Explore the vast range of titles available.

Circulating exosomal microRNAs (miRNAs) are valuable biomarker candidates; however, information on the characterization and mutual agreement of commercial kits for circulating exosomal miRNA profiling is scarce. Here, we analyzed the advantages and weaknesses of four commonly used commercial kits for exosomal miRNA profiling and their application to the sample of serum and/or plasma, respectively. NanoSight and Western blotting were conducted to evaluate the efficiency and purity of the isolated exosomes. In our conditions, the size distribution of the isolated particles was appropriate (40–150 nm), and ExoQuick™ Exosome Precipitation Solution (EXQ) generated a relatively high yield of exosomes. Nevertheless, albumin impurity was ubiquitous for all the four kits, and Total Exosome Isolation for serum or plasma (TEI) yielded a relatively pure isolation. We further performed Illumina sequencing combined with RT-qPCR to determine the ability of these kits for miRNA profiling. There was significant correlation of the exosomal miRNA profile and specific miRNAs between kits, but with differences depending on methods. exoRNeasy Serum/Plasma Midi Kit (EXR) and EXQ performed better in the specific exosomal miRNAs recovery. Intraassay CVs for specific miRNA measurement were 0.88–3.82, 1.19–3.77, 0–2.70, and 1.23–9.11% for EXR, TEI, EXQ, and RIBO™ Exosome Isolation Reagent (REI), respectively. In each kit, serum yielded a higher abundance of exosomes and exosomal miRNAs than plasma, yet with more albumin impurity. In conclusion, our data provide some valuable guidance for the methodology of disease biomarker identification of circulation exosomal miRNAs.

The recent outbreak of the Coronavirus disease 2019 (COVID-19) has quickly spread worldwide since its discovery in Wuhan city, China in December 2019. A comprehensive strategy, including surveillance, diagnostics, research, clinical treatment, and development of vaccines, is urgently needed to win the battle against COVID-19. The past three unprecedented outbreaks of emerging human coronavirus infections at the beginning of the 21st century have highlighted the importance of readily available, accurate, and rapid diagnostic technologies to contain emerging and re-emerging pandemics. Real-time reverse transcriptase-polymerase chain reaction (rRT-PCR) based assays performed on respiratory specimens remain the gold standard for COVID-19 diagnostics. However, point-of-care technologies and serologic immunoassays are rapidly emerging with high sensitivity and specificity as well. Even though excellent techniques are available for the diagnosis of symptomatic patients with COVID-19 in well-equipped laboratories; critical gaps still remain in screening asymptomatic people who are in the incubation phase of the virus, as well as in the accurate determination of live viral shedding during convalescence to inform decisions for ending isolation. This review article aims to discuss the currently available laboratory methods and surveillance technologies available for the detection of COVID-19, their performance characteristics and highlight the gaps in current diagnostic capacity, and finally, propose potential solutions. We also summarize the specifications of the majority of the available commercial kits (PCR, EIA, and POC) for laboratory diagnosis of COVID-19.

Background Bacterial blight of rice, caused by Xanthomonas oryzae pv. oryzae ( Xoo ), is a devastating rice disease in Southeast Asia and West Africa. OsSWEET14 , encoding a sugar transporter, is known to be a major susceptible gene of bacterial blight targeted by four different transcription activator-like (TAL) effectors from either Asian or African Xoo strains. However, the OsSWEET14 single knockout or promoter mutants in the Kitaake background are moderately resistant or even susceptible to African Xoo strains. Therefore, in this study, we knocked out OsSWEET14 in rice cv. Zhonghua 11 background for disease assessment. Results In this study, CRISPR/Cas9 was utilized to disrupt the function of OsSWEET14 by modifying its corresponding coding region in the genome of rice cv. Zhonghua 11 ( CR-S14 ). In total, we obtained nine different OsSWEET14 -mutant alleles. Besides conferring broad-spectrum resistance to Asian Xoo strains, tested mutant alleles also showed strong resistance to African Xoo strain AXO1947. Moreover, the expression of OsSWEET14 was detected in vascular tissues, including the stem, leaf sheath, leaf blade and root. The disruption of OsSWEET14 led to increased plant height without a reduction in yield. Conclusions Disruption of OsSWEET14 in the Zhonghua 11 background is able to confer strong resistance to African Xoo strain AXO1947 and Asian Xoo strain PXO86. CR-S14 has normal reproductive growth and enhanced plant height under normal growth conditions. These results imply that CR-S14 may serve as a better tester line than sweet14 single-knockout mutant in the Kitaake background for the diagnostic kit for rice blight resistance. The genetic background and increased plant height need to be taken into consideration when utilizing OsSWEET14 for resistant rice breeding.

