Catalogue Search | MBRL
Search Results Heading
Explore the vast range of titles available.
MBRLSearchResults
-
DisciplineDiscipline
-
Is Peer ReviewedIs Peer Reviewed
-
Item TypeItem Type
-
SubjectSubject
-
YearFrom:-To:
-
More FiltersMore FiltersSourceLanguage
Done
Filters
Reset
201
result(s) for
"depositional processes"
Sort by:
Snow‐Atmosphere Humidity Exchange at the Ice Sheet Surface Alters Annual Mean Climate Signals in Ice Core Records
2023
Surface processes alter the water stable isotope signal of the surface snow after deposition. However, it remains an open question to which extent surface post‐depositional processes should be considered when inferring past climate information from ice core records. Here, we present simulations for the Greenland Ice Sheet, combining outputs from two climate models with an isotope‐enabled snowpack model. We show that surface vapor exchange and associated fractionation imprint a climate signal into the firn, resulting in an increase in the annual mean value of δ18O by +2.3‰ and a reduction in d‐excess by −6.3‰. Further, implementing isotopic fractionation during surface vapor exchange improves the representation of the observed seasonal amplitude in δ18O from 65.0% to 100.2%. Our results stress that surface vapor exchange is important in the climate proxy signal formation and needs consideration when interpreting ice core climate records. Plain Language Summary The climate information contained in falling snow is modified by exchange processes with the atmosphere after the snow has fallen to the surface. It is important to understand how this modification affects the interpretation of past climate information from ice core isotope records. In this study, we combined outputs from two climate models to simulate the climate signal in a snow core on the Greenland Ice Sheet. We evaluate the snow core model using snow observations from the Greenland Ice Sheet. By simulating snow cores with and without the modification at the surface, we find a considerable impact of the surface modification on the climate signal in the snow core. Further, considering the surface modification causes an improved representation of the seasonal changes compared to observations. Our findings highlight the importance of surface processes in forming climate information contained in ice cores and underscore the need to include these processes in the ice core interpretation. Key Points Water isotopic fractionation during vapor exchange significantly affects the simulated annual and seasonal isotope climate signal in ice cores The simulated seasonal amplitude of the δ18O signal in the snowpack improves when including surface vapor exchange induced fractionation A phase shift in the simulated seasonal maximum in d‐excess toward early autumn is induced by vapor exchange, consistent with observations
Journal Article
Late Holocene Stratigraphy and Sedimentary Facies Distribution of an Anthropogenically Modified Delta Plain (Santee River Delta, South Carolina, U.S.A.)
by
Hanebuth, Till J.J.
,
Hawkes, Andrea D.
,
Long, Joshua H.
in
anthropogenic coastal system
,
Delta
,
depositional processes
2024
Long, J.H.; Hanebuth, T.J.J.; Durica, J.T., and Hawkes, A.D., 2024. Late Holocene stratigraphy and sedimentary facies distribution of an anthropogenically modified delta plain (Santee River Delta, South Carolina, U.S.A.). Journal of Coastal Research, 40(4), 623–646. Charlotte (North Carolina), ISSN 0749-0208. The Santee River of South Carolina has the second largest watershed in the eastern United States and forms the largest river-fed delta along the U.S. east coast. Anthropogenic modifications to the delta plain of the Santee River, and in many coastal environments within the region, have significantly altered the natural configurations of floodplains, channels, and shorelines. This study incorporated historic and modern state-of-the-art data sets and methods to evaluate the sediment distribution within the modern delta plain as well as the record of environmental change throughout the late Holocene as it is preserved within the subsurface stratigraphy. The study incorporated high-resolution seismo-acoustic and bathymetric data, detailed sediment core analysis, accelerator mass spectrometry 14C dating, micropaleontological analysis, and surface sediment samples to define geomorphic zones based on dominant depositional processes related to fluvial discharge, tides, and waves. Tidal- and wave-influenced conditions were established in the delta plain by around 3 kyr BP and continued into historic times, when the construction of rice fields across most of the delta plain fixed channel positions and isolated floodplains from flood-related sedimentation. Sediment distribution in the modern delta plain is significantly influenced by the maintained network of artificial canals and embankments associated with these historic fields. The influence of these modifications can also be seen within the stratigraphy beneath the delta plain, recording local changes in deposition and erosion that resulted from a modification in water circulation and sediment supply.
