Explore the vast range of titles available.

There is growing concern from scientists, policy makers, and the public about the contamination of natural and indoor environments with plastics, particularly micro/nanoplastics. Typically, characterizing microplastics in environmental samples requires extensive sample processing to isolate particles, followed by spectroscopic methodologies to identify particle polymer composition. Spectroscopic techniques are limited in their ability to provide polymer mass or advanced chemical composition (e.g., chemical additive content), which are important for toxicological assessments. To achieve mass fraction quantification and chemical characterization of plastics in environmental samples, many researchers have turned to thermoanalytical spectrometric approaches, particularly pyrolysis–gas chromatography/mass spectrometry (Py–GC/MS). Sample preparation for Py–GC/MS may be approached similarly to techniques needed for spectroscopic approaches (e.g., isolate particles on a filter), employ pressurized solvent extraction, or use ultrafiltration techniques to concentrate nanoplastics. Great strides have been made in using calibration curves to quantify plastics in complex matrices. However, the approaches to the pyrolysis thermal program, as well as calibrant and sample preparation, are inconsistent, requiring refinement and harmonization. This review provides a critical synthesis of previous Py–GC/MS work and highlights opportunities for novel and improved Py–GC/MS analysis of plastics in the future. Graphical Abstract

Microplastic (MP) pollution represents one of the biggest environmental problems that is further exacerbated by the continuous degradation in the marine environment of MPs to nanoplastics (NPs). The most diffuse plastics in oceans are commodity polymers, mainly thermoplastics widely used for packaging, such as polyethylene terephthalate (PET). However, the huge interest in the chemical vector role of micro/nanoplastics, their fate and negative effects on the environment and human health is still under discussion and the research is still sparse due also to the difficulties of sampling MPs and NPs from the environment or producing NPs in laboratory. Moreover, the research on MPs and NPs pollution relies on the availability of engineered nanoparticles similar to those present in the marine environment for toxicological, transport and adsorption studies in biological tissues as well as for wastewater remediation studies. This work aims to develop an easy, fast and scalable procedure for the production of representative model nanoplastics from PET pellets. The proposed method, based on a simple and economic milling process, has been optimized considering the peculiarities of the polymer. The results demonstrated the reliability of the method for preparing particle suspensions for aquatic microplastic research, with evident advantages compared to the present literature procedures, such as low cost, the absence of liquid nitrogen, the short production time, the high yield of the process, stability, reproducibility and polydisperse size distribution of the produced water dispersed nanometric PET.

The distribution and abundance of microplastics into the world are so extensive that many scientists use them as key indicators of the recent and contemporary period defining a new historical epoch: The Plasticene. However, the implications of microplastics are not yet thoroughly understood. There is considerable complexity involved to understand their impact due to different physical–chemical properties that make microplastics multifaceted stressors. If, on the one hand, microplastics carry toxic chemicals in the ecosystems, thus serving as vectors of transport, they are themselves, on the other hand, a cocktail of hazardous chemicals that are added voluntarily during their production as additives to increase polymer properties and prolong their life. To date, there is a considerable lack of knowledge on the major additives of concern that are used in the plastic industry, on their fate once microplastics dispose into the environment, and on their consequent effects on human health when associated with micro and nanoplastics. The present study emphasizes the most toxic and dangerous chemical substances that are contained in all plastic products to describe the effects and implications of these hazardous chemicals on human health, providing a detailed overview of studies that have investigated their abundance on microplastics. In the present work, we conducted a capillary review of the literature on micro and nanoplastic exposure pathways and their potential risk to human health to summarize current knowledge with the intention of better focus future research in this area and fill knowledge gaps.

Nanoparticles (NPs) have become one of the most popular objects of scientific study during the past decades. However, despite wealth of study reports, still there is a gap, particularly in health toxicology studies, underlying mechanisms, and related evaluation models to deeply understanding the NPs risk effects. In this review, we first present a comprehensive landscape of the applications of NPs on health, especially addressing the role of NPs in medical diagnosis, therapy. Then, the toxicity of NPs on health systems is introduced. We describe in detail the effects of NPs on various systems, including respiratory, nervous, endocrine, immune, and reproductive systems, and the carcinogenicity of NPs. Furthermore, we unravels the underlying mechanisms of NPs including ROS accumulation, mitochondrial damage, inflammatory reaction, apoptosis, DNA damage, cell cycle, and epigenetic regulation. In addition, the classical study models such as cell lines and mice and the emerging models such as 3D organoids used for evaluating the toxicity or scientific study are both introduced. Overall, this review presents a critical summary and evaluation of the state of understanding of NPs, giving readers more better understanding of the NPs toxicology to remedy key gaps in knowledge and techniques. A comprehensive landscape of the applications of NPs and their toxicity on health.

