Explore the vast range of titles available.

The orthodontic landscape is currently witnessing a significant technological evolution with the emergence of direct 3D-printed aligners (DPAs), which promise to close the digital workflow loop by eliminating the geometric limitations and solid model waste inherent to traditional thermoformed clear aligners (TCAs). This review provides a comprehensive analysis of the material science governing this transition from inert thermoplastic sheets to reactive photocurable resins. We explore the fundamental chemistry of DPA materials, and the pivotal role of post-processing in ensuring mechanical integrity and biocompatibility. Beyond passive mechanics, this review highlights preclinical research in functional material engineering, detailing how experimental DPAs are being investigated for the integration of antibacterial agents, remineralization fillers, and drug delivery systems. Furthermore, we evaluate the limited but emerging clinical data on DPAs, contrasting their shape-memory properties and force delivery profiles with conventional appliances, while critically addressing emerging safety concerns regarding monomer elution and microplastic generation. We conclude that while DPA technology offers superior dimensional control, comprehensive life cycle assessments and long-term in vivo trials are essential to fully substantiate their clinical efficacy, overall sustainability, and potential as advanced orthodontic appliances.

HighlightsThe study reveals the great potential of metal–organic framework (MOF)-based nanocomposites in thermal insulation and fire retardancy applications.A nanoengineering approach was developed to process MOFs into freestanding, mechanically strong, and elastic aerogels, which may boost the fundamental research and practical applications of MOFs in these areas.

Axonal junction defects and an inhibitory environment after spinal cord injury seriously hinder the regeneration of damaged tissues and neuronal functions. At the site of spinal cord injury, regenerative biomaterials can fill cavities, deliver curative drugs, and provide adsorption sites for transplanted or host cells. Some regenerative biomaterials can also inhibit apoptosis, inflammation and glial scar formation, or further promote neurogenesis, axonal growth and angiogenesis. This review summarized a variety of biomaterial scaffolds made of natural, synthetic, and combined materials applied to spinal cord injury repair. Although these biomaterial scaffolds have shown a certain therapeutic effect in spinal cord injury repair, there are still many problems to be resolved, such as product standards and material safety and effectiveness.

Emerging organic contaminants (EOCs), such as pharmaceutical compounds, are of growing environmental concern, and there is a need to develop new materials and technologies for their efficient removal. Here we developed a highly porous and stable zirconium–ellagate framework, denoted SU-102, which was used to remove EOCs from water, including real municipal wastewater treatment plant effluent. SU-102 adsorbs cationic EOCs with particularly high efficiencies, and of the 17 pharmaceutical EOCs detected in wastewater treatment plant effluent, all 9 cationic species were removed with efficiencies of at least 79.0–99.6%, emphasizing the importance of framework charge on selectivity. As a second mechanism of EOC removal, SU-102 photodegraded the antibiotic sulphamethazine under visible light. SU-102 is synthesized from ellagic acid, an edible polyphenol building unit, highlighting the possibility of creating stable high-performance multi-functional materials from sustainably sourced plant-based components.

Polyethylene terephthalate is one of the most abundantly used polymers, but also a significant pollutant in oceans. Due to growing environmental concerns, polyethylene terephthalate alternatives are highly sought after. Here we present readily recyclable polyethylene terephthalate analogues, made entirely from woody biomass. Central to the concept is a two-step noble metal free catalytic sequence (Cu20-PMO catalyzed reductive catalytic fractionation and Raney Ni mediated catalytic funneling) that allows for obtaining a single aliphatic diol 4-(3-hydroxypropyl) cyclohexan-1-ol in high isolated yield (11.7 wt% on lignin basis), as well as other product streams that are converted to fuels, achieving a total carbon yield of 29.5%. The diol 4-(3-hydroxypropyl) cyclohexan-1-ol is co-polymerized with methyl esters of terephthalic acid and furan dicarboxylic acid, both of which can be derived from the cellulose residues, to obtain polyesters with competitive Mw and thermal properties (T g of 70–90 °C). The polymers show excellent chemical recyclability in methanol and are thus promising candidates for the circular economy. ‘Polyethylene terephthalate is a widely used polymer with a concerning environmental impact, and alternatives are now highly sought. In this article, the authors present a biorefinery strategy for constructing polyester analogues of polyethylene terephthalate from woody biomass, which are promising candidates for the circular economy.

Three-dimensional (3D) cultures, so-called organoids, have emerged as an attractive tool for disease modeling and therapeutic innovations. Here, we aim to determine if boundary cap neural crest stem cells (BC) can survive and differentiate in gelatin-based 3D bioprinted bioink scaffolds in order to establish an enabling technology for the fabrication of spinal cord organoids on a chip. BC previously demonstrated the ability to support survival and differentiation of co-implanted or co-cultured cells and supported motor neuron survival in excitotoxically challenged spinal cord slice cultures. We tested different combinations of bioink and cross-linked material, analyzed the survival of BC on the surface and inside the scaffolds, and then tested if human iPSC-derived neural cells (motor neuron precursors and astrocytes) can be printed with the same protocol, which was developed for BC. We showed that this protocol is applicable for human cells. Neural differentiation was more prominent in the peripheral compared to central parts of the printed construct, presumably because of easier access to differentiation-promoting factors in the medium. These findings show that the gelatin-based and enzymatically cross-linked hydrogel is a suitable bioink for building a multicellular, bioprinted spinal cord organoid, but that further measures are still required to achieve uniform neural differentiation.