Background The world’s top three cereals, based on their monetary value, are rice, wheat, and corn. In cereal crops, DNA extraction is difficult owing to rigid non-cellulose components in the cell wall of leaves and high starch and protein content in grains. The advanced techniques in molecular biology require pure and quick extraction of DNA. The majority of existing DNA extraction methods rely on long incubation and multiple precipitations or commercially available kits to produce contaminant-free high molecular weight DNA. Results In this study, we compared three different methods used for the isolation of high-quality genomic DNA from the grains of cereal crop, Zea mays , with minor modifications. The DNA from the grains of two maize hybrids, M10 and M321, was extracted using extraction methods DNeasy Qiagen Plant Mini Kit, CTAB-method (with/without 1% PVP) and modified Mericon extraction. Genes coding for 45S ribosomal RNA are organized in tandem arrays of up to several thousand copies and contain codes for 18S, 5.8S and 26S rRNA units separated by internal transcribed spacers ITS1 and ITS2. While the rRNA units are evolutionary conserved, ITS regions show high level of interspecific divergence and have been used frequently in genetic diversity and phylogenetic studies. In this study, the genomic DNA was then amplified with PCR using primers specific for ITS gene. PCR products were then visualized on agarose gel. Conclusion The modified Mericon extraction method was found to be the most efficient DNA extraction method, capable to provide high DNA yields with better quality, affordable cost and less time.

The objective of this study is to explore the probiotic properties and optimal growth conditions of Lactiplantibacillus plantarum BG24. L. plantarum BG24 exhibited a remarkable ability to utilize lactose, and to grow under acidic conditions and in the presence of high levels of bile salts. The strain showed the highest antibacterial activity against L. monocytogenes Scott A (zone of inhibition: 26 mm). L. plantarum BG24 was found to be resistant to 8 of the tested 19 antibiotics using the disc diffusion method.and its multiple antibiotic resistance (MAR) index was calculated as 0.421. The adhesion rate to human intestinal epithelial Caco-2 cells was determined as 37.51%. The enzyme profile of L. plantarum BG24 was investigated using API ZYM test kit and the highest enzymatic activities were found for Leucine arylamidase, β-glucosidase, Valine arylamidase, β-galactosidase and N-acetyl-β-glucosaminidase. L. plantarum BG24 strain showed higher microbial growth under static conditions (6.60 OD 600 ) compared to 100 rpm (5.73 OD 600 ) and 200 rpm (5.02 OD 600 ) shaking speed due to its facultative anaerobic characteristic. However, different inoculation rates and glucose addition did not make a statistically significant difference on biomass formation (p > 0.05). The specific growth rate of L. plantarum BG24 was 0.416 h −1 , the doubling time was 1.67 h, and the biomass productivity value was 0.14 gL −1  h −1 in the original MRS broth (pH 5.7) while higher values were found as 0.483 h −1 , 1.43 h and 0.17 gL −1  h −1 , respectively, in MRS broth (pH 6.5) medium enriched with 5 g/L yeast extract. The stirred tank bioreactor was used to optimise the growth of BG24 strain. The process variables was optimized at 0.05 vvm of aeration rate, 479 rpm of agitation speed, 3% of inoculation rate and 18 h of incubation time. The maximum biomass (g/L) production was obtained as 3.84 g/L at the optimized conditions.

Rapid large-scale testing is essential for controlling the ongoing pandemic of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The standard diagnostic pipeline for testing SARS-CoV-2 presence in patients with an ongoing infection is predominantly based on pharyngeal swabs, from which the viral RNA is extracted using commercial kits, followed by reverse transcription and quantitative PCR detection. As a result of the large demand for testing, commercial RNA extraction kits may be limited and, alternatively, non-commercial protocols are needed. Here, we provide a magnetic bead RNA extraction protocol that is predominantly based on in-house made reagents and is performed in 96-well plates supporting large-scale testing. Magnetic bead RNA extraction was benchmarked against the commercial QIAcube extraction platform. Comparable viral RNA detection sensitivity and specificity were obtained by fluorescent and colorimetric reverse transcription loop-mediated isothermal amplification (RT-LAMP) using a primer set targeting the N gene, as well as RT-qPCR using a primer set targeting the E gene, showing that the RNA extraction protocol presented here can be combined with a variety of detection methods at high throughput. Importantly, the presented diagnostic workflow can be quickly set up in a laboratory without access to an automated pipetting robot.