A comprehensive physicochemical characterization of heterogeneous nanoplastic (NPL) samples remains an analytical challenge requiring a combination of orthogonal measurement techniques to improve the accuracy and robustness of the results. Here, batch methods, including dynamic light scattering (DLS), nanoparticle tracking analysis (NTA), tunable resistive pulse sensing (TRPS), transmission electron microscopy (TEM), and scanning electron microscopy (SEM), as well as separation/fractionation methods such as centrifugal liquid sedimentation (CLS) and field-flow fractionation (FFF)–multi-angle light scattering (MALS) combined with pyrolysis gas chromatography mass spectrometry (pyGC–MS) or Raman microspectroscopy (RM) were evaluated for NPL size, shape, and chemical composition measurements and for quantification. A set of representative/test particles of different chemical natures, including (i) polydisperse polyethylene (PE), (ii) (doped) polystyrene (PS) NPLs, (iii) titanium dioxide, and (iv) iron oxide nanoparticles (spherical and elongated), was used to assess the applicability and limitations of the selected methodologies. Particle sizes and number-based concentrations obtained by orthogonal batch methods (DLS, NTA, TRPS) were comparable for monodisperse spherical samples, while higher deviations were observed for polydisperse, agglomerated samples and for non-spherical particles, especially for light scattering methods. CLS and TRPS offer further insight with increased size resolution, while detailed morphological information can be derived by electron microscopy (EM)–based approaches. Combined techniques such as FFF coupled to MALS and RM can provide complementary information on physical and chemical properties by online measurements, while pyGC–MS analysis of FFF fractions can be used for the identification of polymer particles (vs. inorganic particles) and for their offline (semi)quantification. However, NPL analysis in complex samples will continue to present a serious challenge for the evaluated techniques without significant improvements in sample preparation.

Nanoplastics (NPs) are increasingly recognized as pollutants in agricultural systems, yet their impacts on tobacco remain poorly understood. This study systematically investigated the uptake, translocation, and physiological responses of tobacco seedlings exposed to polystyrene (PS, 50 nm) and polylactic acid (PLA, 50 nm) NPs under hydroponic conditions. Both PS and PLA exhibited concentration-dependent effects. Low concentrations (10 mg L −1 ) moderately enhanced biomass accumulation (8.2-24.4%) and photosynthetic performance (21.6-33.5%), whereas high concentrations (100 mg L −1 ) significantly suppressed growth (9.4-30.2%), reduced chlorophyll content (6.0-14.9%), decreased photosystem II efficiency, and increased lipid peroxidation. Confocal microscopy revealed the presence of fluorescently labeled NPs in roots, stems, and leaves, indicating their uptake and translocation within tobacco seedlings. FTIR analysis detected characteristic PS (698 cm −1 ) and PLA (1758 cm −1 ) functional groups in plant tissues and revealed changes in the -OH and C-O-C bands, indicating the occurrence of oxidative stress responses and potential modifications in celluloserelated structures. Overall, the results suggest that NPs adversely affect tobacco growth through integrated mechanisms involving tissue accumulation, redox imbalance, and structural alterations. PLA exerted stronger inhibitory and oxidative effects than PS at the same concentration. These findings advance our understanding of the behavior and phytotoxicity of biodegradable and nonbiodegradable NPs in agricultural environments.

