Explore the vast range of titles available.

Milk contains more than 400 different fatty acids, some of which play a positive role in promoting human health. The profile of fatty acids in milk can be enhanced by providing animals with plant-based resources that possess feeding characteristics adequate for favorable changes in the fatty acid composition and increasing healthy fatty acids in milk. This review summarizes the available 41 research studies on the utilization of oilseed industry byproducts rich in linoleic acid (hemp, pumpkin, sunflower) and alpha-linolenic acid (camelina and linseed) in dairy cow, sheep, and goat nutrition; their impact on milk production characteristics; and potential to improve fatty acid composition of milk through the diet. This review illustrates that incorporating byproducts into the diet for dairy ruminants generally does not have any adverse effects on both milk production and composition. A similar trend of improvement in milk fatty acid profile was observed when ruminants were fed diets supplemented with camelina, linseed, and sunflower byproducts, while no significant changes were noted with pumpkin byproducts. Hempseed byproducts showed potential for use as an alternative ingredient in dairy ruminant diets. Nevertheless, more in-depth research investigating the inclusion of selected byproducts is required before valid conclusions can be drawn regarding their value.

Pasta production is a good opportunity for product innovation in different forms. The aim of this work was to assess the use of flaxseed components for pasta production. We examined the chemical composition and cooking quality, at different contents of flaxseed flour (FF) and flaxseed cake (FC), added for pasta processing. The analysis showed that the addition of flaxseed components to the dough caused a substantial difference in the International Commission on Illumination color model (CIE) parameter, compared to control samples. The samples of pasta with FF and FC were darker, redder, and less yellow than the control. The minimum cooking time for the enriched pasta was longer than that for the control pasta, although cooking losses were lower. The increasing content of flaxseed components did not significantly change the weight and volume increase index. The enrichment of pasta with 23% FF and 17% FC yielded good quality pasta. The results of the chemical composition of the flaxseed-enriched pasta indicate considerably enhanced nutritional quality, particularly the levels of protein, fat, and dietary fiber of the pasta, without affecting its quality. Moreover, flaxseed cake can be an important source of nutritional ingredients for pasta production, although it is a by-product of the oil cold pressing technology.

Flaxseed is becoming increasingly popular as a superfood due to its many health benefits. While flaxseed is considered an oilseed, flaxseed meal (the by-product of flaxseed oil extraction) also contains many nutritional compounds not found in the oil. This study explored the use of a Canadian flaxseed (Linum usitatissimum L.) meal product to fortify bakery foods and improve their nutritional properties. Muffins were made using a control recipe as well as four different formulations that included varying amounts of a standardized flaxseed meal supplement called XanFlax (5, 10, 20, and 40%). The physicochemical properties of the muffins, including their texture, color, sugar content, pH, specific gravity, loss rate, and moisture, were evaluated. Additionally, the sensory attributes contributing to muffin quality were thoroughly examined. The lightness (L*) and yellowness (b*) of the muffins, which were highest in the control group at 82.22 and 34.69, respectively, decreased as the amount of XanFlax increased (p < 0.05). Additionally, the redness (a*) of the muffins increased as the amount of XanFlax increased (p < 0.05). The muffins’ sugar content (2.00 brix%) remained consistent across all treatments and controls except for those prepared with 20% XanFlax (2.17 brix%). As the amount of XanFlax powder increased, the pH of the muffins increased significantly. The moisture content in the muffins was highest at 23.71 ± 0.79% in the 10% XanFlax treatment and lowest at 22.06 ± 0.30% in the 40% XanFlax treatment. The muffins enriched with 5% XanFlax had an average height of 5.35 cm and volume of 131.33 mL, surpassing the results for the muffins made with other formulas (p < 0.05). Additionally, the cohesiveness and gumminess of the muffins tended to increase with the addition of XanFlax. The most favorable attributes, namely the appearance, flavor, taste, texture, and overall acceptance, were consistently associated with the 5% and 10% XanFlax treatments (p < 0.05). This study marks the first time a standardized flaxseed gum product, XanFlax, has been described in a functional baking application.