Higher accessibility and decreasing costs of next generation sequencing (NGS), availability of commercial kits, and development of dedicated analysis pipelines, have allowed an increasing number of laboratories to adopt this technology for HIV drug resistance (HIVDR) genotyping. Conventional HIVDR genotyping is traditionally carried out using population-based Sanger sequencing, which has a limited capacity for reliable detection of variants present at intra-host frequencies below a threshold of approximately 20%. NGS has the potential to improve sensitivity and quantitatively identify low-abundance variants, improving efficiency and lowering costs. However, some challenges exist for the standardization and quality assurance of NGS-based HIVDR genotyping. In this paper, we highlight considerations of these challenges as related to laboratory, clinical, and implementation of NGS for HIV drug resistance testing. Several sources of variation and bias occur in each step of the general NGS workflow, i.e., starting material, sample type, PCR amplification, library preparation method, instrument and sequencing chemistry-inherent errors, and data analysis options and limitations. Additionally, adoption of NGS-based HIVDR genotyping, especially for clinical care, poses pressing challenges, especially for resource-poor settings, including infrastructure and equipment requirements and cost, logistic and supply chains, instrument service availability, personnel training, validated laboratory protocols, and standardized analysis outputs. The establishment of external quality assessment programs may help to address some of these challenges and is needed to proceed with NGS-based HIVDR genotyping adoption.

The safety of gluten-free foods is essential for celiac disease (CD) patients to prevent serious complications. Enzyme-linked immunosorbent assays (ELISAs) are recommended for gluten analysis to monitor the compliance of gluten-free products to the Codex threshold of 20 mg gluten/kg. However, due to the specific features of each gluten ELISA test kit, the results often deviate systematically and largely depend on the characteristics of the antibody. This comprehensive study assessed the specificities and sensitivities of three monoclonal (R5, G12, and Skerritt) and two polyclonal antibodies to the alcohol-soluble prolamin and alcohol-insoluble glutelin fractions of gluten from wheat, rye, and barley, all of which harbor CD-active epitopes. Reversed-phase high-performance liquid chromatography served as independent reference method to quantify gluten protein concentrations and allow comparisons of different gluten fractions within one kit and between kits. Wheat prolamins were detected quite accurately by all antibodies, but high variability between antibody specificities and sensitivities was observed for rye and barley prolamins and rye glutelins, and the largest discrepancies were found for wheat and barley glutelins. The gluten content (sum of prolamins and glutelins) was either overestimated up to six times (rye) or underestimated up to seven times (barley). Overestimation of gluten contents may unnecessarily limit the availability of gluten-free products, but underestimation represents a serious health risk for CD patients. It is important to consider these differences between antibodies used in kits and consider what each kit is capable of measuring, especially with samples where the source of gluten is unknown.

The p30 protein is abundantly expressed in the early stage of African swine fever virus (ASFV) infection. Thus, it is an ideal antigen candidate for serodiagnosis with the use of an immunoassay. In this study, a chemiluminescent magnetic microparticle immunoassay (CMIA) was developed for the detection of antibodies (Abs) against ASFV p30 protein in porcine serum. Purified p30 protein was coupled to magnetic beads, and the experimental conditions including concentration, temperature, incubation time, dilution ratio, buffers, and other relevant variables were evaluated and optimized. To evaluate the performance of the assay, a total of 178 pig serum samples (117 negative and 61 positive samples) were tested. According to receiver operator characteristic curve analysis, the cut-off value of the CMIA was 104,315 (area under the curve, 0.998; Youden’s index, 0.974; 95% confidence interval: 99.45 to 100%). Sensitivity results showed that the dilution ratio of p30 Abs in ASFV-positive sera detected by the CMIA is much higher when compared to commercial blocking ELISA kit. Specificity testing showed that no cross-reactivity was observed with sera positive for other porcine disease viruses. The intraassay coefficient of variation (CV) was < 5%, and the interassay CV was < 10%. The p30-magnetic beads could be stored at 4 °C for more than 15 months without loss of activity. The kappa coefficient between CMIA and INGENASA blocking ELISA kit was 0.946, showing strong agreement. In conclusion, our method showed superiority with high sensitivity, specificity, reproducibility, and stability and potentialized its application in the development of a diagnostic kit for the detection of ASF in clinical samples.Key points• ASFV tag-free p30 was successfully purified.• High sensitivity, specificity, relatively simple, and time-saving to detect antibody against ASFV were developed.• The development of CMIA will help the clinical diagnosis of ASFV and will be useful for large-scale serological test.

The polymerase chain reaction (PCR) has played a fundamental role in our understanding of the world, and has applications across a broad range of disciplines. The introduction of PCR into forensic science marked the beginning of a new era of DNA profiling. This era has pushed PCR to its limits and allowed genetic data to be generated from trace DNA. Trace samples contain very small amounts of degraded DNA associated with inhibitory compounds and ions. Despite significant development in the PCR process since it was first introduced, the challenges of profiling inhibited and degraded samples remain. This review examines the evolution of the PCR from its inception in the 1980s, through to its current application in forensic science. The driving factors behind PCR evolution for DNA profiling are discussed along with a critical comparison of cycling conditions used in commercial PCR kits. Newer PCR methods that are currently used in forensic practice and beyond are examined, and possible future directions of PCR for DNA profiling are evaluated.