Journal Article
Sedimentary processes and patterns in deposits corresponding to freshwater lake-facies of hyperpycnal flow – An experimental study based on flume depositional simulations
by
Kang, Yongmei
,
Zhou, Xinping
,
Dai, Rong
in
depositional patterns
,
depositional processes
,
Freshwater lakes
2024
The article establishes a depositional model for lacustrine hyperpycnal flow by examining dynamics, transport factors, and laminae formation. The results show that several typical experimental phenomena such as fluid front mixing, double flow division, underwater leap, water skiing, and “new head” can be observed in the flume experiment. Based on the experimental observation of the flow process, three modes of transport of hyperpycnal flow in freshwater lake basins are summarized: bottom-bed loading, suspended loading, and uplift loading. Further, the change of fluid properties in hyperpycnal flow is summarized in three stages: a high-concentration stage, a low-concentration stage, and an uplifting stage. There are two main factors affecting the long-range transport of hyperpycnal flow: (1) the concentration difference between the head deposits and the ambient water body and (2) shear force of turbulence in the upper part of hyperpycnal flow. The simulation experiments of hyperpycnites laminae show that the laminae change from continuous to intermittent with the increase of the transportation distance. It is clear that the mode of transport of the hyperpycnal flow has a controlling effect on the degree of development of the laminae. Eventually, a depositional model of lake-facies hyperpycnal flow under experimental conditions was constructed.
Journal Article
Depositional processes and environmental settings in rock shelters: the case of the prehistoric Oscurusciuto site (Southern Italy)
2021
Clastic successions in rock shelters commonly host important archaeological findings, especially of prehistoric and protostoric times. The understanding of depositional and post-depositional processes in these environments is crucial to understand the lifestyle settings of humans, as well as the reliability of archaeological data obtained during excavations. Rock shelters are genetically related to caves, but while depositional processes in caves are generally well known, less information is available concerning the depositional processes active in rock shelters. This paper tries to contribute to this issue, describing the sedimentary succession exposed at the Oscurusciuto rock shelter (Ginosa, Southern Italy). This is one of the most important Middle Palaeolithic sites of the Italian peninsula, and its sedimentary infill hosts witnesses of very late Neanderthal populations that lived in Italy just before their total decline and complete replacement by Modern Humans (MH). This work presents the results of a sedimentologically based study integrated with an ichnological study of selected beds. The combination of these two methodologies allowed us to: (i) define the main depositional processes active in the rock shelter environment, as well as the relationships between different processes; (ii) discuss the meaning of peculiar ichnofabrics recognized at the site, and (iii) discuss the meaning of structureless strata at an archeological site in the framework of human trampling vs bioturbation as a cause of the obliteration of primary sedimentary structures.
