Explore the vast range of titles available.

Carbon dots (CDs) are carbon-based nanomaterials with remarkable properties that can be produced from a wide variety of synthesis routes. Given that “standard” bottom-up procedures are typically associated with low synthesis yields, different authors have been trying to devise alternative high-yield fabrication strategies. However, there is a doubt if sustainability-wise, the latter should be really preferred to the former. Herein, we employed a Life Cycle Assessment (LCA) approach to compare and understand the environmental impacts of high-yield and “standard” bottom-up strategies, by applying different life cycle impact assessment (LCIA) methods. These routes were: (1) production of hydrochar, via the hydrothermal treatment of carbon precursors, and its alkaline peroxide treatment into high-yield CDs; (2) microwave treatment of carbon precursors doped with ethylenediamine; (3) and (6) thermal treatment of carbon precursor and urea; (4) hydrothermal treatment of carbon precursor and urea; (5) microwave treatment of carbon precursor and urea. For this LCA, four LCIA methods were used: ReCiPe, Greenhouse Gas Protocol, AWARE, and USEtox. Results identified CD-5 as the most sustainable synthesis in ReCiPe, Greenhouse Gas Protocol, and USEtox. On the other hand, in AWARE, the most sustainable synthesis was CD-1. It was possible to conclude that, in general, high-yield synthesis (CD-1) was not more sustainable than “standard” bottom-up synthesis, such as CD-5 and CD-6 (also with relatively high-yield). More importantly, high-yield synthesis (CD-1) did not generate much lower environmental impacts than “standard” approaches with low yields, which indicates that higher yields come with relevant environmental costs.

The liquid-assisted grinding (LAG) approach was exploited to efficiently produce a new salt cocrystal with a minimum expenditure of reagents and energy, with possible application in the pharmaceutical field. LAG was applied to the acridine/diclofenac couple, and a new cocrystal was obtained with a 1:1 ratio of reagents and its structure resolved by X-ray powder diffraction (XRPD). The XRPD analysis confirmed that the yield is higher than 90% and the limited use of solvents and the absence of waste generally makes the synthesis very efficient and with the minimum possible environmental impact. The crystal structure of the title compound was compared to a previously solved 1:2 cocrystal, also with the aid of Hirshfeld’s surface analysis and calculations of the energy framework. The packing of the 1:1 structure is stabilized by a strong H-bond and partial π⋯π-stacking interactions. It differs considerably from that of the previously identified cocrystal, in which two strong hydrogen bonds and a perfect interlocking of the molecules thanks to the the π⋯π stacking induce a much higher stability, as confirmed by energy framework calculations. DSC analysis confirmed its purity and a melting point at 140 °C, which is different from those of the two reactants.

This chapter contains sections titled: Preparation of 1,4,10,19,25,41,49,60,66,69‐C 70 (CF 3 ) 10 References

The effect of cold rolling on the microstructure and mechanical properties of an Al- and C-containing CoCrFeNiMn-type high-entropy alloy was reported. The alloy with a chemical composition (at %) of (20–23) Co, Cr, Fe, and Ni; 8.82 Mn; 3.37 Al; and 0.69 C was produced by self-propagating high-temperature synthesis with subsequent induction. In the initial as-cast condition the alloy had an face centered cubic single-phase coarse-grained structure. Microstructure evolution was mostly associated with either planar dislocation glide at relatively low deformation during rolling (up to 20%) or deformation twinning and shear banding at higher strain. After 80% reduction, a heavily deformed twinned/subgrained structure was observed. A comparison with the equiatomic CoCrFeNiMn alloy revealed higher dislocation density at all stages of cold rolling and later onset of deformation twinning that was attributed to a stacking fault energy increase in the program alloy; this assumption was confirmed by calculations. In the initial as-cast condition the alloy had low yield strength of 210 MPa with yet very high uniform elongation of 74%. After 80% rolling, yield strength approached 1310 MPa while uniform elongation decreased to 1.3%. Substructure strengthening was found to be dominated at low rolling reductions (<40%), while grain (twin) boundary strengthening prevailed at higher strains.

