Explore the vast range of titles available.

Cuttlefish, a unique group of marine mollusks, produces an internal biomineralized shell, known as cuttlebone, which is an ultra-lightweight cellular structure (porosity, ∼93 vol%) used as the animal’s hard buoyancy tank. Although cuttlebone is primarily composed of a brittle mineral, aragonite, the structure is highly damage tolerant and can withstand water pressure of about 20 atmospheres (atm) for the species Sepia officinalis. Currently, our knowledge on the structural origins for cuttlebone’s remarkable mechanical performance is limited. Combining quantitative three-dimensional (3D) structural characterization, four-dimensional (4D) mechanical analysis, digital image correlation, and parametric simulations, here we reveal that the characteristic chambered “wall–septa” microstructure of cuttlebone, drastically distinct from other natural or engineering cellular solids, allows for simultaneous high specific stiffness (8.4 MN·m/kg) and energy absorption (4.4 kJ/kg) upon loading. We demonstrate that the vertical walls in the chambered cuttlebone microstructure have evolved an optimal waviness gradient, which leads to compression-dominant deformation and asymmetric wall fracture, accomplishing both high stiffness and high energy absorption. Moreover, the distribution of walls is found to reduce stress concentrationswithin the horizontal septa, facilitating a larger chamber crushing stress and a more significant densification. The design strategies revealed here can provide important lessons for the development of low-density, stiff, and damage-tolerant cellular ceramics.

Natural and renewable sources of calcium carbonate (CaCO3), also referred to as “biogenic” sources, are being increasingly investigated, as they are generated from a number of waste sources, in particular those from the food industry. The first and obvious application of biogenic calcium carbonate is in the production of cement, where CaCO3 represents the raw material for clinker. Overtime, other more added-value applications have been developed in the filling and modification of the properties of polymer composites, or in the development of biomaterials, where it is possible to transform calcium carbonate into calcium phosphate for the substitution of natural hydroxyapatite. In the majority of cases, the biological structure that is used for obtaining calcium carbonate is reduced to a powder, in which instance the granulometry distribution and the shape of the fragments represent a factor capable of influencing the effect of addition. As a result of this consideration, a number of studies also reflect on the specific characteristics of the different sources of the calcium carbonate obtained, while also referring to the species-dependent biological self-assembly process, which can be defined as a more “biomimetic” approach. In particular, a number of case studies are investigated in more depth, more specifically those involving snail shells, clam shells, mussel shells, oyster shells, eggshells, and cuttlefish bones.

Fabrication of three-dimensional (3D) scaffolds using natural biomaterials introduces valuable opportunities in bone tissue reconstruction and regeneration. The current study aimed at the development of paste-like 3D printing inks with an extracellular matrix-inspired formulation based on marine materials: sodium alginate (SA), cuttlebone (CB), and fish gelatin (FG). Macroporous scaffolds with microporous biocomposite filaments were obtained by 3D printing combined with post-printing crosslinking. CB fragments were used for their potential to stimulate biomineralization. Alginate enhanced CB embedding within the polymer matrix as confirmed by scanning electron microscopy (ESEM) and micro-computer tomography (micro-CT) and improved the deformation under controlled compression as revealed by micro-CT. SA addition resulted in a modulation of the bulk and surface mechanical behavior, and lead to more elongated cell morphology as imaged by confocal microscopy and ESEM after the adhesion of MC3T3-E1 preosteoblasts at 48 h. Formation of a new mineral phase was detected on the scaffold’s surface after cell cultures. All the results were correlated with the scaffolds’ compositions. Overall, the study reveals the potential of the marine materials-containing inks to deliver 3D scaffolds with potential for bone regeneration applications.

The research focuses on the synthesis and characterization of chitosan nanoparticles derived from the cuttlebone of Sepia prashadi . The primary objective is to evaluate the effectiveness of these nanoparticles in combating cancer within the MG63 human osteosarcoma cell line. Healthcare professionals create chitosan, a naturally derived compound, by extracting a portion from cuttlebone. Chitosan nanoparticles were produced through a technique known as ionic gelation, which is a widely used method for forming stable nanoparticles. We employed various techniques such as Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray diffraction (XRD) to evaluate the quality of the nanoparticles we synthesized. The tests confirmed the proper synthesis, stability, appropriate size distribution, and uniform surface of the nanoparticles. Tests evaluating the ability of nanoparticles to target cancer were carried out in a laboratory with MG63 cell lines. These assessments examined the toxicological properties of the nanoparticles and their prospective use in medical treatments. The results showed that as the dose increased, fewer cells survived, suggesting a potential anti-cancer effect. The findings suggest that chitosan nanoparticles derived from S. prashadi cuttlebone show great promise as a safe and eco-friendly source for cancer treatment.

