Explore the vast range of titles available.

An attempt was made, using computational methods, to understand whether the intermolecular interactions in the dimers of molybdenum dichalcogenides MoCh2 (Ch = chalcogen, element of group 16, especially S, Se and Te) and similar mixed-chalcogenide derivatives resemble the room temperature experimentally observed interactions in the interfacial regions of molybdenites and their other mixed-chalcogen derivatives. To this end, MP2(Full)/def2-TVZPPD level electronic structure calculations on nine dimer systems, including (MoCh2)2 and (MoChCh′2)2 (Ch, Ch′ = S, Se and Te), were carried out not only to demonstrate the energetic stability of these systems in the gas phase, but also to reproduce the intermolecular geometrical properties that resemble the interfacial geometries of 2D layered MoCh2 systems reported in the crystalline phase. Among the six DFT functionals (single and double hybrids) benchmarked against MP2(full), it was found that the double hybrid functional B2PLYPD3 has some ability to reproduce the intermolecular geometries and binding energies. The intermolecular geometries and binding energies of all nine dimers are discussed, together with the charge density topological aspects of the chemical bonding interactions that emerge from the application of the quantum theory of atoms in molecules (QTAIM), the isosurface topology of the reduced density gradient noncovalent index, interaction region indicator and independent gradient model (IGM) approaches. While the electrostatic surface potential model fails to explain the origin of the S···S interaction in the (MoS2)2 dimer, we show that the intermolecular bonding interactions in all nine dimers examined are a result of hyperconjugative charge transfer delocalizations between the lone-pair on (Ch/Ch′) and/or the π-orbitals of a Mo–Ch/Ch′ bond of one monomer and the dπ* anti-bonding orbitals of the same Mo–Ch/Ch′ bond in the second monomer during dimer formation, and vice versa. The HOMO–LUMO gaps calculated with the MN12-L functional were 0.9, 1.0, and 1.1 eV for MoTe2, MoSe2 and MoS2, respectively, which match very well with the solid-state theoretical (SCAN-rVV10)/experimental band gaps of 0.75/0.88, 0.90/1.09 and 0.93/1.23 eV of the corresponding systems, respectively. We observed that the gas phase dimers examined are perhaps prototypical for a basic understanding of the interfacial/inter-layer interactions in molybdenum-based dichalcogenides and their derivatives.

The increasing demand for high energy storage devices calls for concurrently enhanced dielectric constants and reduced dielectric losses of polymer dielectrics. In this work, we rationally design dielectric composites comprising aligned 2D nanofillers of reduced graphene oxide (rGO) and boron nitride nanosheets (BNNS) in a polyvinylidene fluoride (PVDF) matrix through a novel press-and-fold technique. Both nanofillers play different yet complementary roles: while rGO is designed to enhance the dielectric constant through charge accumulation at the interfaces with polymer, BNNS suppress the dielectric loss by preventing the mobility of free electrons. The microlaminate containing eight layers each of rGO/PVDF and BNNS/PVDF films exhibits remarkable dielectric performance with a dielectric constant of 147 and an ultralow dielectric loss of 0.075, due to the synergistic effect arising from the alternatingly electrically conductive and insulating films. Consequently, a maximum energy density of 3.5 J/cm3—about 18 times the bilayer composite counterpart—is realized. The high thermal conductivities of both nanofillers and their alignment endow the microlaminate with an excellent in-plane thermal conductivity of 6.53 Wm−1K−1, potentially useful for multifunctional applications. This work offers a simple but effective approach to fabricating a composite for high dielectric energy storage using two different 2D nanofillers.

For organic solar cells (OSCs), bridging the gap with Shockley–Queisser limit necessitates simultaneously reducing the energy loss for a high open-circuit voltage, improving light utilization for enhanced short-circuit current density and maintaining ideal nanomorphology with a high fill factor through molecular design and device engineering. Here we design and synthesize an asymmetric non-fullerene acceptor (Z8) featuring tethered phenyl groups to establish an alloy acceptor in ternary OSCs. The asymmetric structure minimizes non-radiative energy loss and charge recombination owing to delocalized excitons. The phenyl-substituted alkyl side chain impacts on the intermolecular interactions, improving the film nanomorphology with efficient exciton dissociation and reduced charge recombination. We demonstrate OSCs with an efficiency of 20.2% (certified 19.8%) based on the D18:Z8:L8-BO ternary blend. Through theoretical calculations, we examine the overall distribution of photon and carrier losses and analyse the potential for improvement on open-circuit voltage, short-circuit current density and fill factor, providing rational guidance for further development of the OSC performance. Molecular design is key to the power conversion efficiency in organic photovoltaics. Jiang, Sun, Xu et al. develop a non-fullerene acceptor with asymmetric structure and phenyl-substituted side chains that minimizes photon and carrier losses, enabling 20.2% efficiency.

