Explore the vast range of titles available.

Membrane fouling is one of the main drawbacks encountered during the practical application of membrane separation processes. Cleaning of a membrane is important to reduce fouling and improve membrane performance. Accordingly, an effective cleaning method is currently of crucial importance for membrane separation processes in water treatment. To clean the fouling and improve the overall efficiency of membranes, deep research on the cleaning procedures is needed. So far, physical, chemical, or combination techniques have been used for membrane cleaning. In the current work, we critically reviewed the fouling mechanisms affecting factors of fouling such as the size of particle or solute; membrane microstructure; the interactions between membrane, solute, and solvent; and porosity of the membrane and also examined cleaning methods of microfiltration (MF) membranes such as physical cleaning and chemical cleaning. Herein, we mainly focused on the chemical cleaning process. Factors affecting the chemical cleaning performance, including cleaning time, the concentration of chemical cleaning, and temperature of the cleaning process, were discussed in detail. This review is carried out to enable a better understanding of the membrane cleaning process for an effective membrane separation process.

The world’s water supplies have been contaminated due to large effluents containing toxic pollutants such as dyes, heavy metals, surfactants, personal care products, pesticides, and pharmaceuticals from agricultural, industrial, and municipal resources into water streams. Water contamination and its treatment have emerged out as an escalating challenge globally. Extraordinary efforts have been made to overcome the challenges of wastewater treatment in recent years. Various techniques such as chemical methods like Fenton oxidation and electrochemical oxidation, physical procedures like adsorption and membrane filtration, and several biological techniques have been recognized for the treatment of wastewater. This review communicates insights into recent research developments in different treatment techniques and their applications to eradicate various water contaminants. Research gaps have also been identified regarding multiple strategies for understanding key aspects that are important to pilot-scale or large-scale systems. Based on this review, it can be determined that adsorption is a simple, sustainable, cost-effective, and environmental-friendly technique for wastewater treatment, among all other existing technologies. However, there is a need for further research and development, optimization, and practical implementation of the integrated process for a wide range of applications. Graphical abstract

Manipulating the surface energy, and thereby the wetting properties of solids, has promise for various physical, chemical, biological and industrial processes. Typically, this is achieved by either chemical modification or by controlling the hierarchical structures of surfaces. Here we report a phenomenon whereby the wetting properties of vermiculite laminates are controlled by the hydrated cations on the surface and in the interlamellar space. We find that vermiculite laminates can be tuned from superhydrophilic to hydrophobic simply by exchanging the cations; hydrophilicity decreases with increasing cation hydration free energy, except for lithium. The lithium-exchanged vermiculite laminate is found to provide a superhydrophilic surface due to its anomalous hydrated structure at the vermiculite surface. Building on these findings, we demonstrate the potential application of superhydrophilic lithium exchanged vermiculite as a thin coating layer on microfiltration membranes to resist fouling, and thus, we address a major challenge for oil–water separation technology. Manipulation of surface energy and wetting properties of solids may impact a variety of processes, including membrane fouling. Here the authors tune properties of vermiculite laminates from superhydrophilic to hydrophobic by cation exchange, and demonstrate potential for fouling resistant oil–water separation.

Photocatalysis is an ecofriendly technique that emerged as a promising alternative for the degradation of many organic pollutants. The weaknesses of the present photocatalytic system which limit their industrial applications include low-usage of visible light, fast charge recombination, and low migration ability of the photo-generated electrons and holes. Therefore, various elements such as noble metals and transition metals as well as non-metals and metalloids (i.e., graphene, carbon nanotube, and carbon quantum dots) are doped into the photocatalyst as co-catalysts to enhance the photodegradation performance. The incorporation of the co-catalyst which alters the photocatalytic mechanism was discussed in detail. The application of photocatalysts in treating persistent organic pollutants such as pesticide, pharmaceutical compounds, oil and grease and textile in real wastewater was also discussed. Besides, a few photocatalytic reactors in pilot scale had been designed for the effort of commercializing the system. In addition, hybrid photocatalytic system integrating with membrane filtration together with their membrane fabrication methods had also been reviewed. This review outlined various types of heterogeneous photocatalysts, mechanism, synthesis methods of biomass supported photocatalyst, photocatalytic degradation of organic substances in real wastewater, and photocatalytic reactor designs and their operating parameters as well as the latest development of photocatalyst incorporated membrane.

Microplastics (MPs) cannot be completely removed from water/wastewater in conventional wastewater treatment plants (WWTPs) and drinking water treatment plants (DWTPs). According to the literature analysis, membrane technologies, one of the advanced treatment technologies, are the most effective and promising technologies for MP removal from water and wastewater. In this paper, firstly, the properties of MPs commonly present in WWTPs/DWTPs and the MP removal efficiency of WWTPs/DWTPs are briefly reviewed. In addition, research studies on MP removal from water/wastewater by microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), reverse osmosis (RO), and membrane bioreactors (MBRs) are reviewed. In the next section, membrane filtration is compared with other methods used for MP removal from water/wastewater, and the advantages/disadvantages of the removal methods are discussed. Moreover, the problem of membrane fouling with MPs during filtration and the potential for MP release from polymeric membrane structure to water/wastewater are discussed. Finally, based on the studies in the literature, the current status and research deficiencies of MP removal by membrane technologies are identified, and recommendations are made for further studies.

