Explore the vast range of titles available.

Modifying lignin composition and structure is a key strategy to increase plant cell wall digestibility for biofuel production. Disruption of the genes encoding both cinnamyl alcohol dehydrogenases (CADs), including CADC and CADD, in Arabidopsis thaliana results in the atypical incorporation of hydroxycinnamaldehydes into lignin. Another strategy to change lignin composition is downregulation or overexpression of ferulate 5-hydroxylase (F5H), which results in lignins enriched in guaiacyl or syringyl units, respectively. Here, we combined these approaches to generate plants enriched in coniferaldehyde-derived lignin units or lignins derived primarily from sinapaldehyde. The cadc cadd and ferulic acid hydroxylase1 (fah1) cadc cadd plants are similar in growth to wild-type plants even though their lignin compositions are drastically altered. In contrast, disruption of CAD in the F5H-overexpressing background results in dwarfism. The dwarfed phenotype observed in these plants does not appear to be related to collapsed xylem, a hallmark of many other lignin-deficient dwarf mutants. cadc cadd, fah1 cadc cadd, and cadd F5H-overexpressing plants have increased enzyme-catalyzed cell wall digestibility. Given that these CAD-deficient plants have similar total lignin contents and only differ in the amounts of hydroxycinnamaldehyde monomer incorporation, these results suggest that hydroxycinnamaldehyde content is a more important determinant of digestibility than lignin content.

A reduction in the lignin content in transgenic plants induces the ectopic expression of defense genes, but the importance of altered lignin composition in such phenomena remains unclear. Two Arabidopsis lines with similar lignin contents, but strikingly different lignin compositions, exhibited different quantitative and qualitative transcriptional responses. Plants with lignin composed primarily of guaiacyl units overexpressed genes responsive to oomycete and bacterial pathogen attack, whereas plants with lignin composed primarily of syringyl units expressed a far greater number of defense genes, including some associated with cis-jasmone-mediated responses to aphids; these plants exhibited altered responsiveness to bacterial and aphid inoculation. Several of the defense genes were differentially induced by water-soluble extracts from cell walls of plants of the two lines. Glycome profiling, fractionation and enzymatic digestion studies indicated that the different lignin compositions led to differential extractability of a range of heterogeneous oligosaccharide epitopes, with elicitor activity originating from different cell wall polymers. Alteration of lignin composition affects interactions with plant cell wall matrix polysaccharides to alter the sequestration of multiple latent defense signal molecules with an impact on biotic stress responses.

Main conclusion CAD-deficient poplars enabled studying the influence of altered lignin composition on mechanical properties. Severe alterations in lignin composition did not influence the mechanical properties. Wood represents a hierarchical fiber-composite material with excellent mechanical properties. Despite its wide use and versatility, its mechanical behavior has not been entirely understood. It has especially been challenging to unravel the mechanical function of the cell wall matrix. Lignin engineering has been a useful tool to increase the knowledge on the mechanical function of lignin as it allows for modifications of lignin content and composition and the subsequent studying of the mechanical properties of these transgenics. Hereby, in most cases, both lignin composition and content are altered and the specific influence of lignin composition has hardly been revealed. Here, we have performed a comprehensive micromechanical, structural, and spectroscopic analysis on xylem strips of transgenic poplar plants, which are downregulated for cinnamyl alcohol dehydrogenase (CAD) by a hairpin-RNA-mediated silencing approach. All parameters were evaluated on the same samples. Raman microscopy revealed that the lignin of the hpCAD poplars was significantly enriched in aldehydes and reduced in the (relative) amount of G-units. FTIR spectra indicated pronounced changes in lignin composition, whereas lignin content was not significantly changed between WT and the hpCAD poplars. Microfibril angles were in the range of 18A degrees-24A degrees and were not significantly different between WT and transgenics. No significant changes were observed in mechanical properties, such as tensile stiffness, ultimate stress, and yield stress. The specific findings on hpCAD poplar allowed studying the specific influence of lignin composition on mechanics. It can be concluded that the changes in lignin composition in hpCAD poplars did not affect the micromechanical tensile properties.

