Explore the vast range of titles available.

African pastoralists suffer recurrent droughts that cause high livestock mortality and vulnerability to climate change. The index-based livestock insurance (IBLI) program offers protection against drought impacts. However, the current IBLI design relying on the normalized difference vegetation index (NDVI) may pose limitation because it does not consider the mixed composition of rangelands (including herbaceous and woody plants) and the diverse feeding habits of grazers and browsers. To enhance IBLI, we assessed the efficacy of utilizing distinct browse and grazing forage estimates from woody LAI (LAI W ) and herbaceous LAI (LAI H ), respectively, derived from aggregate leaf area index (LAI A ), as an alternative to NDVI for refined IBLI design. Using historical livestock mortality data from northern Kenya as reference ground dataset, our analysis compared two competing models for (1) aggregate forage estimates including sub-models for NDVI, LAI (LAI A ); and (2) partitioned biomass model (LAI P ) comprising LAI H and LAI W . By integrating forage estimates with ancillary environmental variables, we found that LAI P , with separate forage estimates, outperformed the aggregate models. For total livestock mortality, LAI P yielded the lowest RMSE (5.9 TLUs) and higher R 2 (0.83), surpassing NDVI and LAI A models RMSE (9.3 TLUs) and R 2 (0.6). A similar pattern was observed for species-specific livestock mortality. The influence of environmental variables across the models varied, depending on level of mortality aggregation or separation. Overall, forage availability was consistently the most influential variable, with species-specific models showing the different forage preferences in various animal types. These results suggest that deriving distinct browse and grazing forage estimates from LAI P has the potential to reduce basis risk by enhancing IBLI index accuracy.

The relationship between two reflectances of different bands is often encountered in cross calibration and parameter retrievals from remotely-sensed data. The asymmetric-order vegetation isoline is one such relationship, derived previously, where truncation error was reduced from the first-order approximated isoline by including a second-order term. This study introduces a technique for optimizing the magnitude of the second-order term and further improving the isoline equation’s accuracy while maintaining the simplicity of the derived formulation. A single constant factor was introduced into the formulation to adjust the second-order term. This factor was optimized by simulating canopy radiative transfer. Numerical experiments revealed that the errors in the optimized asymmetric isoline were reduced in magnitude to nearly 1/25 of the errors obtained from the first-order vegetation isoline equation, and to nearly one-fifth of the error obtained from the non-optimized asymmetric isoline equation. The errors in the optimized asymmetric isoline were compared with the magnitudes of the signal-to-noise ratio (SNR) estimates reported for four specific sensors aboard four Earth observation satellites. These results indicated that the error in the asymmetric isoline could be reduced to the level of the SNR by adjusting a single factor.

$\\bullet$ Changes in leaf-area index (LAI) may alter ecosystem productivity in elevated $\\lbrack CO_{2}\\rbrack$ or $\\lbrack O_{3}\\rbrack$. By increasing the apparent quantum yield of photosynthesis ($\\phi_{c,max}$), elevated $\\lbrack CO_{2}\\rbrack$ may increase maximum LAI. However, $\\lbrack O_{3}\\rbrack$ when elevated independently accelerates senescence and may reduce LAI. $\\bullet$ Large plots (20 m diameter) of soybean (Glycine max) were exposed to ambient (approx. $370 \\mu mol mol^{-1}$) or elevated (approx. $550 \\mu mol mol^{-1}$) CO2 or 1.2 times ambient $\\lbrack O_{3}\\rbrack$ using soybean free-air concentration enrichment (SoyFACE). $\\bullet$ In 2001 elevated CO2 had no detectable effect on maximum LAI, but in 2002 maximum LAI increased by 10% relative to ambient air. Elevated $\\lbrack CO_{2}\\rbrack$ also increased the $\\phi_{c,max}$ of shade leaves in both years. Elevated $\\lbrack CO_{2}\\rbrack$ delayed LAI loss to senescence by approx. 54% and also increased leaf-area duration. Elevated $\\lbrack O_{3}\\rbrack$ accelerated senescence, reducing LAI by 40% near the end of the growing season. No effect of elevated $\\lbrack O_{3}\\rbrack$ on photosynthesis was detected. $\\bullet$ Elevated $\\lbrack CO_{2}\\rbrack$ or $\\lbrack O_{3}\\rbrack$ affected LAI primarily by altering the rate of senescence; knowledge of this may aid in optimizing future soybean productivity.