Background: The use of conventional astaxanthin extraction methods, typically involving organic solvents, leads to a heightened environmental impact. The aim of this study was to explore the potential use of environmentally friendly extraction solvents, such as vegetable oils, for recovering the shrimp by-product astaxanthin. Methods: Ultrasound-assisted extraction (UAE) in vegetable oils, including olive oil (OO), sunflower oil (SO), and flaxseed oil (FO), was employed to extract astaxanthin. The astaxanthin antioxidant activity was evaluated using an ABTS assay, and a mixture of gum Arabic and soy lecithin was used to form coacervates to produce astaxanthin encapsulation. Results: A by-product–vegetable oil ratio of 1:60, extraction time of 210 min, 60% amplitude of the extraction process, and the use of OO as the extracting medium resulted in an astaxanthin yield of 235 ± 4.07 μg astaxanthin/g by-products. The astaxanthin encapsulation efficiency on day 0 and astaxanthin recovery on day 1 were recorded at 66.6 ± 2.7% and 94.4 ± 4.6%, respectively. Conclusions: The utilization of OO as an extraction solvent for astaxanthin from shrimp by-products in UAE represents a novel and promising approach to reducing the environmental impact of shrimp by-products. The effective astaxanthin encapsulation efficiency highlights its potential application in food industries.

Nowadays, there is a global shortage in feed supply for animal nutrition; however, there are a considerable amount of agro-industrial co- and by-products that may offer a reasonable solution. Flaxseed cake (FSC) is a by-product of flaxseed for oil extraction rich in n-3 α-linolenic acid (ALA). Thus, the dietary inclusion of FSC on laying performance, egg quality, and serum and egg trace elements (Se, Zn, and Fe) was evaluated using Hisex White hens. The hens were distributed to three equal experimental treatments and provided diets including 0%, 5%, or 10% FSC from 48 to 58 weeks of age. Findings clarified that up to 10% FSC in the laying hen diet had no detrimental effect on laying rate, egg mass, and feed utilization. It was found that FSC resulted in a valuable source of protein, energy, macro- (Ca and P), micro- (Se, Zn and Fe) elements, and essential amino acids, with arginine being the highest. Dietary FSC did not negatively influence the egg quality traits, as well as egg sensory attributes. Including 5% or 10% FSC in diet did not significantly affect serum total protein and renal function in terms of creatinine, uric acid, and uric acid-to-creatinine ratio. Different FSC levels did not influence the chemical composition of eggs and trace elements in serum and eggs. It could be concluded that FSC is a valuable feedstuff that can provide a good source of energy, protein, amino acids, and macro- and micro-elements for hens’ nutrition. The inclusion of up to 10% of FSC in hens diet did not adversely influence egg laying performance, egg quality of both fresh and stored eggs, sensory attributes, and nutritional composition, as well as Se, Zn, and Fe in serum and eggs due to balanced nutrient profile of FSC.

Flaxseed meal (FSM) is a byproduct of flaxseed oil extraction which has rich nutritional value and can be used as a high-quality new protein ingredient. However, the anti-nutrient factor (ANF) in FSM restricts its potential application in feed. The strategy of microbial fermentation is a highly effective approach to reducing ANF in FSM and enhancing its feeding value. However, evaluation of the nutritional value of fermented flaxseed meal (FFSM) in growing pigs has not yet been conducted. Thus, the purpose of this study was to investigate the nutritional value of FFSM in growing pigs and comparison of the effect of fermentation treatment on improving the nutritional value of FSM. Two experiments were conducted to determine the available energy value, apparent digestibility of nutrients, and standard ileal digestibility of amino acids of FSM and FFSM in growing pigs. The results showed as follows: (1) Fermentation treatment increased the levels of crude protein (CP), Ca and P in FSM by 2.86%, 9.54% and 4.56%, while decreasing the concentration of neutral detergent fiber (NDF) and acid detergent fiber (ADF) by 34.09% and 12.71%, respectively (p < 0.05); The degradation rate of CGs in FSM was 54.09% (p < 0.05); (2) The digestible energy (DE) and metabolic energy (ME) of FSM and FFSM were 14.54 MJ/kg, 16.68 MJ/kg and 12.85 MJ/kg, 15.24 MJ/kg, respectively; (3) Compared with FSM, dietary FFSM supplementation significantly increased the apparent digestibility of CP, NDF, ADF, Ca, and P of growing pigs (p < 0.05) and significantly increased the standard ileal digestibility of methionine (p < 0.05). These results indicate that fermentation treatment could effectively enhance the nutritional value of FSM and provide basic theoretical data for the application of FFSM in pig production.

