yielding first pyridinium salts (2a–f), with a protonated endocyclic nitrogen atom, and then heterocyclic salts (3a–j) containing an imidazolidin-4-one ring. The structures of intermediate and final products were determined by IR and 1H, 13C NMR spectroscopy, and X-ray study. The effects of the ketone and alcohol structures on the product yield were studied by quantum-chemical calculations. The stability of salts 3a–j towards hydrolysis and alcoholysis makes them excellent candidates for the search for new types of biologically active compounds.

The ‘wire-like’ acetylenic moiety is an important building block in organic and coordination chemistry that can facilitate electron transfer in donor–acceptor compounds, contributing to the enhancement of their photophysical properties. 2,6-Bis-(thiazol-2-yl)pyridine (dtpy) functionalized with a 4-phenylacetylene group (Ph-C≡C-dtpy) was, for the first time, used for the preparation of [ReCl(CO)3(Ph-C≡C-dtpy)] and [Pt(Ph-C≡C-dtpy)Cl]CF3SO3 in order to understand the properties derived from the use of the acetylenic substituent. The coordination ability of Ph-C≡C-dtpy toward Pt(II) and Re(I) centers was determined. All the studied compounds were characterized using FT-IR, 1H NMR, and 13C NMR spectroscopies, elemental analysis and, in the case of the free ligand and rhenium(I) complex, single-crystal X-ray analysis was also used. Their electrochemical, photophysical, and thermal properties were compared with the previously described similar systems. The photoluminescence spectra of Ph-C≡C-dtpy, [ReCl(CO)3(Ph-C≡C-dtpy)] and [Pt(Ph-C≡C-dtpy)Cl]CF3SO3 were investigated in solution and in the solid state at 298 K and 77 K. The experimental results were supported by the DFT and TD-DFT calculations. As a result of the introduction of the -C≡C- moiety into the organic ligand skeleton, the Re(I) and Pt(II) complexes display room-temperature emission. In the case of [Pt(Ph-C≡C-dtpy)Cl]CF3SO3, photoluminescence lifetime in a microsecond regime was observed, whereas nanosecond lifetime for [ReCl(CO)3(Ph-C≡C-dtpy)] in solution is comparable to lifetimes previously observed for rhenium(I) compounds with 4-substituted dtpys.

One pot reaction of K 2 MCl 4 with two equivalents of 2,5-dimercapto-1,3,4-thiadiazole (dmtzsH 2 ) and one equivalent of 1,2-bis(diphenylphosphino)ethane (dppe) in MeOH/CH 2 Cl 2 mixed solvents resulted in the formation of [M(dmtzsH) 2 (dppe)], M = Pd 1 or Pt 2 in 49 and 77% yield respectively. The same products were obtained in 54 and 80% yield on using two equivalents of KOH in EtOH/CH 2 Cl 2 mixed solvents. The prepared complexes were characterized by elemental analysis, magnetic susceptibility, molar conductance, UV–Visible, FT-IR, 1 H, 31 P-{ 1 H} nmr spectroscopy and 1 by X-ray crystallography. The crystal structure of 1 reveal that the two dmtzsH ligands function as monodentate binding to palladium through the exocyclic sulfur atom in a thiolate form, whereas dppe binds in a bidentate chelate fashion. The two complexes 1 and 2 were evaluated for their anti-cancer activity using in vitro methods against the MCF-7 cell line, a type of Breast cancer cell. The results indicated that both complexes exhibit a promising anticancer effect, IC 50 values of 55 µg/ml at a concentration of 500 µg/ml. The stability and molecular reactivity of the ligands and complexes have been demonstrated through the utilization of density functional theory (DFT) and Hirshfeld analysis.

Absolute calibration of small-angle scattering (SAS) intensity data (measured in terms of the differential scattering cross section per unit sample volume per unit solid angle) is essential for many important aspects of quantitative SAS analysis, such as obtaining the number density, volume fraction, and specific surface area of the scatterers. It also enables scattering data from different instruments (light, X-ray, or neutron scattering) to be combined, and it can even be useful to detect the existence of artifacts in the experimental data. Different primary or secondary calibration methods are available. In the latter case, absolute intensity calibration requires a stable artifact with the necessary scattering profile. Glassy carbon has sometimes been selected as this intensity calibration standard. Here we review the spatial homogeneity and temporal stability of one type of commercially available glassy carbon that is being used as an intensity calibration standard at a number of SAS facilities. We demonstrate that glassy carbon is sufficiently homogeneous and stable during routine use to be relied upon as a suitable standard for absolute intensity calibration of SAS data.