Explore the vast range of titles available.

Although, the basic concept of a fuel cell is quite simple, creating new designs and optimizing their performance takes serious work and a mastery of several technical areas. PEM Fuel Cell Modeling and Simulation Using Matlab, provides design engineers and researchers with a valuable tool for understanding and overcoming barriers to designing and building the next generation of PEM Fuel Cells. With this book, engineers can test components and verify designs in the development phase, saving both time and money. Easy to read and understand, this book provides design and modelling tips for fuel cell components such as: modelling proton exchange structure, catalyst layers, gas diffusion, fuel distribution structures, fuel cell stacks and fuel cell plant. This book includes design advice and MATLAB and FEMLAB codes for Fuel Cell types such as: polymer electrolyte, direct methanol and solid oxide fuel cells. This book also includes types for one, two and three dimensional modeling and two-phase flow phenomena and microfluidics.

Energy storage and conversion is a very important link between the steps of energy production and energy consumption. Traditional fossil fuels are a natural and unsustainable energy storage medium with limited reserves and notorious pollution problems, therefore demanding a better choice to store and utilize the green and renewable energies in the future. Energy and environmental problems require a clean and efficient way of using the fuels. Fuel cell functions to efficiently convert oxidant and chemical energy accumulated in the fuel directly into DC electric, with the by-products of heat and water. Fuel cells, which are known as effective electrochemical converters, and electricity generation technology has gained attention due to the need for clean energy, the limitation of fossil fuel resources and the capability of a fuel cell to generate electricity without involving any moving mechanical part. The fuel cell technologies that received high interest for commercialization are polymer electrolyte membrane fuel cells (PEMFCs), solid oxide fuel cells (SOFCs), and direct methanol fuel cells (DMFCs). The optimum efficiency for the fuel cell is not bound by the principle of Carnot cycle compared to other traditional power machines that are generally based on thermal cycles such as gas turbines, steam turbines and internal combustion engines. However, the fuel cell applications have been restrained by the high cost needed to commercialize them. Researchers currently focus on the discovery of different materials and manufacturing methods to enhance fuel cell performance and simplify components of fuel cells. Fuel cell systems’ designs are utilized to reduce the costs of the membrane and improve cell efficiency, durability and reliability, allowing them to compete with the traditional combustion engine. In this review, we primarily analyze recent developments in fuel cells technologies and up-to-date modeling for PEMFCs, SOFCs and DMFCs.

Hydrogen fuel cell vehicles can complement other electric vehicle technologies as a zero-emission technology and contribute to global efforts to achieve the emission reduction targets. This article spotlights the current deployment status of fuel cells in road transport. For this purpose, data collection was performed by the Advanced Fuel Cells Technology Collaboration Programme. Moreover, the available incentives for purchasing a fuel cell vehicle in different countries were reviewed and future perspectives summarized. Based on the collected information, the development trends in the last five years were analyzed and possible further trends that could see the realization of the defined goals derived. The number of registered vehicles was estimated to be 51,437 units, with South Korea leading the market, with 90% of the vehicles being concentrated in four countries. A total of 729 hydrogen refueling stations were in operation, with Japan having the highest number of these. The analysis results clearly indicate a very positive development trend for fuel cell vehicles and hydrogen refueling stations in 2021, with the highest number of new vehicles and stations in a single year, paralleling the year’s overall economic recovery. Yet, a more ambitious ramp-up in the coming years is required to achieve the set targets.

This review discusses the history, fundamentals, and applications of different fuel cell technologies, including proton exchange membrane fuel cells (PEMFCs), direct methanol fuel cells, solid oxide fuel cells (SOFCs), phosphoric acid fuel cells (PAFCs), alkaline fuel cells (AFCs), and molten carbonate fuel cells (MCFCs). Recent advances in fuel cell technologies have led to potential applications in aerospace, transportation, and portable and stationary power generation due to high efficiency and low emissions. Fuel cell types are also compared based on efficiency, operating temperature, lifetime, energy/power density, and cost. It was noticed that PEMFCs have the highest mass power density, reaching 1,000 W/kg compared to less than 100 W/kg for SOFCs, which makes them suitable for portable applications such as aircraft. PEMFCs and AFCs are suitable for low‐temperature applications and are highly efficient. SOFCs and MCFCs are better for high‐temperature operations. SOFCs are robust and suitable for high‐power demands, while MCFCs are advantageous for high‐power output. Hydrogen fuel cells promise to decarbonize transportation and aviation sectors with the advantages of lower weight, compactness, and quick startup times. However, challenges remain around renewable hydrogen production/infrastructure and aircraft integration, besides hydrogen storage, water management inside fuel cells, and operational robustness under varying pressures. Generally, for all fuel cell types, more focus should be given to enhancing the stability and efficiency of fuel cell materials and reducing their cost.

Due to the large quantities of carbon emissions generated by the transportation sector, cleaner automotive technologies are needed aiming at a green energy transition. In this scenario, hydrogen is pointed out as a promising fuel that can be employed as the fuel of either a fuel cell or an internal combustion engine vehicle. Therefore, in this work, we propose the design and modeling of a fuel cell versus an internal combustion engine passenger car for a driving cycle. The simulation was carried out using the quasistatic simulation toolbox tool in Simulink considering the main powertrain components for each vehicle. Furthermore, a brief analysis of the carbon emissions associated with the hydrogen production method is addressed to assess the clean potential of hydrogen-powered vehicles compared to conventional fossil fuel-fueled cars. The resulting analysis has shown that the hydrogen fuel cell vehicle is almost twice as efficient compared to internal combustion engines, resulting in a lower fuel consumption of 1.05 kg-H2/100 km in the WLTP driving cycle for the fuel cell vehicle, while the combustion vehicle consumed about 1.79 kg-H2/100 km. Regarding using different hydrogen colors to fuel the vehicle, hydrogen-powered vehicles fueled with blue and grey hydrogen presented higher carbon emissions compared to petrol-powered vehicles reaching up to 2–3 times higher in the case of grey hydrogen. Thus, green hydrogen is needed as fuel to keep carbon emissions lower than conventional petrol-powered vehicles.

