Explore the vast range of titles available.

Alginate-based edible films containing natural antioxidants from pineapple peel were applied in the microbial spoilage control, color preservation, and barrier to lipid oxidation of beef steaks under storage at 4 °C for five days. Different stabilization methods of pineapple peel compounds were used before incorporation into alginate films, including extracted compounds with an hydroalcoholic solvent encapsulated in microparticles, microparticles produced by spray-drying pineapple peel juice, and particles obtained by milling freeze dried pineapple peel. Bioactive films exhibited higher antioxidant activity (between 0.15 µmol to 0.35 µmol FeSO4.7H2O/g dried film) than the alginate film without these compounds (0.02 µmol FeSO4.7H2O/g dried film). Results showed that control films without active compounds had no significant effect on decreasing the microbial load of aerobic mesophilic and Pseudomonas spp., while the films containing encapsulated hydroalcoholic extract showed a significant inhibitory effect on microbial growth of meat at two days of storage. Alginate films containing peel encapsulated extract were effective for maintaining the color hue and intensity of red beef meat samples. Pineapple peel antioxidants have the potential to retard lipid oxidation in meat samples, and the possibility of incorporation of a higher amount of pineapple peel bioactive compounds in the films should be investigated.

Objective: This study was done to investigate the film properties and antioxidant activities of sodium alginate films (SAFs) added with different levels (0.5, 1, and 2%) of oven-dried (100°C) lotus rhizome root powder (ODLRRP).Methods: After pork patties were wrapped with different SAFs, the physiochemical properties and antimicrobial and antioxidant activities of pork patties were determined.Results: SAFs containing ODLRRP decreased the pH, lightness (L*), and equilibrium water content but increased the redness (a*), yellowness (b*), transparency, moisture content, and antioxidant activities. SAFs containing ODLRRP increased the color values, but L*, 2-thiobarbituric acid-reactive substances, microbial counts, and water content decreased. In pork patties wrapped with SAFs containing ODLRRP at levels greater than 1% ODLRRP, the L*, volatile basic nitrogen, and total bacterial counts decreased, whereas b* increased.Conclusion: These results indicated that pork patties wrapped with SAFs containing more than 1% ODLRRP could inhibit microbial growth and reduce protein denaturation.

Alginate is a naturally occurring polysaccharide used in the bio industry. It is mainly derived from brown algae species. Alginate-based edible coatings and films attract interest for improving/maintaining quality and extending the shelf-life of fruit, vegetable, meat, poultry, seafood, and cheese by reducing dehydration (as sacrificial moisture agent), controlling respiration, enhancing product appearance, improving mechanical properties, etc. This paper reviews the most recent essential information about alginate-based edible coatings. The categorization of alginate-based coatings/film in food packaging concept is formed gradually with the explanation of the most important titles. Emphasis will be placed on active ingredients incorporated into alginate-based formulations, edible coating/film application methods, research and development studies of coated food products and mass transfer and barrier characteristics of the alginate-based coatings/films. Future trends are also reviewed to identify research gaps and recommend new research areas. The summarized information presented in this article will enable researchers to thoroughly understand the fundamentals of the coating process and to develop alginate-based edible films and coatings more readily.

In this work, smart edible coating and films with excellent UV barrier properties were prepared from alginate, whey protein isolate, and curcumin. The primary focus of this investigation centered on assessing the impact of whey protein and curcumin on the physical and functional properties of the alginate films. Whey protein reduced the film transparency while simultaneously enhancing the hydrophobicity and antioxidant properties of the alginate film. Curcumin imparted a yellow hue to the film, consequently decreasing the transparency of the film. It also substantially improved hydrophobicity, antioxidant activity, and UV-blocking efficiency within the films. Remarkably, curcumin demonstrated a significant reduction in the water vapor transmission rate of the film. For the preservation of apples, a higher concentration of curcumin was required, which effectively suppressed the respiration rate and moisture loss post-harvest, resulting in an extended shelf-life for the apples. As a result, the coated apples exhibited significantly reduced enzymatic browning and weight loss in comparison to their uncoated counterparts. Furthermore, these curcumin-containing films underwent a reversible color change from orange to red when exposed to ammonia vapor. This attribute highlights the potential of the developed coating and film as a smart, active food packaging solution, particularly for light-sensitive food products.

