Explore the vast range of titles available.

Weed management remains a critical challenge in the U.S. container ornamental production industry, where weeds not only compete with crops for limited resources but also harbor pests and pathogens, thereby diminishing plant quality and marketability. The paper explores the economic impact of weed infestations, herbicide resistance development, and the limited availability of selective herbicides for ornamental crops in the United States. This review synthesizes current chemical weed control tactics, focusing not only on both preemergence and postemergence herbicides commonly used in ornamental nurseries, but also organic alternatives and integrated weed management (IWM) approaches as complementary strategies by evaluating their effectiveness, crop safety, and usage. There is a critical need for research in the areas of alternative chemical options such as insecticides, miticides (e.g., Zerotol and Tetra Curb Max), and organic products for liverwort control in greenhouses. Although essential oils and plant-based extracts show some potential, their effectiveness and practical use remain largely unexplored.

Substrate stratification is a method of filling nursery containers with “layers” of different substrates, or different textures of the same substrate. Recently, it has been proposed as a means to improve drainage, substrate moisture dynamics, and optimize nutrient use efficiency. Substrates layered with larger particle bark as the top portion and smaller particle bark as the bottom portion of the container profile would theoretically result in a substrate that dries quickly on the surface, thereby reducing weed germination, but that would also retain adequate moisture for crop growth. The objective of this study was to evaluate the effect of stratified substrates on the growth of common nursery weeds and ornamental crops. This study evaluated the use of coarser bark (<0.5 or 0.75 inches) as the top substrate and finer bark (<0.38 inches) as the bottom substrate with the goal of reducing the water-holding capacity in the top 2 to 3 inches of the substrate to reduce weed germination and growth. Results showed that substrate stratification with more coarse bark on the top decreased the growth of bittercress ( Cardamine flexuosa ) by 80% to 97%, whereas liverwort ( Marchantia polymorpha ) coverage was reduced by 95% to 99%. Substrate stratification initially reduced the growth of ligustrum ( Ligustrum japonicum ) and blue plumbago ( Plumbago auriculata ), but there was no difference in the shoot or root dry weights of either species in comparison with those of nonstratified industry standard substrates at the end of 24 weeks. The data suggest substrate stratification could be used as an effective weed management strategy for container nursery production.

Biosorbent composites like chitin, alginate, moss, xanthene, and cotton can be derived from biotic species such as plants, algae, fungi, and bacteria which can be used for the exclusion of both organic and inorganic toxicants from sewage, industrial effluent, polluted soils, and many more. The use of composites in place of raw substrates like alginate and chitin increases the adsorption capacity as CS 4 CPL 1 beads increase the adsorption capacity for copper and nickel from 66.7 mg/g and 15.3 mg/g in the case of alginate microsphere to 719.38 mg/g and 466.07 mg/g respectively. Biosorbent fabricated from algae Chlorella vulgaris having surface area of 12.1 m 2 /g and pore size of 13.7 nm owing to which it displayed a higher adsorption capacity for Pb 0.433 mmol/g indicating their potential as an efficient biosorbent material. This article contains detailed information related to heavy metals as well as biosorbent that includes different isotherms, kinetics, techniques to estimate heavy metal concentration, removal methods, and adverse health effects caused due to heavy metal pollution. Apart from the above recovery and reuse of biosorbent, correlation with the sustainable development goals has also been included. Graphical Abstract

• The plant hormone auxin is a key factor for regulation of plant development, and this function was probably reinforced during the evolution of early land plants. We have extended the available toolbox to allow detailed studies of how auxin biosynthesis and responses are regulated in moss reproductive organs, their stem cells and gametes to better elucidate the function of auxin in the morphogenesis of early land plants. • We measured auxin metabolites and identified IPyA (indole-3-pyruvic acid) as the main biosynthesis pathway in Physcomitrium (Physcomitrella) patens and established knock-out, overexpressor and reporter lines for biosynthesis genes which were analyzed alongside previously reported auxin-sensing and transport reporters. • Vegetative and reproductive apical stem cells synthesize auxin. Sustained stem cell activity depends on an inability to sense the auxin produced while progeny of the stem cells respond to the auxin, aiding in the control of cell division, expansion and differentiation. Gamete precursors are dependent on a certain degree of auxin sensing, while the final differentiation is a low auxin-sensing process. • Tha data presented indicate that low auxin activity may represent a conserved hallmark of land plant gametes, and that local auxin biosynthesis in apical stem cells may be part of an ancestral mechanism to control focal growth.