The past 30 years have seen progress in the development of Pt-based nanocatalysts for the oxygen reduction reaction, and some are now in production on a commercial basis and used for polymer electrolyte fuel cells (PEFCs) for automotives and other applications. Further improvements in catalytic activity are required for wider uptake of PEFCs, however. In laboratories, researchers have developed various catalysts that have much higher activities than commercial ones, and these state-of-the-art catalysts have potential to improve energy conversion efficiencies and reduce the usage of platinum in PEFCs. There are several technical issues that must be solved before they can be applied in fuel cell vehicles, which require a high power density and practical durability, as well as high efficiency. In this Review, the development history of Pt-based nanocatalysts and recent analytical studies are summarized to identify the origin of these technical issues. Promising strategies for overcoming those issues are also discussed. This Review summarizes the development history of Pt-based nanocatalysts and recent analytical studies to identify the technical issues in the automobile application, proposing promising strategies for overcoming the trade-offs among the efficiency,power density, and durability of polymer electrolyte fuel cells.

This paper presents an overview of the status and future prospects of fuel-cell electric vehicles (FC-EVs). As global concerns about emissions escalate, FC-EVs have emerged as a promising substitute for traditional internal combustion engine vehicles. This paper discusses the fundamentals of fuel-cell technology considering the major types of fuel cells that have been researched and delves into the most suitable fuel cells for FC-EV applications, including comparisons with mainstream vehicle technologies. The present state of FC-EVs, ongoing research, and the challenges and opportunities that need to be accounted for are discussed. Furthermore, the comparison between promising proton-exchange membrane fuel cell (PEMFC) and solid oxide fuel cell (SOFC) technologies used in EVs provides valuable insights into their respective strengths and challenges. By synthesizing these aspects, the paper aims to provide a comprehensive understanding and facilitate decision-making for future advancements in sustainable FC-EV transportation, thereby contributing to the realization of a cleaner, greener, and more environmentally friendly future.

Greenhouse gas emissions from the freight transportation sector are a significant contributor to climate change, pollution, and negative health impacts because of the common use of heavy-duty diesel vehicles (HDVs). Governments around the world are working to transition away from diesel HDVs and to electric HDVs, to reduce emissions. Battery electric HDVs and hydrogen fuel cell HDVs are two available alternatives to diesel engines. Each diesel engine HDV, battery-electric HDV, and hydrogen fuel cell HDV powertrain has its own advantages and disadvantages. This work provides a comprehensive review to examine the working mechanism, performance metrics, and recent developments of the aforementioned HDV powertrain technologies. A detailed comparison between the three powertrain technologies, highlighting the advantages and disadvantages of each, is also presented, along with future perspectives of the HDV sector. Overall, diesel engine in HDVs will remain an important technology in the short-term future due to the existing infrastructure and lower costs, despite their high emissions, while battery-electric HDV technology and hydrogen fuel cell HDV technology will be slowly developed to eliminate their barriers, including costs, infrastructure, and performance limitations, to penetrate the HDV market.

Last years, the fuel cell has become well-known as an efficient and clean energy converter being a potential alternative to internal combustion engines. However, despite being very promising, the durability of those systems is still a bottleneck. Most of the time, a fuel cell is integrated in a hybrid system which considers the fuel cell stack, the battery, and the balance of plant. To keep improving the durability of such a system, diagnostic and prognostic tools are of particular importance and to implement such tools, modeling the system is a mandatory step. The purpose of this paper is to propose a critical review of the existing methods to model all elements of a hybrid fuel cell system according to operating conditions and degradation. In this review, interactions and major degradation mechanisms occurring at all components will be presented and the physicsbased models, data-driven and hybrid models of these components reviewed. Finally, methods will be discussed, and advantages and drawbacks will be summarized.

Effective thermal management is crucial for optimizing the performance, efficiency, and durability of fuel-cell technologies, including proton-exchange membrane fuel cells (PEMFCs) and solid-oxide fuel cells (SOFCs). The operation of fuel cells involves complex heat generation mechanisms, primarily driven by electrochemical reactions, which can lead to significant energy loss as heat. This review examines the specific heat generation sources and challenges associated with different fuel-cell types, highlighting the critical importance of effective thermal management strategies. Key techniques for thermal regulation, including active and passive cooling systems, are examined in detail. Active cooling methods like liquid cooling and air cooling are effective in dissipating excess heat, while passive methods leverage advanced materials and optimized designs to enhance natural heat dissipation. Furthermore, innovative heat recovery systems are explored, demonstrating their potential to enhance overall energy efficiency by capturing and repurposing waste heat. The integration of machine learning techniques has arisen as a promising avenue for advancing temperature control in fuel cells. Reinforcement learning, deep learning algorithms, and support vector machines, along with artificial neural networks, are discussed in the context of their application in managing temperature dynamics and optimizing thermal performance. The review also emphasizes the significance of real-time monitoring, as well as adaptive control strategies to respond effectively to the dynamic operating conditions of fuel cells. Understanding and applying these thermal management strategies is essential for the successful commercialization of fuel cells across various sectors, ranging from automotive to stationary power generation. With the growing demand for clean energy solutions, progress in thermal management techniques will be crucial in improving the dependability and practicality of fuel-cell systems.