Leaf area index (LAI) is a fundamental indicator of plant growth status in agronomic and environmental studies. Due to rapid advances in unmanned aerial vehicle (UAV) and sensor technologies, UAV-based remote sensing is emerging as a promising solution for monitoring crop LAI with great flexibility and applicability. This study aimed to determine the feasibility of combining color and texture information derived from UAV-based digital images for estimating LAI of rice (Oryza sativa L.). Rice field trials were conducted at two sites using different nitrogen application rates, varieties, and transplanting methods during 2016 to 2017. Digital images were collected using a consumer-grade UAV after sampling at key growth stages of tillering, stem elongation, panicle initiation and booting. Vegetation color indices (CIs) and grey level co-occurrence matrix-based textures were extracted from mosaicked UAV ortho-images for each plot. As a solution of using indices composed by two different textures, normalized difference texture indices (NDTIs) were calculated by two randomly selected textures. The relationships between rice LAIs and each calculated index were then compared using simple linear regression. Multivariate regression models with different input sets were further used to test the potential of combining CIs with various textures for rice LAI estimation. The results revealed that the visible atmospherically resistant index (VARI) based on three visible bands and the NDTI based on the mean textures derived from the red and green bands were the best for LAI retrieval in the CI and NDTI groups, respectively. Independent accuracy assessment showed that random forest (RF) exhibited the best predictive performance when combining CI and texture inputs (R2 = 0.84, RMSE = 0.87, MAE = 0.69). This study introduces a promising solution of combining color indices and textures from UAV-based digital imagery for rice LAI estimation. Future studies are needed on finding the best operation mode, suitable ground resolution, and optimal predictive methods for practical applications.

Saturation effects limit the application of vegetation indices (VIs) in dense vegetation areas. The possibility to mitigate them by adopting a negative soil adjustment factor X is addressed. Two leaf area index (LAI) data sets are analyzed using the Google Earth Engine (GEE) for validation. The first one is derived from observations of MODerate resolution Imaging Spectroradiometer (MODIS) from 16 April 2013, to 21 October 2020, in the Apiacás area. Its corresponding VIs are calculated from a combination of Sentinel-2 and Landsat-8 surface reflectance products. The second one is a global LAI dataset with VIs calculated from Landsat-5 surface reflectance products. A linear regression model is applied to both datasets to evaluate four VIs that are commonly used to estimate LAI: normalized difference vegetation index (NDVI), soil adjusted vegetation index (SAVI), transformed SAVI (TSAVI), and enhanced vegetation index (EVI). The optimal soil adjustment factor of SAVI for LAI estimation is determined using an exhaustive search. The Dickey-Fuller test indicates that the time series of LAI data are stable with a confidence level of 99%. The linear regression results stress significant saturation effects in all VIs. Finally, the exhaustive searching results show that a negative soil adjustment factor of SAVI can mitigate the SAVIs’ saturation in the Apiacás area (i.e., X = −0.148 for mean LAI = 5.35), and more generally in areas with large LAI values (e.g., X = −0.183 for mean LAI = 6.72). Our study further confirms that the lower boundary of the soil adjustment factor can be negative and that using a negative soil adjustment factor improves the computation of time series of LAI.

Leaf area index (LAI) is an important vegetation parameter. Active light detection and ranging (LiDAR) technology has been widely used to estimate vegetation LAI. In this study, LiDAR technology, LAI retrieval and validation methods, and impact factors are reviewed. First, the paper introduces types of LiDAR systems and LiDAR data preprocessing methods. After introducing the application of different LiDAR systems, LAI retrieval methods are described. Subsequently, the review discusses various LiDAR LAI validation schemes and limitations in LiDAR LAI validation. Finally, factors affecting LAI estimation are analyzed. The review presents that LAI is mainly estimated from LiDAR data by means of the correlation with the gap fraction and contact frequency, and also from the regression of forest biophysical parameters derived from LiDAR. Terrestrial laser scanning (TLS) can be used to effectively estimate the LAI and vertical foliage profile (VFP) within plots, but this method is affected by clumping, occlusion, voxel size, and woody material. Airborne laser scanning (ALS) covers relatively large areas in a spatially contiguous manner. However, the capability of describing the within-canopy structure is limited, and the accuracy of LAI estimation with ALS is affected by the height threshold and sampling size, and types of return. Spaceborne laser scanning (SLS) provides the global LAI and VFP, and the accuracy of estimation is affected by the footprint size and topography. The use of LiDAR instruments for the retrieval of the LAI and VFP has increased; however, current LiDAR LAI validation studies are mostly performed at local scales. Future research should explore new methods to invert LAI and VFP from LiDAR and enhance the quantitative analysis and large-scale validation of the parameters.

