Explore the vast range of titles available.

As a diagnostic monitoring approach, electroencephalogram (EEG) signals can be decoded by signal processing methodologies for various health monitoring purposes. However, EEG recordings are contaminated by other interferences, particularly facial and ocular artifacts generated by the user. This is specifically an issue during continuous EEG recording sessions, and is therefore a key step in using EEG signals for either physiological monitoring and diagnosis or brain–computer interface to identify such artifacts from useful EEG components. In this study, we aim to design a new generic framework in order to process and characterize EEG recording as a multi-component and non-stationary signal with the aim of localizing and identifying its component (e.g., artifact). In the proposed method, we gather three complementary algorithms together to enhance the efficiency of the system. Algorithms include time–frequency (TF) analysis and representation, two-dimensional multi-resolution analysis (2D MRA), and feature extraction and classification. Then, a combination of spectro-temporal and geometric features are extracted by combining key instantaneous TF space descriptors, which enables the system to characterize the non-stationarities in the EEG dynamics. We fit a curvelet transform (as a MRA method) to 2D TF representation of EEG segments to decompose the given space to various levels of resolution. Such a decomposition efficiently improves the analysis of the TF spaces with different characteristics (e.g., resolution). Our experimental results demonstrate that the combination of expansion to TF space, analysis using MRA, and extracting a set of suitable features and applying a proper predictive model is effective in enhancing the EEG artifact identification performance. We also compare the performance of the designed system with another common EEG signal processing technique—namely, 1D wavelet transform. Our experimental results reveal that the proposed method outperforms 1D wavelet.

Partial discharge (PD) is not only an important symptom for monitoring the imperfections in the insulation system of a gas-insulated switchgear (GIS), but also the factor that accelerates the degradation. At present, monitoring ultra-high-frequency (UHF) signals induced by PDs is regarded as one of the most effective approaches for assessing the insulation severity and classifying the PDs. Therefore, in this paper, a deep learning-based PD classification algorithm is proposed and realized with a multi-column convolutional neural network (CNN) that incorporates UHF spectra of multiple resolutions. First, three subnetworks, as characterized by their specified designed temporal filters, frequency filters, and texture filters, are organized and then intergraded by a fully-connected neural network. Then, a long short-term memory (LSTM) network is utilized for fusing the embedded multi-sensor information. Furthermore, to alleviate the risk of overfitting, a transfer learning approach inspired by manifold learning is also present for model training. To demonstrate, 13 modes of defects considering both the defect types and their relative positions were well designed for a simulated GIS tank. A detailed analysis of the performance reveals the clear superiority of the proposed method, compared to18 typical baselines. Several advanced visualization techniques are also implemented to explore the possible qualitative interpretations of the learned features. Finally, a unified framework based on matrix projection is discussed to provide a possible explanation for the effectiveness of the architecture.

We performed a comparative study to select the efficient mother wavelet (MWT) basis functions that optimally represent the signal characteristics of the electrical activity of the human brain during a working memory (WM) task recorded through electro-encephalography (EEG). Nineteen EEG electrodes were placed on the scalp following the 10–20 system. These electrodes were then grouped into five recording regions corresponding to the scalp area of the cerebral cortex. Sixty-second WM task data were recorded from ten control subjects. Forty-five MWT basis functions from orthogonal families were investigated. These functions included Daubechies (db1–db20), Symlets (sym1–sym20), and Coiflets (coif1–coif5). Using ANOVA, we determined the MWT basis functions with the most significant differences in the ability of the five scalp regions to maximize their cross-correlation with the EEG signals. The best results were obtained using “sym9” across the five scalp regions. Therefore, the most compatible MWT with the EEG signals should be selected to achieve wavelet denoising, decomposition, reconstruction, and sub-band feature extraction. This study provides a reference of the selection of efficient MWT basis functions.