Plastics have enormous impacts to every aspect of daily life including technology, medicine and treatments, and domestic appliances. Most of the used plastics are thrown away by consumers after a single use, which has become a huge environmental problem as they will end up in landfill, oceans and other waterways. These plastics are discarded in vast numbers each day, and the breaking down of the plastics from micro- to nano-sizes has led to worries about how toxic these plastics are to the environment and humans. While, there are several earlier studies reported the effects of micro- and nano-plastics have on the environment, there is scant research into their impact on the human body at subcellular or molecular levels. In particular, the potential of how nano-plastics move through the gut, lungs and skin epithelia in causing systemic exposure has not been examined thoroughly. This review explores thoroughly on how nanoplastics are created, how they behave/breakdown within the environment, levels of toxicity and pollution of these nanoplastics, and the possible health impacts on humans, as well as suggestions for additional research. This paper aims to inspire future studies into core elements of micro- and nano-plastics, the biological reactions caused by their specific and unusual qualities.

The growing and pervasive presence of plastic pollution has attracted considerable interest in recent years, especially small (< 5 mm) plastic particles known as ‘microplastics’ (MPs). Their widespread presence may pose a threat to marine organisms globally. Most of the nano and microplastic (N&MP) pollution in marine environments is assumed to originate from land-based sources, but their sources, transport routes, and transformations are uncertain. Information on freshwater and terrestrial systems is lacking, and data on nanoplastic pollution are particularly sparse. The shortage of systematic studies of freshwater and terrestrial systems is a critical research gap because estimates of plastic release into these systems are much higher than those for oceans. As most plastic pollution originates in urban environments, studies of urban watersheds, particularly those with high population densities and industrial activities, are especially relevant with respect to source apportionment. Released plastic debris is transported in water, soil, and air. It can be exchanged between environmental compartments, adsorb toxic compounds, and ultimately be carried long distances, with potential to cause both physical and chemical harm to a multitude of species. Measurement challenges and a lack of standardized methods has slowed progress in determining the environmental prevalence and impacts of N&MPs. An overall aim of this review is to report the sources and abundances of N&MPs in urban watersheds. We focus on urban watersheds, and summarize monitoring methods and their limitations, knowing that identifying N&MPs and their urban/industrial sources is necessary to reduce their presence in all environments.

Microplastics (MPs) and nanoplastics (NPs) have become an important global environmental issue due to their widespread contamination in the environment. This review summarizes existing literature on the effects of MPs/NPs on three important biomarkers including enzymatic activity, gene expression, and histopathology in various organisms from 2016 to 2021 and suggests a path forward for future research. Application of enzymatic activity, gene expression, and histopathology biomarkers are increasingly used in experimental toxicology studies of MPs/NPs because of their early signs of environmental stress to organisms. Between 2016 to 2021, 70% of published studies focused on aquatic organisms, compared to terrestrial organisms. Zebrafish were widely used as a model organism to study adverse impacts of MPs/NPs. Polystyrene (PS) were the most important polymer used in experimental toxicology studies of MPs/NPs. Fewer studies focused on the histopathological alterations compared to studies on enzymatic activity and gene expression of different organisms exposed to MPs/NPs. There is a growing need to better understand toxic effects of environmentally relevant concentrations of MPs/NPs on enzymatic activity, gene expression, and histopathology biomarkers of both aquatic and terrestrial organisms.

Parkinson’s disease (PD) is a progressive neurodegenerative disorder characterized by the loss of dopaminergic neurons and the aggregation of α -synuclein, with increasing evidence implicating environmental factors and neuroimmune dysfunction in its pathogenesis. Micro- and nanoplastics (MNPs), ubiquitous environmental pollutants generated from plastic degradation, have recently emerged as potential biological stressors capable of entering the human body and accumulating in sensitive tissues, including the brain. Due to their small size, environmental persistence, and capacity to carry toxic additives and environmental contaminants, these particles can induce oxidative stress, impair mitochondrial and lysosomal function, and activate both innate and adaptive immune responses. This review summarizes current evidence linking microplastic exposure to neuroinflammatory processes relevant to PD, with a particular focus on microglial activation, astrocyte reactivity, peripheral immune involvement, and dysfunction of the gut–brain axis. Although a direct causal relationship between MNPs and PD has yet to be established, and direct human epidemiological evidence linking MNP exposure to PD is currently absent, the immunotoxic and neuroinflammatory effects of these particles suggest that they may contribute to disease susceptibility and progression. Elucidating the interactions between MNPs and neuroimmune pathways may help refine current frameworks linking environmental exposure, neuroimmune dysfunction, and PD susceptibility.