In this study various Aspergillus strains were explored for the production of protease using variety of agricultural byproducts as substrate. Aspergillus viridi was found to be the best among the selected strains with production of 83.0 U/mL of protease when grown on casein broth medium. Various agricultural byproducts were utilized for the growth of A. viridi and for the maximum protease production. Optimal production of enzyme 172.6 U/mL was recorded when PDB medium was supplemented with 3% banana peels powder as compared to 90.7, 84.7, 71.5, 68.7 and 47 U/mL when PDB medium was supplemented with pomegranate peels (3%), mustard oil cake (3%), arabic gum sawdust (2%), linseed oil cake (2%) and rosewood sawdust (3%) respectively. A. viridi could produce 172.6 U/mL when grown on 3% banana peels as sole substrate for growth. The protease production was increased with optimization of substrate water ratio (1:3), incubation time (72 h), inoculum size (2 mL), pH (8) and temperature (35 °C) from 172.6 to 178.1, 180.2, 182.9, 188.7 and 193.1 U/mL. Under optimal conditions, A. viridi produced 202.8 U/mL using agricultural byproducts as sole substrate. The strong potential of protease to remove hair from skin makes this enzyme a suitable candidate for its utilization in leather industry. Graphical Abstract

Natural Pickering emulsions are gaining popularity in several industrial fields, especially in the food industry and plant-based alternative sector. Therefore, the objective of this study was to characterize and compare six agri-food wastes/byproducts (lupin hull, canola press-cake, lupin byproduct, camelina press-cake, linseed hull, and linseed press-cake) as potential sources of food-grade Pickering stabilizers. The results showed that all samples contained surface-active agents such as proteins (46.71–17.90 g/100 g) and dietary fiber (67.10–38.58 g/100 g). Canola press-cake, camelina press-cake, and linseed hull exhibited the highest concentrations of polyphenols: 2891, 2549, and 1672 mg GAE/100 g sample, respectively. Moreover, the agri-food byproduct particles presented a partial wettability with a water contact angle (WCA) between 77.5 and 42.2 degrees, and they were effective for stabilizing oil-in-water (O/W) emulsions. The emulsions stabilized by Camelina press-cake, lupin hull, and lupin by-product (≥3.5%, w/w) were highly stable against creaming during 45 days of storage. Furthermore, polarized and confocal microscopy revealed that the particles were anchored to the interfaces of oil droplets, which is a demonstration of the formation of a Pickering emulsion stabilized by solid particles. These results suggest that agri-food wastes/byproducts are good emulsifiers that can be applied to produce stable Pickering emulsions.

This study involves the modeling of rheological behavior of the gum solution obtained from cold-pressed chia seed (CSG), flaxseed (FSG), and rocket seed (RSG) oil by-products and the application of these gums in a low-fat vegan mayonnaise formulation as fat replacers and emulsifier. CSG, FSG, and RSG solutions showed shear-thinning flow behavior at all concentrations. The K values ranged between 0.209 and 49.028 Pa·sn for CSG, FSG, and RSG solutions and significantly increased with increased gum concentration. The percentage recovery for the G′ was significantly affected by gum type and concentrations. CSG, FSG, and RSG showed a solid-like structure, and the storage modulus (G′) was higher than the loss modulus (G″) in all frequency ranges. The rheological characterization indicated that CSG, FSG, and RSG could be evaluated as thickeners and gelling agents in the food industry. In addition, the rheological properties, zeta potential, and particle size and oxidative stability (at 90 °C) of low-fat vegan mayonnaise samples prepared with CSG, FSG, and RSG were compared to samples prepared with guar gum (GG), Arabic gum (AG), and xanthan gum (XG). As a result, CSG, FSG, and RSG could be utilized for low-fat vegan mayonnaise as fat and egg replacers, stabilizers, and oxidative agents. The results of this study indicated that this study could offer a new perspective in adding value to flaxseed, chia seed, and rocket seed cold-press oil by-product.

Flaxseed meal (FSM) is a by-product of flaxseed product production that is wasted unreasonably at present. In this study, we used Bacillus subtilis K6, a dominant microbial strain, for solid-state fermentation (SSF) of FSM following preliminary screening to improve FSM utilization efficiency and enhance the soluble dietary fiber (SDF) content while modifying its functional properties. FSM’s microstructure was characterized before and after fermentation, and the functional properties of the dietary fiber (DF) in the FSM were assessed. Single-factor experiments combined with response surface methodology were conducted to optimize SSF parameters using SDF yield as the response variable. The optimal conditions were determined as follows: 45 h fermentation time, 40.5 °C temperature, and 1:0.65 material-to-liquid ratio. Under these conditions, the SDF yield reached 33.45 ± 0.24%, an SDF yield increase of 36.92%. Scanning electron microscopy and confocal laser scanning microscopy demonstrated FSM’s structural disruption during fermentation. Furthermore, SDF and insoluble DF showed improved water-holding, oil-holding, and swelling capacities following fermentation. These results indicate that SSF effectively enhances the SDF content in FSM and optimizes its functional properties, thereby providing a theoretical foundation for the valorization of flaxseed by-products.