The aim of this work is to detect bone cancer using a new bone image processing technology technique in bone image processing to aid in rapid and early detection and treatment of bone cancer. The drawbacks of current methods for detecting bone cancer include slow speed and limited accuracy. This research addresses these drawbacks with a new image processing technique to speed up detection and increase accuracy by addressing noise in the input images and applying compression to reduce the space occupied by large datasets in the images, leading to improved image quality and faster diagnosis. The new technique, the clustered discrete wavelet Boubaker transform (CDBWT), has shown significant improvements, with accuracy increasing from 96.13% to 99.90%, average accuracy from 95.70% to 97.95%, and intersection-over-union (IoU) accuracy from 96.56% to 99.81%. The resulting image quality results, including peak signal-to-noise ratio (PSNR), mean square error (MSE), bits per pixel (BPP), and compression ratio (CR), are ideal. The accuracy achieved with the new technique after combining it with a k-means clustering process after preprocessing, which involves a multi-resolution analysis (MRA) process that transforms images into high and low frequencies, helped improve the image quality to be free of noise and compression, thus improving the accuracy of bone cancer identification in the input images. Due to the effectiveness of the new technique, high accuracy was achieved by obtaining image quality parameters such as PSNR, MSE, BPP, and CR obtained in the pre-processing with MRA phase. This was achieved by reducing noise and compression to provide clearer images, improving the detection process for bone cancer. The new technique was combined with k-means clustering, making it an effective technique for rapid and early detection of bone cancer

Fault detection and classification are crucial procedures for electric power distribution systems because they can minimize the occurrence of faults. The methods for fault detection and classification have become more problematic because of the significant expansion of distributed energy resources in distribution systems and the change in their currents due to the action of short-circuiting. In this context, to fill this gap, this study presents a robust methodology for short-circuit fault detection and classification with the insertion of distributed generation units. The proposal methodology progresses in two stages: in the former stage, the detection is based on the continuous analysis of three-phase currents, whose characteristics are extracted through maximal overlap discrete wavelet transform. In the latter stage, the classification is based on three fuzzy inference systems to identify the phases with disturbance. The short-circuit type is identified by counting the shorted phases. The algorithm for short-circuit fault detection and classification is developed in MATLAB programming environment. The methodology is implemented in a modified IEEE 34-bus test system and modeled in ATPDraw with three scenarios with and without distributed generation units and considering the following parameters: fault type (single-phase, two-phase, and three-phase), angle of incidence, fault resistance (high impedance fault and low impedance fault), fault location bus, and distributed generation units (synchronous generators and photovoltaic panels). The accuracy is greater than 94.9% for the detection and classification of short-circuit faults for more than 20,000 simulated cases.

Efficient detection and classification of power quality disturbances is required with the increasing penetration of multi-energy systems such as microgrids and features from renewable energy resources. Machine learning approach is popular to generate useful and optimal features from data learning to improve the classification performance. This paper aims to analyse the classification performance using the hybrid model of multi-resolution analysis and long short-term memory network. The proposed model uses four-level decomposition wavelet transform to increase the resolution of input signals into multi-bands signal representation. Spatial and temporal feature representation of the wavelet coefficients are highlighted using attention mechanism before feeding into long short-term memory network for sequence feature extraction. The sequence feature output is then passed into multiple dense layer for the classification process. Synthetic disturbance signals are used as training samples. The performance test carried out includes the condition of 20–50 dB signal-to-noise ratio signals, where additive white Gaussian noise are added into the test samples.

In this paper, a fiber Bragg grating (FBG)-based stress monitoring system instrumented on an orthotropic steel deck arch bridge is demonstrated. The FBG sensors are installed at two types of critical fatigue-prone welded joints to measure the strain and temperature signals. A total of 64 FBG sensors are deployed around the rib-to-deck and rib-to-diagram areas at the mid-span and quarter-span of the investigated orthotropic steel bridge. The local stress behaviors caused by the highway loading and temperature effect during the construction and operation periods are presented with the aid of a wavelet multi-resolution analysis approach. In addition, the multi-modal characteristic of the rainflow counted stress spectrum is modeled by the method of finite mixture distribution together with a genetic algorithm (GA)-based parameter estimation approach. The optimal probability distribution of the stress spectrum is determined by use of Bayesian information criterion (BIC). Furthermore, the hot spot stress of the welded joint is calculated by an extrapolation method recommended in the specification of International Institute of Welding (IIW). The stochastic characteristic of stress concentration factor (SCF) of the concerned welded joint is addressed. The proposed FBG-based stress monitoring system and probabilistic stress evaluation methods can provide an effective tool for structural monitoring and condition assessment of orthotropic steel bridges.