Summary Polyamines (PAs) are pleiotropic bioorganic molecules. Cellular PA contents are determined by a balance between PA synthesis and degradation. PAs have been extensively demonstrated to play vital roles in the modulation of plant developmental processes and adaptation to various environmental stresses. In this review, the latest advances on the diverse roles of PAs in a range of developmental processes, such as morphogenesis, organogenesis, growth and development, and fruit ripening, are summarized and discussed. Besides, the crosstalk between PAs and phytohormones or other signalling molecules, including H2O2 and NO, involved in these processes is dwelled on. In addition, the attempts made to improve the yield and quality of grain and vegetable crops through altering the PA catabolism are enumerated. Finally, several other vital questions that remain unanswered are proposed and discussed. These include the mechanisms underlying the cooperative regulation of developmental processes by PAs and their interplaying partners like phytohormones, H2O2 and NO; PA transport for maintaining homeostasis; and utilization of PA anabolism/catabolism for generating high‐yield and good‐quality crops. This review aims to gain new insights into the pleiotropic role of PAs in the modulation of plant growth and development, which provides an alternative approach for manipulating and engineering valuable crop varieties that can be used in the future.

For maize ( L.), early planting date could be of advantage to high yields but a review of planting date effect on high-yielding data is not yet available. Following this rationale, a synthesis-analysis was conducted from the farmer annual maize contest-winner data ( = 16171 data points; 2011-2016 period); cordially provided by the National Corn Growers Association and a scientific literature dataset collected from research publications since the last three decades. The main objectives of this study were to: (i) identify spatial yield variability within the high-yielding maize dataset; (ii) understand the impacts of planting date on yield variability; (iii) explore the effect of management practices on maize yield-planting date relationship, and (iv) utilize the yield-planting date dataset collected via farmer contest-winner as a benchmarking data to be compared to the compendium of scientific literature available for yield-planting date relationship for the primary US maize producing regions. Major findings of this study are: (i) significant correlation between planting date and latitude, (ii) maize yield was maximized when planting window was 89-106 day of the year (DOY) for the 30-35°N, 107-118 DOY for the 35-40°N, <119 DOY for 40-45°N, and <129 DOY for 45-50°N, and (iii) both, yield contest and literature datasets portrayed that planting date becomes a more relevant factor when planting late, presenting a relatively smaller planting window in high-compared to low-latitudes.

Undoubtedly, nanoparticles are one of the ideal choices for achieving challenges related to bio sensing, drug delivery, and biotechnological tools. After gaining success in biomedical research, scientists are exploring various types of nanoparticles for achieving sustainable agriculture. The active nanoparticles can be used as a direct source of micronutrients or as a delivery platform for delivering the bioactive agrochemicals to improve crop growth, crop yield, and crop quality. Till date, several reports have been published showing applications of nanotechnology in agriculture. For instance, several methods have been employed for application of nanoparticles; especially metal nanoparticles to improve agriculture. The physicochemical properties of nanoparticles such as core metal used to synthesize the nanoparticles, their size, shape, surface chemistry, and surface coatings affect crops, soil health, and crop-associated ecosystem. Therefore, selecting nanoparticles with appropriate physicochemical properties and applying them to agriculture via suitable method stands as smart option to achieve sustainable agriculture and improved plant performance. In presented review, we have compared various methods of nanoparticle application in plants and critically interpreted the significant differences to find out relatively safe and specific method for sustainable agricultural practice. Further, we have critically analyzed and discussed the different physicochemical properties of nanoparticles that have direct influence on plants in terms of nano safety and nanotoxicity. From literature review, we would like to point out that the implementation of smaller sized metal nanoparticles in low concentration via seed priming and foliar spray methods could be safer method for minimizing nanotoxicity, and for exhibiting better plant performance during stress and non-stressed conditions. Moreover, using nanomaterials for delivery of bioactive agrochemicals could pose as a smart alternative for conventional chemical fertilizers for achieving the safer and cleaner technology in sustainable agriculture. While reviewing all the available literature, we came across some serious drawbacks such as the lack of proper regulatory bodies to control the usage of nanomaterials and poor knowledge of the long-term impact on the ecosystem which need to be addressed in near future for comprehensive knowledge of applicability of green nanotechnology in agriculture.