The objective of this study was to determine how topdressing or incorporating fertilizer with stratified or mulched substrates could affect the growth of Hibiscus rosa-sinensis ‘Snow Queen’, a popular ornamental plant, and the growth of liverwort (Marchantia polymorpha) and bittercress (Cardamine flexuosa), two common nursery weed species. Five different substrate treatments were evaluated, which included three stratified substrates composed of pine bark screened to a small (0.63–1.27 cm), medium (≤1.90 cm), and large (0.96–1.90 cm) particle size and two industry-standard substrates that were either mulched with rice hulls or remained unmulched. All treatments were then fertilized via either topdressing or incorporating a controlled-release fertilizer (CRF). Bittercress control was highest in mulched containers, followed by those stratified using the medium pine bark, and its growth increased overall in topdressed vs. incorporated containers regardless of substrate or mulch treatment. All the stratification treatments resulted in a decrease in liverwort coverage compared to the industry standard treatment, but topdressing generally increased liverwort coverage compared with incorporating fertilizer. In conclusion, both topdressing and incorporation appear to be compatible with fertilizer placement methods with substrate stratification from a crop production standpoint; however, weed growth may increase if fertilizer is topdressed.

Aims The artificial cultivation of biocrusts may represent a new low-cost and highly efficient solution to erosion control. However, establishment under varying field environmental conditions is understudied. We tested a variety of methods, arriving at a set of technical recommendations for rapid establishment of moss biocrusts on disturbed slopes, and the industrialization of this process. Methods In multiple field experiments, aimed at moss biocrust cultivation and establishment, we considered the following factors: nutrient solutions (control and weekly addition); water-retaining agent (control and addition); plant growth regulator (control and biweekly addition); shading (0, 50%, 70% and 90%); dispersal method (broadcast and spray application). In all cases, we initially inoculated soils with 700 g/m2 of moss biocrust materials. We monitored dynamic changes of the coverage and density of moss biocrusts during the cultivation period, and their biomass at the end. Results We successfully cultured moss biocrusts in a field setting in as little as two months. Specifically, we found:(1) Regardless of the dispersal method, the nutrient solutions and some degree of shading both increased the coverage, plant density and biomass of moss biocrusts, whereas the water-retaining agent and plant growth regulator had little influence on these parameters. The shading treatments improved the survival rates of moss biocrusts, with the shade rating of 70% exhibiting the best performance. Further, the nutrient solutions had a more positive effect under shaded conditions. (2) The growth of mosses dispersed in the fall exceeded that of mosses dispersed in the summer. (3) Under both dispersal techniques, the maximal coverage of the moss biocrusts exceeded 90%, and the maximal plant density of moss biocrusts reached 120 stems/cm2 under broadcast dispersal, and 150 stems/cm2, under spray dispersal. Conclusions The rapid restoration of moss biocrusts can best be achieved by spray-dispersal or broadcast-dispersal, while also applying Hoagland solution to supply nutrients and maintaining soil moisture at 15–25%. Fall inoculation appears more likely to lead to better moss establishment, in fact, high moss mortality occurred in summer unless shading was used. We have some evidence, observational in fall, and experimental in summer, that moderate shading favors establishment. This technique could feasibly be up scaled and adopted to restore some ecological functions on various types of engineered disturbed surfaces. Over a longer period, the survivorship, succession and sustainability of artificial moss biocrusts should be explored specifically.

