Explore the vast range of titles available.

Biomass valorization to building block chemicals in food and pharmaceutical industries has tremendously gained attention. To produce monophenolic compounds from palm empty fruit bunch (EFB), EFB was subjected to alkaline hydrothermal extraction using NaOH or K2CO3 as a promotor. Subsequently, EFB-derived lignin was subjected to an oxidative depolymerization using Cu(II) and Fe(III) mixed metal oxides catalyst supported on γ-Al2O3 or SiO2 as the catalyst in the presence of hydrogen peroxide. The highest percentage of total phenolic compounds of 63.87 wt% was obtained from microwave-induced oxidative degradation of K2CO3 extracted lignin catalyzed by Cu-Fe/SiO2 catalyst. Main products from the aforementioned condition included 27.29 wt% of 2,4-di-tert-butylphenol, 19.21 wt% of syringol, 9.36 wt% of acetosyringone, 3.69 wt% of acetovanillone, 2.16 wt% of syringaldehyde, and 2.16 wt% of vanillin. Although the total phenolic compound from Cu-Fe/Al2O3 catalyst was lower (49.52 wt%) compared with that from Cu-Fe/SiO2 catalyst (63.87 wt%), Cu-Fe/Al2O3 catalyst provided the greater selectivity of main two value-added products, syringol and acetosyrigone, at 54.64% and 23.65%, respectively (78.29% total selectivity of two products) from the NaOH extracted lignin. The findings suggested a promising method for syringol and acetosyringone production from the oxidative heterogeneous lignin depolymerization under low power intensity microwave heating within a short reaction time of 30 min.

The effects of microwave assisted liquid hot water (MA-LHW) pretreatment on the chemical composition of Moso bamboo were investigated, and the fiber structure of pretreated residues were studied. The results showed that MA-LHW pretreatment had high selectivity for the degradation of hemicellulose in Moso bamboo, and the extracted hemicellulose could be used to prepare xylooligosaccharide through enzyme depolymerization. The degradation rates of cellulose and lignin after MA-LHW pretreatment were only 14.73% and 7.18%, which were significantly lower than those of LHW pretreatment; 155.0 mg/g xylobiose and 61.0 mg/g xylotrisoe can be obtained after enzymatic hydrolysis, and the yield of xylo-oligosaccharide reached 80.59% of the theoretical conversion rate. MA-LHW pretreatment increased the removal of hemicellulose, lignin, and other non-crystalline parts in bamboo materials, and more cellulose with crystalline structure was retained, which increased the CrI value of Moso bamboo by 14.84%. FTIR spectra showed that the characteristic peak intensity of hemicellulose was significantly reduced after MA-LHW pretreatment, which confirmed the selective degradation of hemicellulose by MA-LAW pretreatment. Moreover, MA-LHW pretreatment also destroyed O-H, C-H, C-O-C, and β-glucoside bonds in Moso bamboo fiber, caused by the recombination and synthesis of some groups (-CH 2 and C=O) of cellulose, hemicellulose, and lignin destroyed under pretreatment conditions.

Microwave pretreatment (MWP) has emerged as a promising strategy to enhance the pyrolysis of lignocellulosic biomass due to its rapid, volumetric, and selective heating. By disrupting the recalcitrant structure of cellulose, hemicellulose, and lignin, MWP improves biomass deconstruction, increases carbohydrate accessibility, and enhances yields of bio-oil, syngas, and biochar. When combined with complementary pretreatments—such as alkali, acid, hydrothermal, ultrasonic, or ionic-liquid methods—MWP further reduces activation energies, facilitating more efficient saccharification and thermal conversion. This review systematically evaluates scientific progress in this field through bibliometric analysis, mapping research trends, evolution, and collaborative networks. Key research questions are addressed regarding the technical advantages of MWP, the physicochemical transformations induced in biomass, and associated environmental benefits. Findings indicate that microwave irradiation promotes hemicellulose depolymerization, reduces cellulose crystallinity, and weakens lignin–carbohydrate linkages, which facilitates subsequent thermal decomposition and contributes to improved pyrolysis efficiency and product quality. From an environmental perspective, MWP contributes to energy savings, mitigates greenhouse gas emissions, and supports the integration of renewable electricity in biomass conversion.