Explore the vast range of titles available.

Metagenomics has been widely employed for discovery of new enzymes and pathways to conversion of lignocellulosic biomass to fuels and chemicals. In this context, the present study reports the isolation, recombinant expression, biochemical and structural characterization of a novel endoxylanase family GH10 (SCXyl) identified from sugarcane soil metagenome. The recombinant SCXyl was highly active against xylan from beechwood and showed optimal enzyme activity at pH 6,0 and 45 degree C. The crystal structure was solved at 2.75 Aa resolution, revealing the classical ( beta / alpha )8-barrel fold with a conserved active-site pocket and an inherent flexibility of the Trp281-Arg291 loop that can adopt distinct conformational states depending on substrate binding. The capillary electrophoresis analysis of degradation products evidenced that the enzyme displays unusual capacity to degrade small xylooligosaccharides, such as xylotriose, which is consistent to the hydrophobic contacts at the +1 subsite and low-binding energies of subsites that are distant from the site of hydrolysis. The main reaction products from xylan polymers and phosphoric acid-pretreated sugarcane bagasse (PASB) were xylooligosaccharides, but, after a longer incubation time, xylobiose and xylose were also formed. Moreover, the use of SCXyl as pre-treatment step of PASB, prior to the addition of commercial cellulolytic cocktail, significantly enhanced the saccharification process. All these characteristics demonstrate the advantageous application of this enzyme in several biotechnological processes in food and feed industry and also in the enzymatic pretreatment of biomass for feedstock and ethanol production.

In this work, sugarcane bagasse waste (SBW) was used as a lignocellulosic precursor to develop a high-surface-area activated carbon (AC) by thermal treatment of the SBW impregnated with KOH. This SBW activated carbon (SBWAC) was characterized by crystallinity, porosity, surface morphology and functional groups availability. The SBWAC exhibited Type I isotherm which corresponds to microporosity with high specific surface area of 709.3 m2/g and 6.6 nm of mean pore diameter. Further application of SBWAC as an adsorbent for methylene blue (MB) dye removal demonstrated that the adsorption process closely followed the pseudo-second order kinetic and Freundlich isotherm models. Conversely, a thermodynamic study revealed the endothermic nature and spontaneity of MB dye adsorption on SBWAC with high acquired adsorption capacity (136.5 mg/g). The MB dye adsorption onto SBWAC possibly involved electrostatic interaction, H-bonding and π–π interaction. This work demonstrates SBW as a potential lignocellulosic precursor to produce high-surface-area AC that can potentially remove more cationic dyes from the aqueous environment.

Bagasse is one of the wastes that can be used as goods that have a function. The purpose of this study is to utilize bagasse waste with a mixture of resin to be used as useful goods. The method used in the creation of this ring place goes through the stages of exploration (documentation, literature study, and observation), design, and embodiment. The maturity of the concept designed is very influential on the success of the realization of a work to be made. The shape chosen in creating the place of the ring is a hexagon and a cone. The basic material used is bagasse waste with resin. The techniques used in making ring holders consist of making the design and manufacturing stages of the product. Product manufacturing consists of material mixing, molding and finising.

In recent years, the research direction is shifted toward introducing new supplementary cementitious materials (SCM) in lieu of in place of Portland cement (PC) in concrete as its production emits a lot of toxic gases in the atmosphere which causes environmental pollution and greenhouse gases. SCM such as sugarcane bagasse ash (SCBA), metakaolin (MK), and millet husk ash (MHA) are available in abundant quantities and considered as waste products. The primary aim of this experimental study is to investigate the effect of SCBA, MK, and MHA on the fresh and mechanical properties of concrete mixed which contributes to sustainable development. A total of 228 concrete specimens were prepared with targeted strength of 25MPa at 0.52 water-cement ratio and cured at 28 days. It is found that the compressive strength and split tensile strength were enhanced by 17% and 14.28%, respectively, at SCBA4MK4MHA4 (88% PC, 4% SCBA, 4% MK, and 4% MHA) as ternary cementitious material (TCM) in concrete after 28 days. Moreover, the permeability and density of concrete are found to be reduced when SCBA, MK, and MHA are used separately and combined as TCM increases in concrete at 28 days, respectively. The results showed that the workability of the fresh concrete was decreased with the increase of the percentage of SCBA, MK, and MHA separately and together as TCM in concrete.

Globally, concrete is widely implemented as a construction material and is progressively being utilized because of growth in urbanization. However, limited resources and gradual depravity of the environment are forcing the research community to obtain alternative materials from large amounts of agro-industrial wastes as a partial replacement for ordinary cement. Cement is a main binding resource in concrete production. To reduce environmental problems associated with waste, this study considered the recycling of agro-industrial wastes, such as sugarcane bagasse ash (SCBA), rice husk ash (RHA), and others, into cement, and to finally bring sustainable and environmental-friendly concrete. This study considered 5%, 10%, and 15% of SBCA and RHA individually to replace ordinary Portland cement (OPC) by weight method then combined both ashes as 10%, 20%, and 30% to replace OPC to produce sustainable concrete. It was experimentally declared that the strength performance of concrete was reduced while utilizing SCBA and RHA individually and combined as supplementary cementitious material (SCM) at 7, 28, 56, and 90 days, respectively. Moreover, the initial and final setting time is increased as the quantity of replacement level of OPC with SCBA and RHA separates and together as SCM in the mixture. Based on experimental findings, it was concluded that the use of 5% of SCBA and 5% of RHA as cement replacement material individually or combined in concrete could provide appropriate results for structural applications in concrete.