The environmental problems of synthetic plastics in food packaging have led researchers to synthesize biodegradable films. In this study, nanocomposite alginate‐based films containing TiO2 nanoparticles (1%) and cumin essential oil (CEO, 2%) were fabricated and the potential of these films to protect beef from chemical [pH, total volatile base nitrogen (TVBN), peroxide value, and thiobarbituric acid reactive substances (TBA)] and microbial [total viable count, Enterobacteriaceae, lactic acid bacteria, Listeria monocytogenes, and Pseudomonas spp.] spoilage was evaluated during 24 days of storage (4°C). The active films significantly induced the reduction in lipid oxidation, microbial growth, and TVBN values, improved the sensory attributes of treated samples, maintained the redness of meats for a longer time, and increased the shelf life of beef from 4 to 16 days. The results of this study showed that TiO2/CEO alginate‐based nanocomposite film has a great potential for application in meat and meat products. Cumin essential oil and TiO2 nanoparticles were incorporated into the alginate‐based film. The active packaging reduced the beef microbial growth and fat oxidation remarkably. The functional ingredients could quadruple the shelf life of fresh beef.

The aim of the study was to characterize and compare films made of cellulose nanocrystals (CNC), nano-fibrils (CNF), and bacterial nanocellulose (BNC) in combination with chitosan and alginate in terms of applicability for potential food packaging applications. In total, 25 different formulations were made and evaluated, and seven biopolymer films with the best mechanical performance (tensile strength, strain)—alginate, alginate with 5% CNC, chitosan, chitosan with 3% CNC, BNC with and without glycerol, and CNF with glycerol—were selected and investigated regarding morphology (SEM), density, contact angle, surface energy, water absorption, and oxygen and water barrier properties. Studies revealed that polysaccharide-based films with added CNC are the most suitable for packaging purposes, and better dispersing of nanocellulose in chitosan than in alginate was observed. Results showed an increase in hydrophobicity (increase of contact angle and reduced moisture absorption) of chitosan and alginate films with the addition of CNC, and chitosan with 3% CNC had the highest contact angle, 108 ± 2, and 15% lower moisture absorption compared to pure chitosan. Overall, the ability of nanocellulose additives to preserve the structure and function of chitosan and alginate materials in a humid environment was convincingly demonstrated. Barrier properties were improved by combining the biopolymers, and water vapor transmission rate (WVTR) was reduced by 15–45% and oxygen permeability (OTR) up to 45% by adding nanocellulose compared to single biopolymer formulations. It was concluded that with a good oxygen barrier, a water barrier that is comparable to PLA, and good mechanical properties, biopolymer films would be a good alternative to conventional plastic packaging used for ready-to-eat foods with short storage time.

Association of long hydrocarbon chain with alginate molecule imparts surface active properties and increases chain flexibility. This work studied the efficacy of synthesized hexyl alginate derivative as a film-forming material with unique amphiphilic and mechanical properties for the preparation of rapidly disintegrating repaglinide oral films with higher drug release rate and improved bioavailability. Alginate hexyl amide derivative was prepared and used in the formulation of oral films by solvent casting technique. Using Box-Behnken experimental design, formulations were optimized at different polymer, plasticizer, and disintegrant levels as independent variables for maximum drug release rate, higher tensile strength, and shortest disintegration time as responses. Optimized film formulae were fully evaluated and subjected to further in vivo bioavailability studies in rabbits. Higher dependency of response results on the selected variables was observed. Optimized formula showed satisfactory tensile strength (145.862 g/cm ), rapid disintegration (22.2 seconds), and higher drug release rate (97.799% within 30 minutes). The drug bioavailability was significantly improved in comparison with plain drug and conventional alginate oral films, where the AUC and C values reached 296.072 μg.h/mL and 116.932 μg/mL in comparison with 164.917 μg.h/mL and 56.568 μg/mL for alginate film and 95.368 μg.h/mL and 31.925 μg/mL for plain drug, respectively. T also showed significant reduction to be only 30 minutes in comparison with 60 minutes for other forms. This led to the final conclusion that the synthesized alginate derivative is an innovative promising film-forming material with unique mechanical and drug release properties for application in buccal drug delivery especially of Biopharmaceutics Classification System (BCS) class II drugs to increase solubility and improve bioavailability.