Journal Article
Grain size distribution and characterization of sedimentary processes of Cox's Bazar Beach, Bangladesh: Implications for understanding coastal morphodynamics
by
Haque, Md. Masidul
,
Haque, Mozammal
,
Hoyanagi, Koichi
in
Beaches
,
Coastal currents
,
Coastal management
2026
This study aims to investigate the factors influencing modern beach development along the southeastern Bengal Basin coast by analyzing the grain size and heavy mineral (HM) distribution in sediment. This study provides insight into the granulometric characteristics, depositional environments, and sedimentation processes that shape the coast. Eighty surficial beach samples were collected from Kakra in the north, Inani, and Teknaf in the south, along Cox's Bazar Beach to characterize the sediment. The fine-to medium-grained (1.76–2.54 φ), well-to moderately well-sorted (0.34–1.23 φ), nearly symmetrical ((−0.10)–0.03), and mesokurtic (0.93–1.28) sands indicate the uniformity of the grain sizes. The bivariant plot of the grain size parameters, linear and multivariate discriminant functions, and course (one percentile value) to medium (C−M) diagram reveal that the sediment was deposited in an aeolian, shallow agitated, turbidity-influenced beach environment. The sand has higher concentrations of HMs in the swash zone (4.9 %–19.1 %), followed by the surf zone (3.5 %–12.3 %), backshore area (2.2 %–12 %), and dunes (2.5 %–6.2 %). The spatial distribution of the grain parameters indicates that moderately well-sorted medium-grained sand was deposited in the swash zone, whereas well-sorted to very well-sorted fine-grained sand was found toward the land. Waves with strongly asymmetric currents carry sediment from offshore areas in a turbulent manner, resulting in coarser sand and a greater proportion of HM deposits in the swash zone and finer particles back to the ocean. In contrast, the wind carries sediment landward, forming dunes. The oblique approach of waves along the coast results in the formation of longshore currents, which influence sediment movement and lead to decreasing grain sizes from south to north. Overall, this study enhances the understanding of the factors influencing modern beach development along the Bengal Basin coast, providing valuable insight into coastal sedimentation and its management.
[Display omitted]
•Medium-grained sand dominates the surf and swash zones, while fine-grained sand is found in the backshore area and dunes.•The swash zone has highest concentration of heavy minerals, followed by the surf zone, backshore area, and dunes.•Waves transport coarser sediment in a turbulent manner, while wind carries finer sediment landward.•Marine wave and tidal reworking, longshore drift, and some fluvial input are the dominant sedimentation processes.
Journal Article
Sedimentologic and stratigraphic criteria to distinguish between basin‐floor and slope mudstones: Implications for the delivery of mud to deep‐water environments
by
Hodgson, David M.
,
Flint, Stephen S.
,
Taylor, Kevin T.
in
basin‐floor
,
Boreholes
,
depositional processes
2022
Deep‐water mudstones overlying basin‐floor and slope sandstone‐prone deposits are often interpreted as hemipelagic drapes deposited during sand starvation periods. However, mud transport and depositional processes, and resulting facies and architecture of mudstones in deep‐water environments, remain poorly understood. This study documents the sedimentology and stratigraphy of basin‐floor and slope mudstones intercalated with sandstone‐prone deposits of the Laingsburg depocentre (Karoo Basin, South Africa). Sedimentologic and stratigraphic criteria are presented here to distinguish between slope and basin‐floor mudstones, which provide a tool to refine palaeogeographical reconstructions of other deep‐water successions. Several mudstone units were mapped at outcrop for 2500 km2 and investigated using macroscopic and microscopic core descriptions from two research boreholes. Basin‐floor mudstones exhibit a repeated and predictable alternation of bedsets dominated by low‐density turbidites, and massive packages dominated by debrites, with evidence of turbulent‐to‐laminar flow transformations. Slope mudstones exhibit a similar facies assemblage, but the proportion of low‐density turbidites is higher, and no repeated or predictable facies organisation is recognised. The well‐ordered and predictable facies organisation of basin‐floor mudstones suggest local point sources from active slope conduits, responsible for deposition of compensationally stacked muddy lobes. The lack of predictable facies organisation in slope mudstones suggests deposition took place in a more variable range of sub‐environments (i.e. ponded accommodation, minor gully/channel‐fills, levees). However, regional mapping of three mudstone units evidence basinward tapering and similar thicknesses across depositional strike. This geometry is consistent with the distal part of basin margin clinothems, and suggests laterally extensive mud delivery across the shelf edge combined with along‐margin transport processes. Therefore, the sedimentology and geometry of mudstones suggests that mud can be delivered to deep‐water dominantly by sediment gravity flows through point source and distributed regionally, during periods of up‐dip sand storage. These findings challenge the common attribution of deep‐water mudstones to periods of basin‐floor sediment starvation. This multi‐scale study documents the sedimentology and stratigraphy of basin‐floor and slope mudstones intercalated with sandstone‐prone deposits of the Laingsburg depocentre (Karoo Basin, South Africa). For the first time, we present a set of criteria to distinguish between submarine slope and basin‐floor mudstones. The results highlight that deep‐water mud can be dominantly delivered by sediment gravity flows by a combination of laterally extensive supply and point‐source delivery systems during periods of up‐dip sand storage, challenging the model of deep‐water sediment starvation.