After being isolated from a sugarcane pile, the bacterium Chitinophaga sp. CB10 demonstrated to be a rich source of carbohydrases, with 350 predicted CAZyme domains. CB10 was able to grow on carbohydrates of different structural complexities: glucose, carboxymethylcellulose, corn starch, galactomannan, Aloe vera gum and sugarcane bagasse. The sugarcane bagasse is a rich source of complex polymers, and the diversity of metabolites released by its enzymatic hydrolysis has an important role for green chemistry, including minority pathways such as the degradation of mannan conjugates. In this sense, CB10 demonstrated considerable levels of gene expression for mannanases, and was stable for a period of 96-144 hours in the presence of sugarcane bagasse as sole carbon source. The bacterium showed respectively 4.8x and 5.6x expression levels for two genes predicted for GH2 [beta]-mannosidase: one located within a gene cluster identified as \"polysaccharide utilization loci\" (PUL), and another a classic [beta]-mannosidase. These enzymes shared less than 45% of identity with enzymes characterized from the genus Chitinophaga belonging to the phylum Bacteroidetes. The degree of novelty-as demonstrated by the low identity with previously characterized enzymes; the remarkable capability to grow in different substrates; mannanase activity, evidenced by the release of residual oligosaccharides in the cultivation with galactomannan (HPLC-RID, 12.3 mMol); associated to the ability of mannanases expression in a low concentration of inductor conditions (sugarcane bagasse, 0.2%) indicate the high potential for the application of CB10 as a source of enzymes in the production of oligosaccharides from biomass. This capacity might prove to be very valuable for the biorefinery process of pre-biotic precursors and other functional oligosaccharides focused on the food and pharmaceutical industries.

Residual lignin affects the physical and chemical performance of lignin-containing cellulose nanofibers (LCNFs). In this work, LCNFs were prepared from sugarcane bagasse powder (SBP) through p -toluenesulfonic acid ( p -TsOH) hydrolysis and the subsequent homogenization treatment. By adjusting the concentration of p -TsOH and hydrolysis temperature, LCNFs with lignin content of 4.69–17.53% were obtained, and the effects of lignin content on the chemical structure, crystallinity, size, hydrophobicity and thermal stability of LCNFs were systematically studied. With the increase of lignin content, the diameters and average water contact angles of LCNFs were increased (from 169.65 to 781.56 nm and 39.74–86.16°, respectively), while the crystallinities were decreased. The thermal stabilities of LCNFs were decided both by lignin content and the crystallinity. The by-product lignin nanoparticles (LNPs) with an average diameter of 50–500 nm were generated with LCNFs, further improving the resource utilization value of SBP. This study provides theoretical and experimental basis for the subsequent processing of films with different hydrophobic properties and materials with higher mechanical properties and thermal stability. Graphical abstract

In this study, sugarcane bagasse was used to prepare urea phosphate activated carbons (UPACs) using a novel activator urea phosphate (UP) at three different temperatures (300 ℃, 550 ℃, and 800 ℃) to analyze the reaction mechanism during the pyrolysis process by Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy (Raman), elemental analysis, and thermogravimetric Fourier transform infrared spectroscopy-mass spectrometry (TG-FTIR-MS), to deduce the reaction mechanism of UP activation. Below 300 °C, the functional groups on the surface of sugarcane bagasse fibers undergo hydroxyl dehydration and oxidation reactions, and molecular chains were broken to produce H2O, CH4, CO2, H2, HCHO, and NH3 small molecule gas products. At 300–800 °C was the main temperature range for activation reactions, and the molecular structure gradually formed an ordered carbon network structure. Nitrogen-containing compounds were gradually transformed into graphite N and oxidized N as temperature increased and functional groups containing phosphorus underwent decomposition. Above 800 °C, the pyrolysis was basically complete. Phosphorus compounds were completely decomposed, with fewer macromolecular products and gaseous products being mainly H2O, CO2, CO, and HCHO.

A challenge facing the biofuel industry is to develop an economically viable and sustainable biorefinery. The existing potential biorefineries in Louisiana, raw sugar mills, operate only 3 months of the year. For year-round operation, they must adopt other feedstocks, besides sugar cane, as supplemental feedstocks. Energy cane and sweet sorghum have different harvest times, but can be processed for bio-ethanol using the same equipment. Juice of energy cane contains 9.8% fermentable sugars and that of sweet sorghum, 11.8%. Chemical composition of sugar cane bagasse was determined to be 42% cellulose, 25% hemicellulose, and 20% lignin, and that of energy cane was 43% cellulose, 24% hemicellulose, and 22% lignin. Sweet sorghum was 45% cellulose, 27% hemicellulose, and 21% lignin. Theoretical ethanol yields would be 3,609 kg per ha from sugar cane, 12,938 kg per ha from energy cane, and 5,804 kg per ha from sweet sorghum.