Background: The efficacy of cuttlebone for treating hyperphosphatemia in patients with end-stage renal disease and its safety remained unclear. Methods: Randomized controlled trials comparing the efficacy of cuttlebone with conventional interventions were retrieved from MEDLINE, EMBASE, Cochrane Library, Airiti Library, and other major Chinese databases until 1 February 2023. The primary outcome was circulating phosphate concentration, while secondary outcomes included circulating calcium and intact parathyroid hormone levels, calcium–phosphorus product, and treatment-related side-effects. Results: Analysis of nine studies published between 2000 and 2019 including 726 participants showed a lower circulating phosphate concentration in the cuttlebone group than in controls [mean difference (MD) = −0.23, 95% CI: −0.39 to −0.06, p = 0.006, I 2 = 94%, 726 patients] and a dose-dependent effect of cuttlebone against hyperphosphatemia. Therapeutic benefits were noted after both short-term (1–2 months) and long-term (3–6 months) treatments. Besides, patients receiving hemodialysis showed a better response to cuttlebone than those receiving peritoneal dialysis. There was no difference in circulating calcium level (mean difference = 0.03, 95% CI: −0.01 to 0.07, p = 0.17, I 2 = 34%, 654 patients), while patients receiving cuttlebone showed lower circulating iPTH level and calcium-phosphorus product (MD = −43.63, 95% CI: −74.1 to −13.16, p = 0.005, I 2 = 76%, 654 patients), (MD = −0.38, 95% CI: −0.38 to −0.01, p = 0.04, I 2 = 83%, 520 patients). No difference in the risks of constipation, gastrointestinal discomfort, and elevated blood calcium was noted between the two groups. Conclusion: Compared with conventional phosphate-binding agents, cuttlebone more efficiently suppressed hyperphosphatemia with a dose-dependent effect. The limited number of included studies warrants further clinical investigations to verify our findings. Systematic Review Registration: https://www.crd.york.ac.uk/prospero/ , identifier CRD42023396300.

Since ancient times, the shells of marine molluscs have been used as a therapeutic and/or prophylactic resource. In Spain, they were part of practical guides for doctors or pharmacists until the 19th century. In general, seashells were prepared by dissolving in vinegar and were part of plasters or powders used as toothpaste, or to treat dyspepsia, heartburn and leprosy. Thus, the nacre or mother-of-pearl of various molluscs was regularly used in the Royal Colleges of Surgery and in hospitals during the times of the Cortes of Cadiz, as a medicine in galenic preparations based on powders. In contemporary Spanish ethnomedicine, seashells, with a high symbolic value, have been used as an amulet to prevent cracks in the breasts and promote their development during lactation, to avoid teething pain in young children, to eliminate stains on the face or to cure erysipelas. But, as in other countries, products derived from seashells have also been empirically applied. The two resources used traditionally have been the cuttlebone, the internal shell of cuttlefish and the nacre obtained from the external shells of some species. Cuttlebone, dried and pulverised, has been applied externally to cure corneal leukoma and in dental hygiene. In the case of nacre, a distinction must be made between chemical and physical remedies. Certain seashells, macerated in lemon juice, were used in coastal areas to remove spots on the face during postpartum. However, the most common practice in Spain mainland was to dissolve mother-of-pearl buttons in lemon juice (or vinegar). The substance thus obtained has been used to treat different dermatological conditions of the face (chloasma, acne), as well as to eliminate freckles. For the extraction of foreign bodies in the eyes, a very widespread traditional remedy has been to introduce small mother-of-pearl buttons under the lid. These popular remedies and practices are compared with those collected in classic works of medicine throughout history, and data on the pharmacological activity and pharmaceutical applications of the products used are provided. The use of cuttlebone powders is supported by different works on anti-inflammatory, immune-modulatory and/or wound healing properties. Nacre powder has been used in traditional medicines to treat palpitations, convulsions or epilepsy. As sedation and a tranquilisation agent, nacre is an interesting source for further drug development. Likewise, nacre is a biomaterial for orthopaedic and other tissue bioengineering applications. This article is a historical, cultural and anthropological view that can open new epistemological paths in marine-derived product research.