Journal Article
Coastal Depositional Responses to Relative Sea-Level Rise: Insights from a Superimposed Sandstone–Shale–Coal Reservoir in the Linxing Gas Field, China
2023
The Ximing Sandstone-to-No. 9 Coal succession of the Taiyuan Formation in the Linxing gas field records a complex internal architecture of a transgressive succession developed in the western coast of the late Pennsylvanian North China epeiric sea. Facies and sequence stratigraphic analyses reveal its depositional evolution from fluvial channels through fluvial-dominated and tide-influenced inner estuaries to tide-dominated estuaries and finally to wave-dominated barrier lagoons. The evolution from fluvial- to tide-dominated deposition has been ascribed to the funnel-shaped valley coupled with an increased tidal prism induced by the upstepping and backstepping shoreline. The evolution from tide- to wave-dominated deposition has been ascribed to the wide North China epeiric seaway lacking local coastline irregularities after the incised-valley fill that provided sufficient fetch for the occurrence of large storm waves. Grain-size analysis reveals the relative importance of traction, saltation, dispersed suspension, and flocculated suspension in the development of the transgressive estuarine to lagoonal deposits. This study not only contributes to a proper understanding of coastal depositional response to the relative sea-level rise but also provides a context within which to interpret the symbiotic relationship of the superimposed sandstone–shale–coal reservoirs and predict the distribution of favorable unconventional gas production formation.
Journal Article
Depositional Processes and Paleoenvironmental Evolution of the Middle Eocene Lacustrine Shale in Beibu Gulf Basin, South China
by
Li, Guocui
,
Li, Yifan
,
Huang, Ruoxin
in
Carbonate minerals
,
Chemical weathering
,
Climate change
2025
This study focuses on the middle Eocene lacustrine shales of the Lower Member 2 of the Liushagang Formation (L–LS2) in the Weixi’nan Depression of the Beibu Gulf Basin. Employing an integrated approach that combines core observation, thin-section analysis, Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), and geochemical proxies, we systematically characterize the lithofacies, sedimentary processes, and paleoenvironmental evolution. Six distinct lithofacies were identified: clay-rich mudstone, calcium-bearing mudstone, clay-rich siltstone, siliceous siltstone, ankerite-bearing sandstone, and siliceous sandstone. Based on depositional processes and structural features, these are grouped into three lithofacies assemblages: interbedded lithofacies assemblage, laminated lithofacies assemblage, and matrix lithofacies assemblage. Vertical facies distribution shows that the interbedded lithofacies assemblage dominates the lower L–LS2, reflecting active faulting, volcanism, a low lake level, prevalent gravity flows, and episodic oxidative conditions. The laminated lithofacies assemblage dominates the middle section and results from the combined influence of chemical and mechanical deposition, indicating fluctuating climate conditions that affected water depth, salinity, and redox dynamics. The upper section is characterized by matrix lithofacies assemblage, representing a stable, deep water, anoxic environment with low energy suspension settling. We propose a depositional model in which tectonics and climate jointly control lacustrine shale deposition. During the middle Eocene, intensified tectonic activity expanded accommodation space and increased clastic input, while climate fluctuations influenced chemical weathering, nutrient supply, and salinity. Together, these factors drove lake deepening and variability, affecting sedimentary energy and redox conditions. This study not only clarifies the sedimentary evolution of L–LS2 but also provides a critical geological framework for lacustrine shale oil exploration.