Our society is pursuing chemically recyclable polymers to accelerate the green revolution in plastics. Here, we develop a recyclable polyester library from the alternating copolymerization of aldehyde and cyclic anhydride. Although these two monomer sets have little or no thermodynamic driving force for homopolymerization, their copolymerization demonstrates the unexpected alternating characteristics. In addition to readily available monomers, the method is performed under mild conditions, uses common Lewis/Brønsted acids as catalysts, achieves the facile tuning of polyester structure using two distinct monomer sets, and yields 60 polyesters. Interestingly, the copolymerization exhibits the chemical reversibility attributed to its relatively low enthalpy, which makes the resulting polyesters perform closed-loop recycling to monomers at high temperatures. This study provides a modular, efficient, and facile synthesis of recyclable polyesters using sustainable monomers. Alternating copolymerization of cyclic anhydrides and epoxides is an interesting platform for the synthesis of polyesters from renewable resources, but the near irreversibility of the copolymerization makes it challenging to develop chemically recyclable polyesters with easy-to-tune structure. Here, the authors develop a recyclable polyester library from alternating copolymerization of aldehyde and cyclic anhydride.

Summary Enhanced grain yield and quality traits are everlasting breeding goals. It is therefore of great significance to uncover more genetic resources associated with these two important agronomic traits. Plant MYB family transcription factors play important regulatory roles in diverse biological processes. However, studies on genetic functions of MYB in rice yield and quality are rarely to be reported. Here, we investigated a nucleus‐localized transcription factor OsMYB73 which is preferentially expressed in the early developing pericarp and endosperm. We generated targeted mutagenesis of OsMYB73 in rice, and the mutants had longer grains with obvious white‐belly chalky endosperm appearance phenotype. The mutants displayed various changes in starch physicochemical characteristics and lipid components. Transcriptome sequencing analysis showed that OsMYB73 was chiefly involved in cell wall development and starch metabolism. OsMYB73 mutation affects the expression of genes related to grain size, starch and lipid biosynthesis and auxin biosynthesis. Moreover, inactivation of OsMYB73 triggers broad changes in secondary metabolites. We speculate that rice OsMYB73 and OsNF‐YB1 play synergistic pivotal role in simultaneously as transcription activators to regulate grain filling and storage compounds accumulation to affect endosperm development and grain chalkiness through binding OsISA2, OsLTPL36 and OsYUC11. The study provides important germplasm resources and theoretical basis for genetic improvement of rice yield and quality. In addition, we enriches the potential biological functions of rice MYB family transcription factors.

Background Hericium erinaceus , a rare edible and medicine fungus, is widely used in the food and medical field. Polysaccharides from H. erinaceus are the main bioactive compound that exert high bioactive value in the medical and healthcare industries. Results The genome of H. erinaceus original strain HEA was reported 38.16 Mb, encoding 9780 predicted genes by single-molecule, real-time sequencing technology. The phylogenomic analysis showed that H. erinaceus had the closest evolutionary affinity with Dentipellis sp . The polysaccharide content in the fermented mycelia of mutated strains HEB and HEC, which obtained by ARTP mutagenesis in our previous study, was improved by 23.25 and 47.45%, and a new β-glucan fraction with molecular weight 1.056 × 10 6  Da was produced in HEC. Integrative analysis of transcriptome and proteomics showed the upregulation of the carbohydrate metabolism pathway modules in HEB and HEC might lead to the increased production of glucose-6P and promote the repeating units synthesis of polysaccharides. qPCR and PRM analysis confirmed that most of the co-enriched and differentially co-expressed genes involved in carbohydrate metabolism shared a similar expression trend with the transcriptome and proteome data in HEB and HEC. Heatmap analysis showed a noticeably decreased protein expression profile of the RAS-cAMP-PKA pathway in HEC with a highly increased 47.45% of polysaccharide content. The S phase progression blocking experiment further verified that the RAS-cAMP-PKA pathway’s dysfunction might promote high polysaccharide and β-glucan production in the mutant strain HEC. Conclusions The study revealed the primary mechanism of the increased polysaccharide synthesis induced by ARTP mutagenesis and explored the essential genes and pathways of polysaccharide synthesis.