Explore the vast range of titles available.

Rapidly developing remote sensing techniques are shedding new light on large-scale crop growth status monitoring, especially in recent applications of unmanned aerial vehicles (UAVs). Many inversion models have been built to estimate crop growth variables. However, the present methods focused on building models for each single crop stage, and the features generally used in the models are vegetation indices (VI) or joint VI with data derived from UAV-based sensors (e.g., texture, RGB color information, or canopy height). It is obvious these models are either limited to a single stage or have an unstable performance across stages. To address these issues, this study selected four key wheat growth parameters for inversion: above-ground biomass (AGB), plant nitrogen accumulation (PNA) and concentration (PNC), and the nitrogen nutrition index (NNI). Crop data and multispectral data were acquired in five wheat growth stages. Then, the band reflectance and VI were obtained from multispectral data, along with the five stages that were recorded as phenology indicators (PIs) according to the stage of Zadok’s scale. These three types of data formed six combinations (C1–C6): C1 used all of the band reflectances, C2 used all VIs, C3 used bands and VIs, C4 used bands and PIs, C5 used VIs and PIs, and C6 used bands, Vis, and PIs. Some of the combinations were integrated with PIs to verify if PIs can improve the model accuracy. Random forest (RF) was used to build models with combinations of different parameters and evaluate the feature importance. The results showed that all models of different combinations have good performance in the modeling of crop parameters, such as R2 from 0.6 to 0.79 and NRMSE from 10.51 to 15.83%. Then, the model was optimized to understand the importance of PIs. The results showed that the combinations that integrated PIs showed better estimations and the potential of using PIs to minimize features while still achieving good predictions. Finally, the varied model results were evaluated to analyze their performances in different stages or fertilizer treatments. The results showed the models have good performances at different stages or treatments (R2 > 0.6). This paper provides a reference for monitoring and estimating wheat growth parameters based on UAV multispectral imagery and phenology information.

Accurate and reliable bathymetric data are needed for a wide diversity of marine research and management applications. Satellite-derived bathymetry represents a time saving method to map large shallow waters of remote regions compared to the current costly in situ measurement techniques. This study aims to create very high-resolution (VHR) bathymetry and habitat mapping in Mayotte island waters (Indian Ocean) by fusing 0.5 m Pleiades-1 passive multispectral imagery and active ICESat-2 LiDAR bathymetry. ICESat-2 georeferenced photons were filtered to remove noise and corrected for water column refraction. The bathymetric point clouds were validated using the French naval hydrographic and oceanographic service Litto3D® dataset and then used to calibrate the multispectral image to produce a digital depth model (DDM). The latter enabled the creation of a digital albedo model used to classify benthic habitats. ICESat-2 provided bathymetry down to 15 m depth with a vertical accuracy of bathymetry estimates reaching 0.89 m. The benthic habitats map produced using the maximum likelihood supervised classification provided an overall accuracy of 96.62%. This study successfully produced a VHR DDM solely from satellite data. Digital models of higher accuracy were further discussed in the light of the recent and near-future launch of higher spectral and spatial resolution satellites.

The recent developments of new deep learning architectures create opportunities to accurately classify high-resolution unoccupied aerial system (UAS) images of natural coastal systems and mandate continuous evaluation of algorithm performance. We evaluated the performance of the U-Net and DeepLabv3 deep convolutional network architectures and two traditional machine learning techniques (support vector machine (SVM) and random forest (RF)) applied to seventeen coastal land cover types in west Florida using UAS multispectral aerial imagery and canopy height models (CHM). Twelve combinations of spectral bands and CHMs were used. Our results using the spectral bands showed that the U-Net (83.80–85.27% overall accuracy) and the DeepLabV3 (75.20–83.50% overall accuracy) deep learning techniques outperformed the SVM (60.50–71.10% overall accuracy) and the RF (57.40–71.0%) machine learning algorithms. The addition of the CHM to the spectral bands slightly increased the overall accuracy as a whole in the deep learning models, while the addition of a CHM notably improved the SVM and RF results. Similarly, using bands outside the three spectral bands, namely, near-infrared and red edge, increased the performance of the machine learning classifiers but had minimal impact on the deep learning classification results. The difference in the overall accuracies produced by using UAS-based lidar and SfM point clouds, as supplementary geometrical information, in the classification process was minimal across all classification techniques. Our results highlight the advantage of using deep learning networks to classify high-resolution UAS images in highly diverse coastal landscapes. We also found that low-cost, three-visible-band imagery produces results comparable to multispectral imagery that do not risk a significant reduction in classification accuracy when adopting deep learning models.

