Explore the vast range of titles available.

Legume plants produce one-third of the total yield of primary crops and are important food sources for both humans and animals worldwide. Frequent exposure to abiotic stresses, such as drought, salt, and cold, greatly limits the production of legume crops. Several morphological, physiological, and molecular studies have been conducted to characterize the response and adaptation mechanism to abiotic stresses. The tolerant mechanisms of the model legume plant Medicago truncatula to abiotic stresses have been extensively studied. Although many potential genes and integrated networks underlying the M. truncatula in responding to abiotic stresses have been identified and described, a comprehensive summary of the tolerant mechanism is lacking. In this review, we provide a comprehensive summary of the adaptive mechanism by which M. truncatula responds to drought, salt, and cold stress. We also discuss future research that need to be explored to improve the abiotic tolerance of legume plants.

The catalytic performances over propylene epoxidation with H 2 and O 2 (HOPO process) are significantly affected by the properties (e.g., surface properties, Ti coordination, and morphology) of titanosilicate zeolite. Introducing urea into zeolite synthesis is a simple and convenient method to modify these properties of titanosilicate zeolite. Uncalcined pore-blocked titanium silicalite-1 (TS-1, i.e., TS-1-B) with the lower urea dosage possesses more defective structure and unsaturated coordinated Ti sites verified by 29 Si nuclear magnetic resonance (NMR) and X-ray photoelectron spectroscopy (XPS) analysis, which results in a high initial activity and hydrogen efficiency; while the high surface acidity generated by these Ti species leads to a continuous decrease in the activity and the propylene oxide (PO) selectivity during the reaction. As the amount of urea gradually increases, the TS-1-B samples present the reduced surface defects and defective and unsaturated Ti species. Specially, TS-1-B-0.30U presents the weaker PO adsorption on PO-diffusion reflectance infrared Fourier transform spectra (DRIFTS), and thus results in the high stable PO formation rate and selectivity over its Au catalyst. Furthermore, a flat-plate-like shape with a shorter thickness of 100 nm along the b-axis direction is observed on the urea-modified TS-1. Compared with the conventional ellipsoidal TS-1 with crystal sizes of 200 and 500 nm, the flat-plate-like TS-1-0.30U displays the less surface defects, unsaturated Ti species, and the weaker Lewis acid, which is favorable for the desorption and intracrystalline diffusion of PO, thus reduces the occurrence of side reactions for the improved selectivity and stability. This work may provide a reference for developing titanium-containing materials with high activity and stability over HOPO reaction.

Background Polysaccharides are important active ingredients in Ophiocordyceps gracilis with many physiological functions. It can be obtained from the submerged fermentation by the anamorph ( Paraisaria dubia ) of Ophiocordyceps gracilis . However, it was found that the mycelial pellets of Paraisaria dubia were dense and increased in volume in the process of fermentation, and the center of the pellets was autolysis due to the lack of nutrient delivery, which extremely reduced the yield of polysaccharides. Therefore, it is necessary to excavate a fermentation strategy based on morphological regulation for Paraisaria dubia to promote polysaccharides accumulation. Results In this study, we developed a method for enhancing polysaccharides production by Paraisaria dubia using microparticle enhanced technology, talc microparticle as morphological inducer, and investigated the enhancement mechanisms by transcriptomics. The optimal size and dose of talc were found to be 2000 mesh and 15 g/L, which resulted in a high polysaccharides yield. It was found that the efficient synthesis of polysaccharides requires an appropriate mycelial morphology through morphological analysis of mycelial pellets. And, the polysaccharides synthesis was found to mainly rely on the ABC transporter-dependent pathway revealed by transcriptomics. This method was also showed excellent robustness in 5-L bioreactor, the maximum yields of intracellular polysaccharide and exopolysaccharides were 83.23 ± 1.4 and 518.50 ± 4.1 mg/L, respectively. And, the fermented polysaccharides were stable and showed excellent biological activity. Conclusions This study provides a feasible strategy for the efficient preparation of cordyceps polysaccharides via submerged fermentation with talc microparticles, which may also be applicable to similar macrofungi. Graphical Abstract

The roller-to-plate (R2P) hot-embossing process is an effective, low-cost method for producing high-quality micro-/nano-optical components. In the field of night vision applications, the fabrication of chalcogenide glass microstructures is emerging as a promising alternative to traditional infrared glass. This trend is driven by the potential of chalcogenide glass to surpass conventional materials in terms of performance. However, the development of R2P hot embossing faces challenges, such as the high cost of curved mold manufacturing, the reliance on roll-to-roll processes for nano hot embossing, the limitations of plastic materials, and the unclear viscoelastic properties of infrared glass. In this study, a novel R2P hot-embossing process was developed to fabricate flat chalcogenide glass structures. The key parameters, such as roller temperature, speed, and embossing pressure, were investigated to understand their impact on the glass-filling performance. The deformation mechanism of the glass microstructures was also analyzed. The experimental results show that the R2P hot-embossing method offers excellent reproducibility, achieving a maximum filling rate of 96% and an average roughness deviation of 8.36 nm. The increase in the roller temperature and embossing force increased the filling height of the glass microstructure arrays, while an increase in the roller speed decreased the filling height. Different embossing methods, including variations in speed, temperature, and force, are summarized to analyze the structural changes during embossing. This study provides a foundation and a basis for future research on the roller-to-plate hot embossing process.