Lightweight porous materials with high load-bearing, damage tolerance and energy absorption (EA) as well as intelligence of shape recovery after material deformation are beneficial and critical for many applications, e.g. aerospace, automobiles, electronics, etc. Cuttlebone produced in the cuttlefish has evolved vertical walls with the optimal corrugation gradient, enabling stress homogenization, significant load bearing, and damage tolerance to protect the organism from high external pressures in the deep sea. This work illustrated that the complex hybrid wave shape in cuttlebone walls, becoming more tortuous from bottom to top, creates a lightweight, load-bearing structure with progressive failure. By mimicking the cuttlebone, a novel bionic hybrid structure (BHS) was proposed, and as a comparison, a regular corrugated structure and a straight wall structure were designed. Three types of designed structures have been successfully manufactured by laser powder bed fusion (LPBF) with NiTi powder. The LPBF-processed BHS exhibited a total porosity of 0.042% and a good dimensional accuracy with a peak deviation of 17.4 μ m. Microstructural analysis indicated that the LPBF-processed BHS had a strong (001) crystallographic orientation and an average size of 9.85 μ m. Mechanical analysis revealed the LPBF-processed BHS could withstand over 25 000 times its weight without significant deformation and had the highest specific EA value (5.32 J·g −1 ) due to the absence of stress concentration and progressive wall failure during compression. Cyclic compression testing showed that LPBF-processed BHS possessed superior viscoelastic and elasticity energy dissipation capacity. Importantly, the uniform reversible phase transition from martensite to austenite in the walls enables the structure to largely recover its pre-deformation shape when heated (over 99% recovery rate). These design strategies can serve as valuable references for the development of intelligent components that possess high mechanical efficiency and shape memory capabilities. The porous chambered structure of cuttlebone has the optimal waviness gradient vertical walls. Bionic hybrid structure (BHS) was proposed and manufactured using laser powder bed fusion. BHS can withstand a load equivalent to 25 000 times its weight without significant deformation. BHS effectively reduces stress concentration and achieves a shape recovery rate of over 99%.

Hydroxyapatite (HA), a bioceramic, is a widely utilized material for bone tissue repair and regeneration because of its excellent properties such as biocompatibility, exceptional mechanical strength, and osteoconductivity. HA can be obtained by both synthetic and natural means. Animal bones are often considered a promising natural resource for the preparation of pure HA for biological and biomedical applications. Cuttlefish bone, also called as cuttlebone, mainly consists of calcium carbonate, and pure HA can be produced by adding phosphoric acid or ammonium hydrogen phosphate to it. Recently, cuttlefish bone-derived HA has shown promising results in terms of bone tissue repair and regeneration. The synthesized cuttlefish bone-derived has shown excellent biocompatibility, cell proliferation, increased alkaline phosphate activity, and efficient biomineralization ability with mesenchymal stem cells and osteoblastic cells. To further improve the biological properties of cuttlefish bone-derived HA, bioglass, polycaprolactone, and polyvinyl alcohol were added to it, which gave better results in terms of cell proliferation and osteogenic differentiation. Cuttlefish bone-derived HA with polymeric substances provides excellent bone formation under in vivo conditions. The studies indicate that cuttlefish bone-derived HA, along with polymeric and, protein materials, will be promising biomaterials in the field of bone tissue regeneration.

Musculoskeletal disorders in the elderly have significantly increased due to the increase in an ageing population. The treatment of these diseases necessitates surgical procedures, including total joint replacements such as hip and knee joints. Over the years a number of treatment options have been specifically established which are either permanent or use temporary natural materials such as marine skeletons that possess unique architectural structure and chemical composition for the repair and regeneration of bone tissue. This review paper will give an overview of presently used materials and marine structures for hard tissue repair and regeneration, drugs of marine origin and other marine products which show potential for musculoskeletal treatment.