Alfalfa ( Medicago sativa L.) forage quality is adversely affected by lignin deposition in cell walls at advanced maturity stages. Reducing lignin content through RNA interference or antisense approaches has been shown to improve alfalfa forage quality and digestibility. We employed a multiplex CRISPR/Cas9-mediated gene-editing system to reduce lignin content and alter lignin composition in alfalfa by targeting the COUMARATE 3-HYDROXYLASE (MsC3H) gene, which encodes a key enzyme in lignin biosynthesis. Four guide RNAs (gRNAs) targeting the first exon of MsC3H were designed and clustered into a tRNA-gRNA polycistronic system and introduced into tetraploid alfalfa via Agrobacterium -mediated transformation. Out of 130 transgenic lines, at least 73 lines were confirmed to contain gene-editing events in one or more alleles of MsC3H . Fifty-five lines were selected for lignin content/composition analysis. Amongst these lines, three independent tetra-allelic homozygous lines ( Msc3h-013, Msc3h-121 , and Msc3h-158 ) with different mutation events in MsC3H were characterized in detail. Homozygous mutation of MsC3H in these three lines significantly reduced the lignin content and altered lignin composition in stems. Moreover, these lines had significantly lower levels of acid detergent fiber and neutral detergent fiber as well as higher levels of total digestible nutrients, relative feed values, and in vitro true dry matter digestibility. Taken together, these results showed that CRISPR/Cas9-mediated editing of MsC3H successfully reduced shoot lignin content, improved digestibility, and nutritional values without sacrificing plant growth and biomass yield. These lines could be used in alfalfa breeding programs to generate elite transgene-free alfalfa cultivars with reduced lignin and improved forage quality.

The enzyme hydroxycinnamoyl-CoA:shikimate hydroxycinnamoyltransferase (HCT) is involved in the production of methoxylated monolignols that are precursors to guaiacyl and syringyl lignin in angiosperm species. We identified and cloned a putative HCT gene from Pinus radiata, a coniferous gymnosperm that does not produce syringyl lignin. This gene was up-regulated during tracheary element (TE) formation in P. radiata cell cultures and showed 72.6% identity to the amino acid sequence of the Nicotiana tabacum HCT isolated earlier. RNAi-mediated silencing of the putative HCT gene had a strong impact on lignin content, monolignol composition, and interunit linkage distribution. AcBr assays revealed an up to 42% reduction in lignin content in TEs. Pyrolysis-GC/MS, thioacidolysis, and NMR detected substantial changes in lignin composition. Most notable was the rise of p-hydroxyphenyl units released by thioacidolysis, which increased from trace amounts in WT controls to up to 31% in transgenics. Two-dimensional ¹³C-¹H correlative NMR confirmed the increase in p-hydroxyphenyl units in the transgenics and revealed structural differences, including an increase in resinols, a reduction in dibenzodioxocins, and the presence of glycerol end groups. The observed modifications in silenced transgenics validate the targeted gene as being associated with lignin biosynthesis in P. radiata and thus likely to encode HCT. This enzyme therefore represents the metabolic entry point leading to the biosynthesis of methoxylated phenylpropanoids in angiosperm species and coniferous gymnosperms such as P. radiata.

Palms can grow at sites exposed to high winds experiencing large dynamic wind and gust loads. Their stems represent a system of stiff fibrous elements embedded in the soft parenchymatous tissue. The proper design of the interface of the stiffening elements and the parenchyma is crucial for the functioning of the stem. The strategy of the palm to compromise between stiff fibre caps and the soft parenchymatous tissue may serve as a model system for avoiding stress discontinuities in inhomogeneous and anisotropic fibre-reinforced composite materials. We investigated the mechanical, structural and biochemical properties of the fibre caps of the palm Washingtonia robusta at different levels of hierarchy with high spatial resolution. A gradual decrease in stiffness across the fibre cap towards the surrounding parenchymatous tissue was observed. Structural adaptations at the tissue level were found in terms of changes in cell cross sections and cell wall thickness. At the cell wall level, gradients across the fibre cap were found in the degree of orientation of the microfibrils and in the lignin level and composition. The impact of these structural variations in the local material stiffness distribution is discussed.