Two-dimensional nanofluidic channels are emerging candidates for capturing osmotic energy from salinity gradients. However, present two-dimensional nanofluidic architectures are generally constructed by simple stacking of pristine nanosheets with insufficient charge densities, and exhibit low-efficiency transport dynamics, consequently resulting in undesirable power densities (<1 W m −2 ). Here we demonstrate MXene/Kevlar nanofiber composite membranes as high-performance nanofluidic osmotic power generators. By mixing river water and sea water, the power density can achieve a value of approximately 4.1 W m −2 , outperforming the state-of-art membranes to the best of our knowledge. Experiments and theoretical calculations reveal that the correlation between surface charge of MXene and space charge brought by nanofibers plays a key role in modulating ion diffusion and can synergistically contribute to such a considerable energy conversion performance. This work highlights the promise in the coupling of surface charge and space charge in nanoconfinement for energy conversion driven by chemical potential gradients. Nanofluidic channels can capture osmotic energy from salinity gradients, but output power densities should be improved for practical applications. Here the authors report high-strength nanosheet/nanofiber composite membranes for harvesting osmotic energy from natural water with high output power.

Porous yet densely packed carbon electrodes with high ion-accessible surface area and low ion transport resistance are crucial to the realization of high-density electrochemical capacitive energy storage but have proved to be very challenging to produce. Taking advantage of chemically converted graphene's intrinsic microcorrugated two-dimensional configuration and self-assembly behavior, we show that such materials can be readily formed by capillary compression of adaptive graphene gel films in the presence of a nonvolatile liquid electrolyte. This simple soft approach enables subnanometer scale integration of graphene sheets with electrolytes to form highly compact carbon electrodes with a continuous ion transport network. Electrochemical capacitors based on the resulting films can obtain volumetric energy densities approaching 60 watt-hours per liter.

Supercapacitors, also called ultracapacitors or electrochemical capacitors, store electrical charge on high-surface-area conducting materials. Their widespread use is limited by their low energy storage density and relatively high effective series resistance. Using chemical activation of exfoliated graphite oxide, we synthesized a porous carbon with a Brunauer-Emmett-Teller surface area of up to 3100 square meters per gram, a high electrical conductivity, and a low oxygen and hydrogen content. This sp 2 -bonded carbon has a continuous three-dimensional network of highly curved, atom-thick walls that form primarily 0.6- to 5-nanometer-width pores. Two-electrode supercapacitor cells constructed with this carbon yielded high values of gravimetric capacitance and energy density with organic and ionic liquid electrolytes. The processes used to make this carbon are readily scalable to industrial levels.

As an emerging technology for harvesting mechanical energy, low surface charge density greatly hinders the practical applications of triboelectric nanogenerators (TENGs). Here, a high-performance TENG based on charge shuttling is demonstrated. Unlike conventional TENGs with static charges fully constrained on the dielectric surface, the device works based on the shuttling of charges corralled in conduction domains. Driven by the interaction of two quasi-symmetrical domains, shuttling of two mirror charge carriers can be achieved to double the charge output. Based on the mechanism, an ultrahigh projected charge density of 1.85 mC m −2 is obtained in ambient conditions. An integrated device for water wave energy harvesting is also presented, confirming its feasibility for practical applications. The device provides insights into new modes of TENGs using unfixed charges in domains, shedding a new light on high-performance mechanical energy harvesting technology. Conventionally, triboelectric nanogenerators are based on static charges fixed on dielectric surfaces. Here, the authors report a new mechanism using shuttling of mirror charge carriers corralled in quasi-symmetrical conduction domains, which boosts performance for blue energy harvesting.

We report on the intrinsic optoelectronic response of high-quality dual-gated monolayer and bilayer graphene p-n junction devices. Local laser excitation (of wavelength 850 nanometers) at the p-n interface leads to striking six-fold photovoltage patterns as a function of bottom-and top-gate voltages. These patterns, together with the measured spatial and density dependence of the photoresponse, provide strong evidence that nonlocal hot carrier transport, rather than the photovoltaic effect, dominates the intrinsic photoresponse in graphene. This regime, which features a long-lived and spatially distributed hot carrier population, may offer a path to hot carrier-assisted thermoelectric technologies for efficient solar energy harvesting.