The significance of rigorous optimization techniques in antenna engineering has grown significantly in recent years. For many design tasks, parameter tuning must be conducted globally, presenting a challenge due to associated computational costs. The popular bio-inspired routines often necessitate thousands of merit function calls to converge, generating prohibitive expenses whenever the design process relies on electromagnetic (EM) simulation models. Surrogate-assisted methods offer acceleration, yet constructing reliable metamodels is hindered in higher-dimensional spaces and systems with highly nonlinear characteristics. This work suggests an innovative technique for global antenna optimization embedded within a machine-learning framework. It involves iteratively refined kriging surrogates and particle swarm optimization for generating infill points. The search process operates within a reduced-dimensionality region established through fast global sensitivity analysis. Domain confinement enables the creation of accurate behavioral models using limited training data, resulting in low CPU costs for optimization. Additional savings are realized by employing variable-resolution EM simulations, where low-fidelity models are utilized during the global search stage (including sensitivity analysis), and high-fidelity ones are reserved for final (gradient-based) tuning of antenna parameters. Comprehensive verification demonstrates the consistent performance of the proposed procedure, its superiority over benchmark techniques, and the relevance of the mechanisms embedded into the algorithm for enhancing search process reliability, design quality, and computational efficiency.

Images provided by the ESA Sentinel-2 mission are rapidly becoming the main source of information for the entire remote sensing community, thanks to their unprecedented combination of spatial, spectral and temporal resolution, as well as their associated open access policy. Due to a sensor design trade-off, images are acquired (and delivered) at different spatial resolutions (10, 20 and 60 m) according to specific sets of wavelengths, with only the four visible and near infrared bands provided at the highest resolution (10 m). Although this is not a limiting factor in general, many applications seem to emerge in which the resolution enhancement of 20 m bands may be beneficial, motivating the development of specific super-resolution methods. In this work, we propose to leverage Convolutional Neural Networks (CNNs) to provide a fast, upscalable method for the single-sensor fusion of Sentinel-2 (S2) data, whose aim is to provide a 10 m super-resolution of the original 20 m bands. Experimental results demonstrate that the proposed solution can achieve better performance with respect to most of the state-of-the-art methods, including other deep learning based ones with a considerable saving of computational burden.

The stability of power systems is very sensitive to voltage or current variations caused by the discontinuous supply of renewable power feeders. Moreover, the impact of these anomalies varies depending on the sensitivity/resilience of customer and transmission system equipment to those deviations. From any of these points of view, an instantaneous characterization of power quality (PQ) aspects becomes an important task. For this purpose, a wavelet-based power quality indices (PQIs) are introduced in this paper. An instantaneous disturbance index (ITD(t)) and a Global Disturbance Ratio index (GDR) are defined to integrally reflect the PQ level in Power Distribution Networks (PDN) under steady-state and/or transient conditions. With only these two indices it is possible to quantify the effects of non-stationary disturbances with high resolution and precision. These PQIs offer an advantage over other similar because of the suitable choice of mother wavelet function that permits to minimize leakage errors between wavelet levels. The wavelet-based algorithms which give rise to these PQIs can be implemented in smart sensors and used for monitoring purposes in PDN. The applicability of the proposed indices is validated by using a real-time experimental platform. In this emulated power system, signals are generated and real-time data are analyzed by a specifically designed software. The effectiveness of this method of detection and identification of disturbances has been proven by comparing the proposed PQIs with classical indices. The results confirm that the proposed method efficiently extracts the characteristics of each component from the multi-event test signals and thus clearly indicates the combined effect of these events through an accurate estimation of the PQIs.