The increasing antibiotic resistance among uropathogenic bacteria warrants alternative therapeutic strategies. We demonstrate the potential of the synthetic peptide CD4-PP, designed by dimerization and backbone cyclization of the shortest antimicrobial region of human cathelicidin, LL-37. CD4-PP is active against clinical and type strains of common uropathogens Escherichia coli , Klebsiella pneumoniae , and Pseudomonas aeruginosa at concentrations substantially below cellular cytotoxic levels and induced membrane deformation and leakage in E. coli and P. aeruginosa . Furthermore, CD4-PP treatment prevented the formation of new biofilm and dissolved mature biofilm created by E. coli and P. aeruginosa and targeted curli amyloid in E. coli biofilms . In addition, CD4-PP also induced production of LL-37 by uroepithelial cells and increased the expression of tight junction proteins claudin-14 and occludin. During uroepithelial cell infection, CD4-PP significantly reduced uropathogen survival when treatment was given at the start of infection. Low micromolar of CD4-PP treatment initiated after 2 h was successful with all tested species, except P. aeruginosa where CD4-PP was unable to reduce survival, which could be attributed by early biofilm formation. Finally, we demonstrated that urinary catheter pieces coated with saline fluid supplemented with CD4-PP reduced the attachment of E. coli , giving it a potential clinical application.

Utilizing solar energy for sorbent regeneration during the CO 2 swing adsorption process could potentially reduce CO 2 capture costs. This study describes a new technique—solar thermal swing adsorption (STSA) for CO 2 capture based on application of intermittent illumination onto porous carbon monolith (PCM) sorbents during the CO 2 capture process. This allows CO 2 to be selectively adsorbed on the sorbents during the light-off periods and thereafter released during the light-on periods due to the solar thermal effect. The freestanding and mechanically strong PCMs have rich ultramicropores with narrow pore size distributions, displaying relatively high CO 2 adsorption capacity and high CO 2 /N 2 selectivity. Given the high CO 2 capture performance, high solar thermal conversion efficiency, and high thermal conductivity, the PCM sorbents could achieve high CO 2 capture rate of up to 0.226 kg CO 2 ⋅ kg carbon − 1 ⋅ h − 1 from a gas mixture of 20 vol.% CO 2 /80 vol.% N 2 under STSA conditions with a light intensity of 1000 W·m −2 . In addition, the combination of STSA with the conventional vacuum swing adsorption technique further increases the CO 2 working capacity.

The pore structure of the separator is crucial to the performance of a lithium-battery as it affects the cell resistance. Herein, a straightforward approach to vary the pore structure of Cladophora cellulose (CC) separators is presented. It is demonstrated that the pore size and porosity of the CC separator can be increased merely by decreasing the thickness of the CC separator by using less CC in the manufacturing of the separator. As the pore size and porosity of the CC separator are increased, the mass transport through the separator is increased which decreases the electrolyte resistance in the pores of the separator. This enhances the battery performance, particularly at higher cycling rates, as is demonstrated for LiFePO 4 /Li half-cells. A specific capacity of around 100 mAh g −1 was hence obtained at a cycling rate of 2 C with a 10 µm thick CC separator while specific capacities of 40 and close to 0 mAh g −1 were obtained for separators with thicknesses of 20 and 40 µm, respectively. As the results also showed that a higher ionic conductivity was obtained for the 10 µm thick CC separator than for the 20 and 40 µm thick CC separators, it is clear that the different pore structure of the separators was an important factor affecting the battery performance in addition to the separator thickness. The present straightforward, yet efficient, strategy for altering the pore structure hence holds significant promise for the manufacturing of separators with improved performance, as well as for fundamental studies of the influence of the properties of the separator on the performance of lithium-ion cells.

Background Nanocellulose, and particularly nanofibrillated cellulose (NFC), has been proposed for a diversity of applications in industry and in the biomedical field. Its unique physicochemical and structural features distinguish nanocellulose from traditional materials and enable its use as an advance nanomaterial. However, its nanoscale features may induce unknown biological responses. Limited studies with NFC are available and the biological impacts of its use have not been thoroughly explored. This study assesses the in vitro biological responses elicited by wood-derived NFC gels, when human dermal fibroblasts, lung MRC-5 cells and THP-1 macrophage cells are exposed to the nanomaterial. Furthermore, whether the presence of surface charged groups (i.e. carboxymethyl and hydroxypropyltrimethylammonium groups) on NFC can induce distinct biological responses is investigated. Results The introduction of surface charged groups resulted in individual nanofibrils, while fibril aggregates predominated in the unmodified NFC gel suspensions as observed by transmission electron microscopy. In the presence of proteins, the surface modified NFCs formed compact agglomerates while the agglomeration pattern of the unmodified NFC was similar in the presence of proteins and in physiological buffer. Unmodified and modified NFC gels did not induce cytotoxicity in human dermal fibroblasts, lung and macrophage cells. No significant ROS production by THP-1 macrophages was found and no cellular uptake was observed. However, an inflammatory response was detected when THP-1 macrophages were treated with unmodified NFC as assessed by an increase in TNF-α and IL1-β levels, an effect that was absent when surface charged groups were introduced into NFC. Conclusions Taken together, the data presented here show the absence of cytotoxic effects associated with the exposure to unmodified, carboxymethylated and hydroxypropyltrimethylammonium-modified NFCs. Unmodified NFC presented a pro-inflammatory effect which can be further moderated by introducing surface modifications such as carboxymethyl and hydroxypropyltrimethylammonium groups into the nanofibrils. The present findings suggest that the inflammatory response to NFC might be driven by the material surface chemistry, and thus open up for the possibility of designing safe nanocellulose materials.