The traditional method for determining wine grape total soluble solid (TSS) is destructive laboratory analysis, which is time consuming and expensive. In this study, we explore the potential of using different predictor variables from various advanced techniques to predict the grape TSS in a non-destructive and rapid way. Calculating Pearson’s correlation coefficient between the vegetation indices (VIs) obtained from UAV multispectral imagery and grape TSS resulted in a strong correlation between OSAVI and grape TSS with a coefficient of 0.64. Additionally, seven machine learning models including ridge regression and lasso regression, k-Nearest neighbor (KNN), support vector regression (SVR), random forest regression (RFR), extreme gradient boosting (XGBoost), and artificial neural network (ANN) are used to build the prediction models. The predictor variables include the unmanned aerial vehicles (UAV) derived VIs, and other ancillary variables including normalized difference vegetation index (NDVI_proximal) and soil electrical conductivity (ECa) measured by proximal sensors, elevation, slope, trunk circumference, and day of the year for each sampling date. When using 23 VIs and other ancillary variables as input variables, the results show that ensemble learning models (RFR, and XGBoost) outperform other regression models when predicting grape TSS, with the average of root mean square error (RMSE) of 1.19 and 1.2 °Brix, and coefficient of determination (R2) of 0.52 and 0.52, respectively, during the 20 times testing process. In addition, this study examines the prediction performance of using optimized soil adjusted vegetation index (OSAVI) or normalized green-blue difference index (NGBDI) as the main input for different machine learning models with other ancillary variables. When using OSAVI-based models, the best prediction model is RFR with an average R2 of 0.51 and RMSE of 1.19 °Brix, respectively. For NGBDI-based model, the RFR model showed the best average result of predicting TSS were a R2 of 0.54 and a RMSE of 1.16 °Brix, respectively. The approach proposed in this study provides an opportunity to grape growers to estimate the whole vineyard grape TSS in a non-destructive way.

Techniques and Applications of Hyperspectral Image Analysis gives an introduction to the field of image analysis using hyperspectral techniques, and includes definitions and instrument descriptions.Other imaging topics that are covered are segmentation, regression and classification.

Approaches for remote sensing can be used to estimate the influence of changes in environmental conditions on terrestrial plants, providing timely protection of their growth, development, and productivity. Different optical methods, including the informative multispectral and hyperspectral imaging of reflected light, can be used for plant remote sensing; however, multispectral and hyperspectral cameras are technically complex and have a high cost. RGB imaging based on the analysis of color images of plants is definitely simpler and more accessible, but using this tool for remote sensing plant characteristics under changeable environmental conditions requires the development of methods to increase its informativity. Our review focused on using RGB imaging for remote sensing the characteristics of terrestrial plants. In this review, we considered different color models, methods of exclusion of background in color images of plant canopies, and various color indices and their relations to characteristics of plants, using regression models, texture analysis, and machine learning for the estimation of these characteristics based on color images, and some approaches to provide transformation of simple color images to hyperspectral and multispectral images. As a whole, our review shows that RGB imaging can be an effective tool for estimating plant characteristics; however, further development of methods to analyze color images of plants is necessary.

Spatial distribution prediction of growing stock volume (GSV) for supporting the sustainable management of forest ecosystems, is one of the most widespread applications of remote sensing. For this purpose, remote sensing data were used as predictor variables in combination with ground data obtained from field sample plots. However, with the increase in forest GSV values, the spectral reflectance of remote sensing imagery is often saturated or less sensitive to the GSV changes, making accurate estimation difficult. To improve this, we examined the GSV estimation performance and data saturation of four optical remote sensing image datasets (Landsat 8, Sentinel-2, ZiYuan-3, and GaoFen-2) in the subtropical region of Central South China. First, various feature variables were extracted and three optimization methods were used to select optimal feature variable combinations. Subsequently, k-nearest-neighbor (kNN), random forest regression, and categorical boosting algorithms were employed to build the GSV estimation models, and evaluate the GSV estimation accuracy and saturation. Second, Gram Schmidt (GS) and NNDiffuse pan sharpening (NND) methods were employed to fuse the optimal multispectral images and explore various image fusion schemes suitable for GSV estimation. We proposed an adaptive stacking (AdaStacking) model ensemble algorithm to further improve GSV estimation performance. The results indicated that Sentinel-2 had the highest GSV estimation accuracy exhibiting a minimum relative root mean square error of 20.06% and saturation of 434 m3/ha, followed by GaoFen-2 with a minimum relative root mean square error of 22.16% and a saturation of 409 m3/ha. Among the four fusion images, the NND-B2 image—obtained by fusing the GaoFen-2 green band and Sentinel-2 multispectral image with the NND method—had the best estimation accuracy. The estimated optimal RMSEs of NND-B2 were 24.4% and 16.5% lower than those of GaoFen-2 and Sentinel-2, respectively. Therefore, the fused image data based on GF-2 and Sentinel-2 can effectively couple the advantages of the two images and significantly improve the GSV estimation performance. Moreover, the proposed adaptive stacking model is more effective in GSV estimation than a single model. The GSV estimation saturation value of the AdaStacking model based on NND-B2 was 5.4% higher than that of the KNN-Maha model. The GSV distribution map estimated by AdaStacking model used the NND-B2 dataset corresponded accurately with the field observations. This study provides some insights into the optical image fusion scheme, feature selection, and adaptive modeling algorithm in GSV estimation for coniferous forest.