Chromium is a potentially toxic and carcinogenic metal originating from natural processes and anthropogenic activities such as the iron steel, electroplating and leather industries. Therefore, chromium should be removed from wastewater to avoid environmental pollution and to recycle chromium in the context of the future circular economy. Here we briefly review aqueous Cr species, their toxicity and methods to remove Cr such as membrane filtration, chemical precipitation, ion exchange, adsorption electrocoagulation, electrochemical reduction, electrodialysis, electrodeionization, photocatalysis and nanotechnology.

The world is on the cusp of a post-antibiotic era, but researchers and medical doctors have found a way forward—by looking back at how infections were treated before the advent of antibiotics, namely using phage therapy. Although bacteriophages (phages) continue to lack drug approval in Western medicine, an increasing number of patients are being treated on an expanded-access emergency investigational new drug basis. To streamline the production of high-quality and clinically safe phage preparations, we developed a systematic procedure for medicinal phage isolation, liter-scale cultivation, concentration and purification. The 16- to 21-day procedure described in this protocol uses a combination of modified classic techniques, modern membrane filtration processes and no organic solvents to yield on average 23 mL of 10 11 plaque-forming units (PFUs) per milliliter for Pseudomonas , Klebsiella , and Serratia phages tested. Thus, a single production run can produce up to 64,000 treatment doses at 10 9 PFUs, which would be sufficient for most expanded-access phage therapy cases and potentially for clinical phase I/II applications. The protocol focuses on removing endotoxins early by conducting multiple low-speed centrifugations, microfiltration, and cross-flow ultrafiltration, which reduced endotoxins by up to 10 6 -fold in phage preparations. Implementation of a standardized phage cultivation and purification across research laboratories participating in phage production for expanded-access phage therapy might be pivotal to reintroduce phage therapy to Western medicine. This protocol provides standardized laboratory manufacturing practices to select, cultivate and purify bacteriophages for human clinical applications. The procedure covers all stages from phage isolation and characterization to quality control.

In this research, the fate and removal of microplastics (MPs) entering and leaving a wastewater treatment plant (WWTP) was investigated. Additionally, application of the microfiltration membrane technique for MPs removal was evaluated. In the first phase, the quantity, type and size of the MPs were studied from three different points of the WWTP. The results showed that the average amount of MPs entering into the WWTP, accumulated in the sludge matrix and discharged from the effluent were 206, 183 and 94 MP/L, respectively. The MPs were observed mainly in the forms of fibers, pellets, and fragments, with a proportion of 35%, 39%, 22%, and 34%, 22%, 38%, and 31%, 39%, 37.7% in the influent, effluent and sludge of the WWTP, respectively. It should be noted, a minor amount of foam (2%) and film (0.3%) was also observed. The particle size distribution of the MPs in the effluent of the system was almost identical (6–14% for 1–5,000 μm), while the influent mostly contained particles within 1–100 μm (above 26%) with other particle sizes within 100–5,000 μm (8–17%). Particle size within a range of 500–5,000 μm was abundant in the sludge. In the second phase, a micro-filtration (MF) membrane with a pore size of 0.1 μm was applied to eliminate the MPs from the WWTP effluent. It was observed the application of the MF membrane technique could achieve MPs removal efficiency up to 98% in the effluent of the system.

Water pollution by recalcitrant compounds is an increasingly important problem due to the continuous introduction of new chemicals into the environment. Choosing appropriate measures and developing successful strategies for eliminating hazardous wastewater contaminants from industrial processes is currently a primary goal. Electroplating industry wastewater involves highly toxic cyanide (CN), heavy metal ions, oils and greases, organic solvents, and the complicated composition of effluents and may also contain biological oxygen demand (BOD), chemical oxygen demand (COD), SS, DS, TS, and turbidity. The availability of these metal ions in electroplating industry wastewater makes the water so toxic and corrosive. Because these heavy metals are harmful to living things, they must be removed to prevent them from being absorbed by plants, animals, and humans. As a result, exposure to electroplating wastewater can induce necrosis and nephritis in humans and lung cancer, digestive system cancer, anemia, hepatitis, and maxillary sinus cancer with prolonged exposure. For the safe discharge of electroplating industry effluents, appropriate wastewater treatment has to be provided. This article examines and assesses new approaches such as coagulation and flocculation, chemical precipitation, ion exchange, membrane filtration, adsorption, electrochemical treatment, and advanced oxidation process (AOP) for treating the electroplating industry wastewater. On the other hand, these physicochemical approaches have significant drawbacks, including a high initial investment and operating cost due to costly chemical reagents, the production of metal complexes sludge that needs additional treatment, and a long recovery process. At the same time, advanced techniques such as electrochemical treatment can remove various kinds of organic and inorganic contaminants such as BOD, COD, and heavy metals. The electrochemical treatment process has several advantages over traditional technologies, including complete removal of persistent organic pollutants, environmental friendliness, ease of integration with other conventional technologies, less sludge production, high separation, and shorter residence time. The effectiveness of the electrochemical treatment process depends on various parameters, including pH, electrode material, operation time, electrode gap, and current density. This review mainly emphasizes the removal of heavy metals and another pollutant such as CN from electroplating discharge. This paper will be helpful in the selection of efficient techniques for treatment based on the quantity and characteristics of the effluent produced.