Mosses were proved as an ideal and reliable biomonitor as well as an indicator of atmospheric trace metal pollution. They are used as model indicator species of air pollution since long back due to their simple structure, genetic diversity, totipotency, rapid colony-forming ability, and high metal resistance behavior. Bryomonitoring technique is gradually being popularized as an economically viable procedure for estimating the degrees of environmental health and evaluating the toxic pollutants in biosphere. Thus, in the present scenario, many parts of the world use these organisms for monitoring the air pollution. This article describes an overview of the relationship of terrestrial mosses with trace metals with respect to their uptake, accumulation, and toxification as well as detoxification and tolerance mechanisms. The review article explicitly expresses the caliber of the cryptogamic mosses in establishing the pristine environment around the world. It also highlights the underpinning mechanisms and potential for future research directions. We have referred more than 250 articles, which deals with the assessment and impact of different heavy metals on 52 numbers of different moss species belongs to different climatic zones. The present review covers the research work in this area carried out worldwide since 1965.

The continuous discharge of diverse chemical products in the environment is nowadays of great concern to the whole world as some of them persist in the environment leading to serious diseases. Several sampling techniques have been used for the characterization of this chemical pollution, although biomonitoring using natural samplers has recently become the technique of choice in this field due to its efficiency, specificity, and low cost. In fact, several living organisms known as biomonitors could accumulate the well-known persistent environmental pollutants allowing their monitoring in the environment. In this work, a review on environmental biomonitoring is presented. The main sampling techniques used for monitoring environmental pollutants are first reported, followed by an overview on well-known natural species used as passive samplers and known as biomonitors. These species include conifer needles, lichen, mosses, bees and their byproducts, and snails, and were widely used in recent research as reliable monitors for environmental pollution.

Moss spores are present in aerobiological samples, but their low representation, lack of known allergenic properties, and difficult identification have led to their being overlooked by aerobiologists so far. The data about their presence in the atmosphere and the factors that influence them are, however, important from the biodiversity conservation point of view, since they give us information about their ability to spread to new habitats. In this pilot study, we analysed their presence in the atmosphere of Bratislava city, Slovakia (2018–2023), using Burkard volumetric sampler, and determined the most significant factors influencing its temporal distribution. The size category of 13–18 µm was the most represented in the samples. Environmental factors influenced the daily spore concentrations and the characteristics of the whole spore season. The start of the Main Spore Season (MSS) depended mainly on the temperatures in November–January, initiating earlier growth of sporophytes in the following year, while the intensity of the MSS was influenced by high humidity in April, stimulating the formation of spores in sporangia. The daily concentration of airborne moss spores was mostly influenced by the actual temperature and wind speed, promoting the release and dispersal of spores, and precipitation lowering their levels due to the “wash-out” effect, although no intradiurnal pattern was observed. More data from other locations is needed to determine the role of atmospheric spore transport for the conservation of moss species facing anthropogenic climatic change.

Heavy metals (HMs) being the notorious and toxic are being introduced into the environment credited to natural and anthropogenic activities. The use of ornamental plants is being ignored as potential candidates for HMs phytoremediation. In this study, pot experiments were conducted on Catharanthus roseus (L.) G.Don to evaluate selected heavy metals tolerance and accumulation potential with reference to the bacterial endophyte ( Bacillus cereus ) and organic amendments (moss and compost at 5% v / v). Results indicated improvement in uptake of Cd (230 mg kg −1 ), Cu (229 mg kg −1 ), and Cr (458 mg kg −1 ) by C. roseus with B. cereus . The concentration of Ni and Pb was found highest in controls (without strain) that were 420 and 904 mg kg −1 , respectively. Conversely, the addition of organic amendments enhanced biomass production, as compared to controls, 441, 471, and 763% by peat moss (T3), compost (T4), and peat moss + compost + inoculum treatments (T6), respectively, while reduction of plant HMs content was observed. Microbial-aided phytoremediation/phytoextraction could be a potential method for removal of Cd, Cr, and Cu, while organic amendments can significantly improve plant growth in the presence of heavy metals.