Satellite-based leaf area index (LAI) products, such as the MODIS LAI, play an essential role in land surface and climate modeling research, from regional to global scales. However, data gaps and high-level noise can exist, thus limiting their applications to a broader scope. Our previous work has reprocessed the MODIS LAI Collection 5 (C5) product, and the reprocessed data have been widely used these years. In this study, the MODIS C6.1 LAI data were reprocessed to broaden its application as a successor. We updated the integrated two-step method that is used for MODIS C5 LAI and implemented it into the MODIS C6.1 LAI product. Comprehensive evaluations for the original and reprocessed products were conducted. The results showed that the reprocessed LAI data had better performance in validation against reference maps. In addition, the site scale time series of reprocessed data was much smoother and more consistent with adjacent values. The global scale comparison showed that, though the MODIS C6.1 LAI does have improvements in ground validation with LAI reference maps, its spatial continuity, temporal continuity, and consistency showed little improvement when compared to C5. In contrast, the reprocessed data were more spatiotemporally continuous and consistent. Based on this evaluation, some suggestions for using various MODIS LAI products were given. This study assessed the quality of these different versions of MODIS LAI products and demonstrated the improvement of the reprocessed C6.1 data, which we recommended for use as a substitute for the reprocessed C5 data in land surface and climate modeling.

Leaf area index (LAI) estimation is very important, and not only for canopy structure analysis and yield prediction. The unmanned aerial vehicle (UAV) serves as a promising solution for LAI estimation due to its great applicability and flexibility. At present, vegetation index (VI) is still the most widely used method in LAI estimation because of its fast speed and simple calculation. However, VI only reflects the spectral information and ignores the texture information of images, so it is difficult to adapt to the unique and complex morphological changes of rice in different growth stages. In this study we put forward a novel method by combining the texture information derived from the local binary pattern and variance features (LBP and VAR) with the spectral information based on VI to improve the estimation accuracy of rice LAI throughout the entire growing season. The multitemporal images of two study areas located in Hainan and Hubei were acquired by a 12-band camera, and the main typical bands for constituting VIs such as green, red, red edge, and near-infrared were selected to analyze their changes in spectrum and texture during the entire growing season. After the mathematical combination of plot-level spectrum and texture values, new indices were constructed to estimate rice LAI. Comparing the corresponding VI, the new indices were all less sensitive to the appearance of panicles and slightly weakened the saturation issue. The coefficient of determination (R2) can be improved for all tested VIs throughout the entire growing season. The results showed that the combination of spectral and texture features exhibited a better predictive ability than VI for estimating rice LAI. This method only utilized the texture and spectral information of the UAV image itself, which is fast, easy to operate, does not need manual intervention, and can be a low-cost method for monitoring crop growth.

Estimating the crop leaf area index (LAI) accurately is very critical in agricultural remote sensing, especially in monitoring crop growth and yield prediction. The development of unmanned aerial vehicles (UAVs) has been significant in recent years and has been extensively applied in agricultural remote sensing (RS). The vegetation index (VI), which reflects spectral information, is a commonly used RS method for estimating LAI. Texture features can reflect the differences in the canopy structure of rice at different growth stages. In this research, a method was developed to improve the accuracy of rice LAI estimation during the whole growing season by combining texture information based on wavelet transform and spectral information derived from the VI. During the whole growth period, we obtained UAV images of two study areas using a 12-band Mini-MCA system and performed corresponding ground measurements. Several VI values were calculated, and the texture analysis was carried out. New indices were constructed by mathematically combining the wavelet texture and spectral information. Compared with the corresponding VIs, the new indices reduced the saturation effect and were less sensitive to the emergence of panicles. The determination coefficient (R 2 ) increased for most VIs used in this study throughout the whole growth period. The results indicated that the estimation accuracy of LAI by combining spectral information and texture information was higher than that of VIs. The method proposed in this study used the spectral and wavelet texture features extracted from UAV images to establish a model of the whole growth period of rice, which was easy to operate and had great potential for large-scale auxiliary rice breeding and field management research.

The Leaf Area Index (LAI) is an ecophysiology key parameter characterising the canopy-atmosphere interface where most of the energy fluxes are exchanged. However, producing maps for managing the spatial and temporal variability of LAI in large croplands with traditional techniques is typically laborious and expensive. The objective of this paper is to evaluate the reliability of LAI estimation by processing dense 3D point clouds as a cost-effective alternative to traditional LAI assessments. This would allow for high resolution, extensive and fast mapping of the index, even in hilly and not easily accessible regions. In this setting, the 3D point clouds were generated from UAV-based multispectral imagery and processed by using an innovative methodology presented here. The LAI was estimated by a multivariate linear regression model using crop canopy descriptors derived from the 3D point cloud, which account for canopy thickness, height and leaf density distribution along the wall. For the validation of the estimated LAI, an experiment was conducted in a vineyard in Piedmont: the leaf area of 704 vines was manually measured by the inclined point quadrant approach and six UAV flights were contextually performed to acquire the aerial images. The vineyard LAI estimated by the proposed methodology showed to be correlated with the ones obtained by the traditional manual method. Indeed, the obtained R2 value of 0.82 can be considered fully adequate, compatible to the accuracy of the reference LAI manual measurement.