Some agroforestry residues such as orange and olive tree pruning have been extensively evaluated for their valorization due to its high carbohydrates content. However, lignin-enriched residues generated during carbohydrates valorization are normally incinerated to produce energy. In order to find alternative high added-value applications for these lignins, a depth characterization of them is required. In this study, lignins isolated from the black liquors produced during soda/anthraquinone (soda/AQ) pulping of orange and olive tree pruning residues were analyzed by analytical standard methods and Fourier-transform infrared spectroscopy (FTIR), nuclear magnetic resonance (solid state 13C NMR and 2D NMR) and size exclusion chromatography (SEC). Thermal analysis (thermogravimetric analysis (TGA), differential scanning calorimetry (DSC)) and antioxidant capacity (Trolox equivalent antioxidant capacity) were also evaluated. Both lignins showed a high OH phenolic content as consequence of a wide breakdown of β-aryl ether linkages. This extensive degradation yielded lignins with low molecular weights and polydispersity values. Moreover, both lignins exhibited an enrichment of syringyl units together with different native as well as soda/AQ lignin derived units. Based on these chemical properties, orange and olive lignins showed relatively high thermal stability and good antioxidant activities. These results make them potential additives to enhance the thermo-oxidation stability of synthetic polymers.

The lignin structural ramifications of coumarate 3-hydroxylase (C3H) downregulation have not been addressed in hardwoods. Such information is required to accompany an assessment of the digestibility and bioenergy performance characteristics of poplar, in particular. Structurally rich 2D NMR methods were applied to the entire lignin fraction to delineate lignin p -hydroxyphenyl:guaiacyl:syringyl (H:G:S) levels and linkage distribution changes (and to compare with traditional degradative analyses). C3H downregulation reduced lignin levels by half and markedly increased the proportion of H units relative to the normally dominant G and S units. Relative stem H unit levels were up by ∼ 100-fold to ∼ 31 %, almost totally at the expense of G units; differences in the lignin interunit linkage distributions were more subtle. The H level in the most drastically C3H-downregulated transgenic poplar falls well beyond the H:G:S compositional bounds of normal angiosperms. The response observed here, in poplar, differs markedly from that reported for alfalfa where the S:G ratio remained almost constant even at substantial H levels, highlighting the often differing responses among plant species.

▪ Abstract  After a long period of little change, the basic concepts of lignin biosynthesis have been challenged by new results from genetic modification of lignin content and composition. New techniques for making directed genetic changes in plants, as well as improvements in the analytical techniques used to determine lignin content and composition in plant cell walls, have been used in experimental tests of the accepted lignin biosynthetic pathway. The lignins obtained from genetically modified plants have shown unexpected properties, and these findings have extended the known range of variation in lignin content and composition. These results argue that the accepted lignin biosynthetic pathway is either incomplete or incorrect, or both; and also suggest that plants may have a high level of metabolic plasticity in the formation of lignins. If this is so, the properties of novel lignins could be of significant scientific and practical interest.

An attractive objective in tree breeding is to reduce the content of lignin or alter its composition, in order to facilitate delignification in pulping. This has been achieved in transgenic angiosperm tree species. In this study we show for the first time that changes in lignin content and composition can be achieved in a conifer by taking a transgenic approach. Lignin content and composition have been altered in five-year-old transgenic plants of Norway spruce (Picea abies [L.] Karst) expressing the Norway spruce gene encoding cinnamoyl CoA reductase (CCR) in antisense orientation. The asCCR plants had a normal phenotype but smaller stem widths compared to the transformed control plants. The transcript abundance of the sense CCR gene was reduced up to 35% relative to the transformed control. The corresponding reduction in lignin content was up to 8%, which is at the lower limit of the 90-99% confidence intervals reported for natural variation. The contribution of H-lignin to the non-condensed fraction of lignin, as judged by thioacidolysis, was reduced up to 34%. The H-lignin content was strongly correlated with the total lignin content. Furthermore, the kappa number of small-scale Kraft pulps from one of the most down-regulated lines was reduced 3.5%. The transcript abundances of the various lignin biosynthetic genes were down-regulated indicating co-regulation of the biosynthetic pathway.