Hyperspectral imaging systems are starting to be used as a scientific tool for food quality assessment. A typical hyperspectral image is composed of a set of a relatively wide range of monochromatic images corresponding to continuous wavelengths that normally contain redundant information or may exhibit a high degree of correlation. In addition, computation of the classifiers used to deal with the data obtained from the images can become excessively complex and time-consuming for such high-dimensional datasets, and this makes it difficult to incorporate such systems into an industry that demands standard protocols or high-speed processes. Therefore, recent works have focused on the development of new systems based on this technology that are capable of analysing quality features that cannot be inspected using visible imaging. Many of those studies have also centred on finding new statistical techniques to reduce the hyperspectral images to multispectral ones, which are easier to implement in automatic, non-destructive systems. This article reviews recent works that use hyperspectral imaging for the inspection of fruit and vegetables. It explains the different technologies available to acquire the images and their use for the non-destructive inspection of the internal and external features of these products. Particular attention is paid to the works aimed at reducing the dimensionality of the images, with details of the statistical techniques most commonly used for this task.

Soil salinity is a widespread natural hazard that negatively influences soil fertility and crop productivity. Using the potential of earth observation data and remote sensing technologies provides an opportunity to address this environmental issue and makes it possible to identify salt-affected regions accurately. While most of the utilized methods and model development techniques for monitoring soil salinity to date have been globally considered and tried to detect salinity and create predictive maps with a single regression algorithm, fewer studies have investigated the potential of local models and weighted regression techniques for estimating soil salinity. Accordingly, this research deals with monitoring surface soil salinity by the potential of Sentinel-2 multispectral imagery using the geographic weighted regression (GWR) technique. The field study was conducted in an area that has suffered from salinization, and the salinity of several soil samples was measured to be used as a source of ground truth data. The most efficient satellite features, which accurately predict surface soil salinity by its higher spectral reflectance, were derived from the Sentinel-2 data to be used as explanatory variables in the analysis. The GWR algorithm was then implemented with a fixed Gaussian kernel, and the optimized bandwidth was calculated in a calibration process using the cross-validation score (CV score). The results of the analysis proved that the GWR method has a great capability to predict soil salinity with an accuracy of two decimal places. The visual interpretation of the local estimates of coefficients and local t-values for each predictor variable has also been provided, which highlights the local variations in the study site. Finally, the achieved results were compared with the outcomes obtained from implementing two global regression techniques, Support Vector Machines (SVM), and Multiple Linear Regression (MLR), which confirmed the higher performance of the GWR algorithm.

With excessive nutrient enrichment exacerbated by anthropogenic drivers, many standing water bodies are changing from oligotrophic to mesotrophic, eutrophic, and finally hypertrophic—negatively affecting ecosystem functioning, biodiversity, and human populations. Efforts have been devoted to developing novel algorithms for estimating chlorophyll-a (chl-a), cyno-blooms, and floating vegetation. However, to this date, little research has focused on freshwater lakes in the data-scarce Sub-Saharan African countries such as Malawi. We, therefore, estimated the trophic status of Lake Malombe in Malawi-a lake likely to be affected by eutrophication and algal bloom-emerging threats to freshwater ecosystem functioning globally—especially with the onset of climatic and anthropogenic drivers. We integrated in situ data with high-resolution Sentinel-2 Multispectral Imagery Analysis (MSI). We independently assessed the remote sensing technique using in situ data and tested the model at multiple stages. The scatter plot showed that most points were in the 95% confidence interval. The validation results between the measured in situ chl-a concentrations and the Sentinel-2 MSI-based chl-a retrieval had a root mean square error (RMSE) of 2.88 µg/L. The chl-a concentrations retrieved from MSI images were consistent with in situ data , indicating that the normalized difference chlorophyll index (NDCI) algorithm estimated chl-a concentrations in Lake Malombe with acceptable accuracy. Dissolved oxygen (DO), sulfate (SO 4 2− ), nitrite ( NO 2 - ) , soluble reactive phosphorous ( PO 4 3 - ), total dissolved solids (TDS), and chl-a, except for temperatures from the hot-dry-season, cold-dry-windy-season, and rainy-season, were significantly different ( P  < 0.05). The Sentinel-2 MSI imagery analysis also depicted similar results, with high chl-a concentration reported in March (rainy season) and October (hot-dry season) and the lowest from May to August (cold-dry-windy season). On the contrary, the ANOVA results for water quality parameters from all five points had P  > 0.05. The correlation matrix showed coefficients of (0.798 <  r  < 0.930, n  = 30, P  < 0.005), suggesting that Lake Malombe is homogenous. Our results demonstrate that integrating remote sensing based on MSI imagery and in situ data to estimate chl-a can provide an effective tool for monitoring eutrophication in small, medium, and large standing waterbodies—crucial information required to respond to global ecological and climatic dynamics.