Journal Article
Effects of Depositional Processes in Submarine Canyons and Distribution of Gas Chimneys on Gas Hydrate Accumulation in the Shenhu Sea Area, Northern South China Sea
by
Yang, Chengzhi
,
Zhang, Cheng
,
Xiang, Changlong
in
accumulation
,
depositional process
,
Environmental aspects
2023
Previous gas hydrate production tests conducted by the Guangzhou Marine Geological Survey (GSGM) in 2017 and 2020 indicated the great potential of gas hydrates in the Shenhu Sea area in the Pearl River Mouth Basin (PRMB), China. In this study, the effects of deposition processes in submarine canyons and the distribution of gas chimneys on gas hydrate accumulation were investigated using high-resolution two- dimensional (2D) and three-dimensional (3D) seismic data. Four intact submarine canyons were identified in the study area. Five deepwater depositional elements are closely related to submarine canyons: lateral accretion packages (LAPs), basal lags, slides, mass transport deposits (MTDs), and turbidity lobes. MTDs and lobes with multiple stages outside the distal canyon mouth reveal that the sedimentary evolution of the canyon was accompanied by frequent sediment gravity flows. Gas chimneys originating from Eocene strata are generally up to 3 km wide and distributed in a lumpy or banded pattern. The analysis of seismic attributes confirmed fluid activity in these gas chimneys. Gas hydrates are mainly distributed in ridges among different canyons. Based on the gas sources of gas hydrates and depositional evolution of submarine canyons, depositional processes of sediment gravity flows in submarine canyons and the distribution of gas chimneys significantly affect the accumulation of gas hydrates. Based on these findings, this study establishes a conceptional model for the accumulation of gas hydrate, which can provide guidance in the prediction for favorable gas hydrates zones in the area and nearby.
Journal Article
Depositional process and its control on the densification of coal-measure tight sandstones: insights from the Permian Shanxi Formation of the northeastern Ordos Basin, China
2023
The densification of coal-measure sandstones is important to the exploration of tight sand gas. Previous studies have focused on the influence of diagenesis on sandstone densification, however neglecting the role of depositional processes. Based on an integrated analysis of logging, core, and rock and mineral data, this study depicted the lithological distribution and petrological characteristics of the coal-measure sandstones of the Shanxi Formation in the northeastern Ordos Basin, with revealing the influence of depositional process on diagenesis, and thus identified the densification of the sandstones. The results show that the sandstones were deposited in fluvial-delta settings and were isolated vertically and interbedded with the organic-rich carbonaceous mudstones and coal seams deposited in swamps. Depositional process exerts significant impact on the diagenesis of coal-measure sandstones by determining the sandstone composition. The sandstones are characterized by high argillaceous matrix content that sourced from both the weathered parent rock and the erosion of swamps. The well-sorted coarse and medium sandstones deposited in the middle of channels have relatively low argillaceous matrix contents due to high hydrodynamic energy, which preserved partial intergranular pores after compaction owing to grain supporting. The residual pores facilitated the acidic flow from organic matter in coal seams and mudstones, which led to dissolution and produced dissolved pores. However, the CO
2
generated by the thermal degradation of organic acids in carbonaceous mudstones and coal seams contributed to ferroan carbonate cementation, which led to sandstone densification. The poorly sorted fine sandstones deposited in channel margins or crevasse splays present high argillaceous matrix content due to low hydrodynamic energy. The mixed muddy and carbonaceous clasts due to the erosion of swamps by channels further increased the content of argillaceous matrix. High content of argillaceous matrix occupied most intergranular pores after strong compaction and restricted acidic fluid flow, therefore, dissolution and ferroan cementation were limited.
Journal Article