In this study, Ecklonia cava alginate (ECA) was used as a base material for biodegradable films. Calcium chloride (CaCl2) was used as a cross-linking agent, and various concentrations (0%, 0.4%, 0.7%, and 1.0%) of cinnamon leaf oil (CLO) or cinnamon bark oil (CBO) were incorporated to prepare active films. The ECA film containing 3% CaCl2 had a tensile strength (TS) of 17.82 MPa and an elongation at break (E) of 10.36%, which were higher than those of the film without CaCl2. As the content of essential oils (EOs) increased, TS decreased and E increased. Addition of CLO or CBO also provided antioxidant and antimicrobial activities to the ECA films. The antioxidant activity of the ECA film with CBO was higher than that of the film containing CLO. In particular, the scavenging activities of the 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) radicals in the ECA film containing 1% CBO were 50.45% and 99.37%, respectively. In contrast, the antimicrobial activities against Escherichia coli O157:H7, Salmonella Typhimurium, Staphylococcus aureus, and Listeria monocytogenes were superior in the ECA films with CLO. These results suggest that ECA films containing CLO or CBO can be applied as new active packaging materials.

Currently, the exploration of natural colorants from vegetal waste has gained particular attention. Furthermore, incorporation of these natural sources into biopolymers is an encouraging environmentally friendly approach to establishing active films with biological activities for food packaging. The present study developed bioactive antioxidant films based on gelatin-sodium alginate (NaAlg) incorporated with aqueous beetroot peel extract (BPE). Firstly, the effects of combining gelatin-NaAlg and BPE at 0.25, 0.5, and 1% on the mechanical, physical, antioxidant, and antibacterial properties of the films were analyzed. With increasing BPE, mechanico-physical properties and antioxidant and anti-foodborne pathogen capacities were enhanced. Likewise, when added to gelatin-NaAlg films, BPE remarkably increased the instrumental color properties. Moreover, during 14 days of storage at 4 °C, the impact of gelatin-NaAlg coating impregnated with BPE on microbial and chemical oxidation and on the sensory characteristics of beef meat samples was periodically assessed. Interestingly, by the end of the storage, BPE at 1% limited the microbial deterioration, enhanced the instrumental color, delayed chemical oxidation, and improved sensory traits. By practicing chemometrics tools (principal component analysis and heat maps), all data provided valuable information for categorizing all samples regarding microbiological and oxidative properties, sensory features, and instrumental color. Our findings revealed the ability of gelatin-NaAlg with BPE as an antioxidant to be employed as food packaging for meat preservation.

The long-term conservation of Prunus persica (peach), a crop of significant agronomic and genetic value, remains challenging due to its recalcitrance to conventional cryopreservation methods. Low tolerance to dehydration and cryoprotectant toxicity often results in poor survival and regrowth, thereby limiting the reliability of germplasm storage. This study evaluated whether combining an alginate hydrogel matrix with Pluronic F-68 improves vitrification efficiency and post-thaw regeneration of peach shoot tips by enhancing dehydration dynamics and reducing cryo-injury. Shoot tips were immobilized in thin sodium alginate layers on aluminum foil strips, with the hydrogel providing mechanical stabilization and moderating water loss during exposure to PVS3 and subsequent liquid nitrogen immersion. To further mitigate cryoinjury, Pluronic F-68, a non-ionic surfactant with membrane-stabilizing properties, was incorporated into the system. Differential scanning calorimetry revealed that the hydrogel reached complete vitrification after 120 min in PVS3, whereas encapsulated shoot tips required 150 min for full suppression of crystallization. The optimized system achieved 71% post-cryopreservation survival and 40% regrowth, compared with 25% and 9% in non-encapsulated controls. PF-68 accelerated vitrification kinetics, lowered crystallization enthalpies, and improved post-thaw viability. These findings demonstrate that engineered hydrogel–surfactant matrices can stabilize the microenvironment during vitrification and offer a promising approach for the long-term cryopreservation of peach germplasm.