As two coexisting abiotic stresses, salt stress and alkali stress have severely restricted the development of global agriculture. Clarifying the plant resistance mechanism and determining how to improve plant tolerance to salt stress and alkali stress have been popular research topics. At present, most related studies have focused mainly on salt stress, and salt-alkali mixed stress studies are relatively scarce. However, in nature, high concentrations of salt and high pH often occur simultaneously, and their synergistic effects can be more harmful to plant growth and development than the effects of either stress alone. Therefore, it is of great practical importance for the sustainable development of agriculture to study plant resistance mechanisms under saline-alkali mixed stress, screen new saline-alkali stress tolerance genes, and explore new plant salt-alkali tolerance strategies. Herein, we summarized how plants actively respond to saline-alkali stress through morphological adaptation, physiological adaptation and molecular regulation.

Flowering is a pivotal developmental transition in the life cycle of plants, and the precise timing of this process is crucial for successful reproduction. The flowering mechanism of the pineapple is influenced by a combination of genetic factors, environmental conditions and cultivation methods. Once pineapple plants have reached a certain number of leaves, the timing of floral bud differentiation can be regulated by applying plant growth regulators. This facilitates staggered fruit production and enables a balanced year-round supply. The timing, quantity and quality of floral bud differentiation directly affect pineapple fruit quality and yield, and also significantly impact the economic and social benefits of the pineapple industry. This paper provides a systematic review of the morphological characteristics of flowers, the patterns of floral bud differentiation, the mechanisms underlying natural and induced flowering, and the key factors influencing flowering in pineapples. This review establishes a theoretical foundation for regulating fruiting periods and optimising high-quality, high-efficiency cultivation practices.

Phenotypic convergence across distantly related taxa can be driven by similar selective pressures from the environment or intrinsic constraints. The roles of these processes on physiological strategies, such as homeothermy, are poorly understood. We studied the evolution of thermal properties of mammalian pelage in a diverse community of rodents inhabiting the Mojave Desert, USA. We used a heat flux device to measure the thermal insulation of museum specimens and determined whether thermal properties were associated with habitat preferences while assessing phylogenetic dependence. Species that prefer arid habitats exhibited lower conductivity and thinner pelage relative to species with other habitat preferences. Despite being thinner, the pelage of arid species exhibited comparable insulation to the pelage of the other species due to its lower conductivity. Thus, arid species have insulative pelage while simultaneously benefitting from thin pelage that promotes convective cooling. We found no evidence of intrinsic constraints or phylogenetic dependence, indicating pelage readily evolves to environmental pressures. Thermoregulatory simulations demonstrated that arid specialists reduced energetic costs required for homeothermy by 14.5% by evolving lower conductivity, providing support for adaptive evolution of pelage. Our study indicates that selection for lower energetic requirements of homeothermy has shaped evolution of pelage thermal properties.

One of the most chronic constraints to crop production is the grain yield reduction near the crop harvest stage by lodging worldwide. This is more prevalent in cereal crops, particularly in wheat and rice. Major factors associated with lodging involve morphological and anatomical traits along with the chemical composition of the stem. These traits have built up the remarkable relationship in wheat and rice genotypes either prone to lodging or displaying lodging resistance. In this review, we have made a comparison of our conceptual perceptions with foregoing published reports and proposed the fundamental controlling techniques that could be practiced to control the devastating effects of lodging stress. The management of lodging stress is, however, reliant on chemical, agronomical, and genetic factors that are reducing the risk of lodging threat in wheat and rice. But, still, there are many questions remain to be answered to elucidate the complex lodging phenomenon, so agronomists, breeders, physiologists, and molecular biologists require further investigation to address this challenging problem.

The current unpredictable climate changes are causing frequent and severe droughts. Such circumstances emphasize the need to understand the response of plants to drought stress, especially in rice, one of the most important grain crops. Knowledge of the drought stress response components is especially important in plant roots, the major organ for the absorption of water and nutrients from the soil. Thus, this article reviews the root response to drought stress in rice. It is presented to provide readers with information of use for their own research and breeding program for tolerance to drought stress in rice.

IntroductionTranscriptional analyses have identified several distinct molecular subtypes in pancreatic ductal adenocarcinoma (PDAC) that have prognostic and potential therapeutic significance. However, to date, an indepth, clinicomorphological correlation of these molecular subtypes has not been performed. We sought to identify specific morphological patterns to compare with known molecular subtypes, interrogate their biological significance, and furthermore reappraise the current grading system in PDAC.DesignWe first assessed 86 primary, chemotherapy-naive PDAC resection specimens with matched RNA-Seq data for specific, reproducible morphological patterns. Differential expression was applied to the gene expression data using the morphological features. We next compared the differentially expressed gene signatures with previously published molecular subtypes. Overall survival (OS) was correlated with the morphological and molecular subtypes.ResultsWe identified four morphological patterns that segregated into two components (‘gland forming’ and ‘non-gland forming’) based on the presence/absence of well-formed glands. A morphological cut-off (≥40% ‘non-gland forming’) was established using RNA-Seq data, which identified two groups (A and B) with gene signatures that correlated with known molecular subtypes. There was a significant difference in OS between the groups. The morphological groups remained significantly prognostic within cancers that were moderately differentiated and classified as ‘classical’ using RNA-Seq.ConclusionOur study has demonstrated that PDACs can be morphologically classified into distinct and biologically relevant categories which predict known molecular subtypes. These results provide the basis for an improved taxonomy of PDAC, which may lend itself to future treatment strategies and the development of deep learning models.